How to disable Windows XR updates. How to disable Windows update? Disable the update notification

Each operating system has an update function. Basically, this might be useful if you have unlimited Internet, and you want to always have an up-to-date OS. Yes, this has its advantages. But in this article we will look at how to disable Windows update XP.

Today, updating this OS is completely irrelevant, since the manufacturer has long stopped supporting XP and, alas, we will no longer see anything new from them on this topic. It is also necessary to disable the Windows XP update because it is a useless waste of computer resources, as well as the Internet, which is very expensive and pointless if you have limited traffic.

Most versions of XP have this feature enabled by default automatic update, so let's look at how to disable it. And this can be done incredibly simply.

How to disable Windows XP update

So, to disable updating Windows XP, go to system properties, to do this, right-click on the “My Computer” shortcut and select “Properties”.

In the window that opens, select the “Automatic Updates” tab and here, as has already become clear, check the “Disable Automatic Updates” checkbox. All. Then click “Ok” and enjoy Windows without updates.

Perhaps, after disabling the system update, the antivirus will scream. These messages of his can be safely ignored, since we have already sorted it out and realized that automatic updates of Windows XP are a completely useless thing, like flip-flops in a downpour.

Thanks to the automatic update function, the system receives software bug fixes, protection against found vulnerabilities, and new functions. Therefore, it is not recommended to disable it.

On the other hand, auto-updates can occur at inconvenient times and distract you from your work. And if you do not have a licensed version of Windows, but a dubious build, then the next update can break the entire system. In such cases, it is better to disable automatic updates for a while or even forever. There are the following ways to do this.

Method 1. Through the system services manager

This method is the simplest and is suitable for all - except the oldest - versions of Windows: from 10 to XP.

To use it, open the Run window (Windows key + R), copy into the field services.msc and click OK. When the service manager opens, go to the bottom of the list and double-click the Windows Update service. Then change its startup type to “Disabled” and click OK.

The changes will take effect when you restart your computer. If you want to enable updates again, repeat the above steps, selecting the startup type “Automatic” or “Manual”.

Method 2. Through the update center

In Windows 8.1, 8, 7, Vista and XP, you can disable the update in the Control Panel settings. Use this method if the previous one suddenly does not work for you (which is unlikely).

Although Microsoft has stopped supporting Windows Vista and XP and, most likely, will not update them; just in case, we will provide instructions for these versions as well.

Windows 8.1, Windows 8, Windows 7

Use system search to find “Windows Update.” Or open it through the Control Panel. Then click “Settings parameters” and in the list “ Important updates» select “Don’t check for updates”. Uncheck “Receive recommended updates in the same way as important updates” and click OK.

Windows Vista

Go to Start → Control Panel → Security → Windows Update. Then click “Customize Settings” and check “Don’t check for updates.” Uncheck “Include recommended updates when downloading, installing, and updating notifications” and click OK.

Windows XP

Go to Start → Control Panel → Automatic Updates. Check "Disable automatic updates" and click OK.

It's no secret that the operating room Windows system XP has many different vulnerabilities. Therefore, Microsoft employees try to periodically release special “patches.” As soon as hackers discover another loophole, the next Windows update is released to fix the discovered “holes.” And thanks to the service built into Windows, security updates are automatically downloaded to your computer. This allows you to quickly increase the level of protection of the entire system.

However, despite such a high usefulness of automatic updating, most users prefer to disable it immediately after installing a new OS. this service. This is due to the fact that in cases of using unlicensed Windows versions, new updates may block the use of the system. No matter what you fear for such things, you should simply turn off automatic updates. This is quite simple to do and will not take much time even for an inexperienced user.

Disable automatic updates

In order to disable automatic updates in Windows, you first need to go to the “Control Panel”. You can do it like this:

Disable the update notification

After turning off Automatic Updates, you will still receive a notification on your desktop asking you to update Windows. You can disable it in system services.

After completing all these steps, automatic updating will be completely disabled with the new starting Windows XP.

Back in the Windows XP operating system, the developers introduced a special service that was responsible for periodic updates. They were automatically downloaded via the Internet from Microsoft servers to the user’s computer, and the system determined whether to install them at the user’s request or automatically. Let's look at why they are needed and how to disable Windows 7 updates.

What are they needed for

According to the creators of the system, fresh updates have a positive effect on the operation of its program code. They specifically work to improve and optimize the functioning of computer processes in the system. As a result, all efforts are designed to improve performance. The computer should become more responsive, and various bugs and errors should disappear. Updates often also provide new features:

• diagnostic and troubleshooting tools are being improved;
• modern peripheral equipment is supported;
• new functions are added to the system;
• patches for the system are added Windows security and other useful things.

For those who have a licensed Windows system, installing such updates, as a rule, does not pose any threat.

But, based on the bitter experience of many computer owners, these updates are only needed if they are able to bring real benefit. But which one ordinary users will be able to determine in advance the usefulness of Microsoft's proposed improvements. If a game or program is unstable on a given operating system, it will tell you exactly what updates are needed. But when the computer works reliably, stably and does not produce unexpected glitches, then what is the point of updating if it already works quickly. As admins joke: “if it works, don’t mess with it,” but it’s better to completely disable Windows 7 updates. Often they can cause a lot of problems. Why take the risk and see if you're lucky?

Why might you need to turn it off?

There are several reasons for the question of how to disable automatic updates in Windows 7:

• The user has a pirated version operating system. And if you completely disable the update, the risk that the Microsoft server will issue a “red card” and limit the functionality of the operating system for using unlicensed Windows 7 is reduced to zero.
• There are often cases when an updated system unexpectedly issues critical error, which can only be fixed by a full recovery, and wondering how to disable auto-update in Windows 7 is clearly too late.
• The small size of the system disk, most often it is drive “C”. And since patch packages are very voluminous, then free place disappears instantly. Therefore, it becomes imperative to disable automatic updates on your computer.
• The need to wait for the computer to turn off after an update in Windows 7. Those who updated were faced with a situation where they needed to turn off the laptop, and a warning appeared on the monitor screen stating that this cannot be done, since “updates are being installed on Windows 7 1 of 1235 "! And the user must choose either an updated system or good sleep. Here you will inevitably think about how to prevent the system from updating.
• If the Internet is limited in incoming and outgoing traffic. For such users, the question of how to disable automatic updates of Windows 7 is also relevant.
• If the Internet channel has low speed, then it is better to disable this service in Windows 7 forever.

If at least one of the above reasons is relevant for your system, then it is better not to look for Windows 7 updates.

Well, now about how to disable updates. There are two ways. Let's consider each of them separately.

Disable completely

Before you turn off Windows 7 Update, must be found Management service. Let's consider the sequence of actions:

Once this service is completely disabled, the system will not be updated. But if you want to receive Windows 7 updates, if you carry out all the steps again, full functionality can be restored by changing the settings.

Disable only automatic update

If you want to reserve the right to download and install updates yourself manually, you can limit yourself to disabling automatic search.

Let's look at how to do this:

Now the system will search for updates, but will not install them automatically without the user’s permission. The owner of the computer can perform the manual loading updates from the Download Center by clicking the button Check for updates.

Disable system notifications

After these steps, search for updates and install them in automatic mode the system will not carry out. But that is not all. Since this is a negative event for Windows 7, it will still remind you of this with a flag with a red cross in the right corner of the monitor.

Let’s turn off this reminder of the changes made:

Now the red cross has disappeared and the operating system does not display any reminders.

But nothing prevents you from updating manually if you want. All you have to do is start searching for Windows 7 updates again.

Conclusion

Concluding this short description of why you need to update the system and how to disable the update service, we would like to remind you that each user can install the update manually, as well as disable the update service completely or partially. We hope these short instructions will help you. They are quite simple, but will keep your computer working for a long time.

Video on the topic

When working on a computer, some problems often arise. Of course, many people experience difficulties when fixing them, and sometimes they are associated with unsuccessful updates. Therefore, now we will take a closer look at how to disable Windows XP update. You can disable operating system updates permanently by launching Control Panel, and then going to System and Security - Turn automatic updates on or off. A window will open where, in the Important updates section, select Don't check for updates (not recommended). If you are not so categorical about updates, you can choose a softer option, for example, Download updates, but the decision to install is made by me.

Initially, before the update itself, create a restore point, which will help in case of any problems and return the system to its original state. To do this, you need to open: “Start”; "All programs"; "Standard"; "Service"; "System Restore". Then, select “Create a restore point” and click “Next”. A window will appear where you should write the name of the created point.

After the update, the system may slow down. In this case, open: “Start”; "Control Panel"; "Installation and removal of programms". Don't forget to find the "Show updates" item and check the box there. As a result, you will have a chance to remove installed updates. If this is not successful, then try restoring the system to an earlier state using the created checkpoints.

Remember that even if you did not create points, they are still there. Since the system automatically creates them when installing programs, drivers, etc. Find the window for restoring the days where the points are set. By clicking on the desired item, carry out the recovery procedure itself. The sad fact is that often this does not bring positive results. Therefore, I advise you to take installation disk and use it to reboot and start the system in recovery mode. The advantage is that your personal files will not be affected, and the changed files will be replaced with the original from the disk.

Another recovery method is proposed, which involves reinstalling the operating system in update mode. Your actions in this case are as follows: boot the computer, and then insert the disk with the OS. Select from the menu Windows installation. When a new window appears, select “Update”, then all personal settings, various programs and documents will be saved.

In conclusion, I would like to note that failures can always occur. Therefore, before disabling the Windows XP update, check and save important documents to external media or another drive. Good luck!