Setting up Tricolor TV channels on Samsung DVB-S2 TVs with the Tricolor TV MPEG4 access module installed. Setting up CI (CAM) modules Tricolor on TVs of different brands Setting up cam module Samsung 6 series

Channels can be configured in several ways:

You can use the operator's channel settings; to do this, you need to go to the parameters (settings) of the CAM CI module in the menu of your TV. Select “Update channel list” and then follow the on-screen prompts. Sometimes the TV itself may offer to use the operator’s profile to configure channels. Thanks to this search, we will get a proprietary channel sorting - News, Cinema, Sports, Everything, etc.

Or use a manual channel search (on some models this is the only way to configure channels).

For us, there should be a number - 10750 in the upper and lower ranges (sometimes there is only one line in the settings). Also check the name of the satellite - Eutelsat 36/Express-AMU.

Now you can start searching for channels, let's look at an example on an LG TV.

We go to the “Manual setup” item (sometimes this item is inactive, then you need to start the auto search and stop it immediately). Select the transponder frequency (if it doesn’t exist, you just need to create it). The frequency is 11881 and we start the search.

Now the same frequency, but with the “Search for network” checkbox active. This is how our TV will find all channels.

On Samsung TVs, you first need to delete channels following this path:

“Menu” - “Broadcast” - “Change channel”, then in the window that opens in the lower left corner, select “Select all” and then “Delete”. Afterwards we need to return to the “Broadcast” submenu and select “Channel Settings” - “Manual Settings”.

On Sony TVs, searching and editing the transponder can be done through auto search along this path:

“Home” - “Settings” - “Digital configuration” - “Satellite auto-tuning”. The “Antenna Configuration” item should be “Fixed Antenna”.

Let's continue:

“Next” - “Reset satellite settings” - then we repeat - “Digital configuration” - “Satellite auto-tuning” - “Antenna configuration” - “Next” - “Select scan type” (we need “Network scanning”, “All” channels, “All stations”)

Let's continue:

“Next” - “Satellite 1” - “LNB configuration (lower and upper bands - 10750).

Afterwards you need to go back using the “Back/Return” button and go to the “Transponder” item where we can set the frequency to 11881.

Then go back twice using the “Back/Return” button and press “start”.

To connect satellite or cable television you need special equipment: a receiver and a smart card that will convert the incoming signal from the provider to the TV. But, if the TV has a CI connector, then you can do without a receiver. You can install the module itself with a smart card in CI, and the signal decoding function will be performed through it. In this article we will look at setting up the CI Tricolor module on an LG TV and how to correctly install the CAM module.

The concepts of CI and CAM module are often confused or perceived as synonymous. CI (stands for Common Interface) is a connector into which the CAM module is inserted. CAM module (Conditional Access Module - module conditional access) is an electronic device that performs the function of an adapter or adapter. A smart card is installed in it, through which encrypted channels will be transmitted to the subscriber's receiver.

The CAM device must be selected depending on the encoding of the service provider. For example, to configure Tricolor, you will need the DRECrypt module. There are digital television broadcasting standards:

• DVB-T and DVB-T2 - terrestrial TV;
• DVB-C - cable TV;
• DVB-S and DVB-S2 - satellite TV.

CI can support either a specific standard or several. It all depends on the model of the TV receiver. If you are interested in satellite broadcasting, be sure to make sure that the built-in tuner on your TV supports it. Now a little about the advantages and disadvantages of the CAM module in relation to the receiver.

Among the advantages can be noted:

• High transmission speed, since data processing occurs wirelessly, directly on the TV;
• Transferable maximum quality Images;
• No need for an additional remote control;
• Longer service life;
• Lower cost.

The disadvantages include the following:

• It is not possible to view the TV channel program;
• The functionality and interface are more limited compared to the set-top box;
• There is no ability to show a large list of channels;
• The setup is more complicated (however, on LG TVs, when you select an operator, the corresponding channels are automatically selected).

What is included

The Tricolor TV company provides a choice of several sets of equipment for smart and regular TVs. Most include receivers, but some also have a CAM module. This set includes:

• Tricolor CAM module, compatible with television receivers that support the satellite standard digital television DVB-S2;
• Tricolor smart card for TV;
• Satellite dish;
• Satellite circular converter.

It is not necessary to take a ready-made set of equipment. It is important to purchase only a smart card from the selected service provider and enter into an appropriate agreement. Next, we’ll look at what requirements apply to the equipment for connecting the CAM module itself to the TV, as well as how to set up Tricolor television on LG.

equipment requirements

The first thing that a Tricolor user must configure is an antenna that must pick up the frequencies of one of the satellites: Eutelsat 36B, Express-AMU1, Express AT1. Then you won't have to post special settings CI slot: everything will happen in automatic mode.

One more caveat: the slot must be CI+. This is a new version of the CI connector with reverse encryption. That is, all information will be encoded before being sent to the screen. This allows the provider to protect their data from copying. Now not all content can be recorded from such a device, but only that which will be allowed for recording. The TV must have an LNB IN port, which indicates the presence of CI+ technology.

The TV must be equipped with a built-in digital tuner that supports the DVB-S2 satellite broadcasting standard. It is also desirable that the TV receiver supports 4K UHD (TV ultra high definition) and HEVC (High Efficiency Video Coding format). If such formats are not supported, channels broadcasting in the specified quality will not be available.

The CAM module must match the smart card encoding. The device is connected to the TV in the usual way: inserted into the CI connector. If the TV suddenly stops seeing the smart card, you need to check that the module and slot are connected correctly. After connecting to the connector, the access rights check will begin.

Sometimes the message about checking access rights can hang for a long time. To eliminate this, the time settings on the TV must be set to automatic mode. You can also try resetting the CAM module settings to factory defaults.

The built-in tuner gives certain advantages over the receiver: there is no need to purchase separate device, which will take up additional space.

Connecting and setting up the CI Tricolor module on an LG TV

Now let's take a closer look at how to connect and how to configure the Tricolor module on LG TVs:

• The TV must be turned off before installation;
• You need to insert the Tricolor card into the CAM module all the way with the contacts facing up, and the CAM module into the CI slot on the television receiver. The antenna cable must also be connected;
• Turn on the TV and look at the information on the screen. An error message may appear. The card or module may not be inserted all the way. You need to check the physical connection. To make sure that TV sees your device, it is better to go to the CI (CAM) menu, where this information will be displayed;
• Now you need to go to the settings menu. Find the items there " Fast" And " Channels»;
• In channel tuning mode, select “ Satellite" and press " Further»;
• Set the operator "Tricolor". The satellite must match one of the service provider's satellites. The settings are set automatically. The only thing you can check is the signal quality, which should be at least 70%. Its adjustment is carried out by adjusting the antenna and checking the connection of the cable and all other components;
• Now you can start connecting channels. To do this, you need to go to the channel settings and perform an automatic search. How newer version software, the more complete the final list will be. After the search is completed, the list is saved;
• If everything went well and you can open channels, you will also need to configure the sound for older software firmware. To do this you need to find " Setting up digital TV sound" and select " mpeg" IN latest versions firmware this problem is fixed;
• Now you need to perform a factory reset by selecting " CI data" This is necessary so that there is no message later that the access rights check failed. After this, disconnect the TV from the power supply. This completes the CI setup.

If the automatic channel search does not give satisfactory results, you can manual setting. To do this, you need to select a satellite and set its transponder frequencies to 12,111 MHz or 11,881 MHz, as well as horizontal polarization. When searching manually, be sure to check the box “ Network search».

On LG TVsthe default option is automatic search channels. It must be turned off, otherwise the channels you found will be reset.

After all operations, the TV turns on again and remains on for up to 8 hours. This is necessary to obtain service activation keys. In the CI data (CAM) menu you can find information about the smart card: identification number, connected packages and their expiration date.

Another important point is updating the module software. Detailed instructions can be found on the Tricolor website www.tricolor.tv. Do not forget about timely updating of the version, since software products that are too old do not perform all available functions or may refuse to work correctly.

The current version of the module software can be found in the settings: “ Information» -> « Module» -> « Software version» (item names may vary depending on the device model). To perform the update, you need to do the following:

• In the module settings, you should set the current status of pop-up windows to “ Activated" or " Included»;

Setting up and connecting the Cam module
Tricolor TV

Currently many modern televisions equipped with a built-in satellite tuner and a connector for a Cam module, which allows you to view TV channels from satellite operators. To view channels satellite operator Tricolor TV, it is advisable that your TV supports HD AVC broadcast standards (MPEG-4 H.264), which will allow you to view programs in both high quality HD and SD formats.

To connect the Tricolor TV Cam module to a TV, you need to purchase the following equipment:
1. Cam-module Tricolor TV;
2. Smart card (included with Cam module and one-year subscription);
3. Satellite dish;
4. Circular polarization converter;
5. RG-6 cable (or analogue) for connecting the satellite dish to the TV.
Next you need to install and configure satellite dish to the broadcast programs of the satellite operator Tricolor TV (Eutelsat W4/W7 36.0`E) and using a television cable and F-connectors, connect to the plug of your TV marked “SATTELITE”.
You can set up a satellite dish yourself, but for high-quality broadcasting it is better to contact specialists.

We carry out subsequent work on setting up the Tricolor TV Cam module directly with the TV:
1. Insert the smart card into the Cam module until it stops (according to the instructions on the sticker);
2. Insert the module into the TV connector;
We perform the first two points with the TV turned off!!!
3. Using the remote control, you need to reset the TV settings to factory settings. To do this, press the “menu” button and select: - “support” - “self-diagnosis” - “reset”, press the “OK” button, after which the TV will reboot;
4. After the reboot is complete, press the “menu” button, then select the “channel” --- “antenna” menu item and select the “satellite” submenu.

5. In the “channel” menu, go down to the submenu “ satellite system" and click "OK";
6. A window will appear asking for a PIN code, where we enter the values ​​- 0000 (by default), a list of satellites will appear, where you need to uncheck all the boxes next to the list of satellites, except for the satellite with the designation - Eutelsat W4/W7 36E (if you cannot uncheck the boxes marked satellites: remove the module from the TV and reset the TV settings again);
7. Go to the “satellite selection” menu and select the satellite - Eutelsat W4/W7 36E.

And in the LNB settings we indicate the following data:
Transponder - 12226 H
Lower gen. LNB - 0
Top gen. LNB - 10750;

8. Then go to the “manual settings” menu, look for transponder 12226 H and press the “search” button;

9. After scanning Tricolor TV satellite channels, press the “save” button.

This completes the setup of the CAM - Tricolor TV module, let's enjoy watching TV shows!!!
This material was reviewed on a Samsung TV; connecting and setting up the Cam - Tricolor TV module on TV models from other manufacturers is carried out in a similar way.

Setting up and connecting the Cam module
Tricolor TV

Currently, some modern TV sets are equipped with an integrated satellite tuner and a connector for a Cam module, which allows you to view TV channels from satellite operators. To view channels from the satellite operator Tricolor TV, it is better that your TV supports HD AVC broadcast standards (MPEG-4 H.264), which will allow your company to view programs in both the highest quality HD and SD formats.

To connect the Tricolor TV Cam module to a TV, you need to purchase the following equipment:
1. Instructions on what it really is, how to set up satellite Setting up satellite TV on Tricolor TV. How to set satellite influence on channels on lg tv. Cam-module Tricolor TV;
4.5. Smart card (included with Cam module and one-year subscription);
3. Satellite dish;
4. Don’t know how to set up Smart TV on Samsung TV» How to set up Smart TV. Radial polarization converter;
5. Correct setting Tricolor on Samsung TVs Tricolor on how to configure the module. Module for Tricolor TV Samsung DVB-S2 TVs. We reset the TV to as in the screenshot (10750. How to reset the settings on Samsung Galaxy S8 and S8. RG-6 cable (or analogue) for connecting the satellite dish to the TV.
Next, you need to install and configure the satellite antenna for the broadcast programs of the satellite operator Tricolor TV (Eutelsat W4/W7 36.0`E) and, using a television cable and F-connectors, connect it to the plug on your TV marked “SATTELITE”.

Tune

A satellite dish is an option without the help of others, but for high-quality broadcasting it is better to turn to specialists.

Next setup work

Cam-module Tricolor

We produce TV specifically with telecom:
1. Insert the smart card into the Cam module in full (according to the annotations on the sticker);

Module

CI on TV

Samsung

Process setting satellite channels Tricolor TV on Ultra HD brand Samsung. online store: .

Read also

How to remove applications from Smart TV LG, SamsungSmart TV is designed for the use of various integrated ones, as well as installation by the user required applications, also web access for TV. Smart TV provides a lot of necessary capabilities and...




How to delete an Instagram page if you forgot your password: and mail, via phone and computer Deleting Instagram if you forgot your password is a problem caused by various reasons. A person decides to delete a page due to lack of...




The computer does not see the network Several times I came across a problem in the comments that said that when setting up local network there were problems through the Wi-Fi router when the computer was under Windows control 7 did not see the computer in Windows XP. There...




An extraordinary true story, an average Netflix film. Yeh ballet release date. Friday on Netflix Written and directed by Sonia Taraporevala Julian Sands, Jim Sarbh, part of the cast of Yeh Ballet Manish Chauhan as Nishu in Yeh Ballet In the late 20s...




How to install a canon lbp 1120 printer on OS 10 x64. Download the Canon LBP 1120 x32 (x64) driver. Irkzus blog on IT abilities. equipment repair, website setup, SEO You can’t find official drivers for OS x64, it was easier for us at the workplace and...




Months ago, it was reported that older iPhones with low-capacity batteries were slowing down. Apple eventually confirmed that it was slowing down older iPhones that have naturally degraded batteries. The company took a lot of cotton for this...

Why you can't auto-tune

Tricolor channels

TV on Samsung TV

Manual setting TV Samsung to satellite Tricolor TV. How to set up WiFi (Wi-Fi) on Windows 8. Using Tricolor TV as an example, we will look at How to set up Tricolor TV on an LG TV. We configure it in such a way that it would be federal.
2. Insert the module into the TV connector;
We perform the first two points with the TV turned off.
3. How to set up Smart TV on a Samsung, Lg, Philips, Sony, Saturn TV. Connecting your Samsung TV to the Internet using network cable, wireless WiFi connections, WPS, Plug & Access systems. Using the remote control, you need to reset the TV settings to factory settings. For this

press the button

. “menu” and select:. "support". "self-diagnosis". “reset”, press the “OK” button, after which the TV will reboot;
4. How to set up a Samsung TV to receive channels. How to adjust sound on Settings digital channels on lg TVs. digital channels. After the reboot is complete

press the button

5. In the “channel” menu, go down to the “satellite system” submenu and click “OK”;
6. A window will appear asking for a PIN code, where we enter the values. 0000 (default), a list of satellites will appear, where you need to uncheck all the boxes next to the list of satellites, except for the satellite with the designation. Eutelsat W4/W7 36E (if you cannot uncheck the marked satellites: remove the module from the TV and reset the TV settings again);
7. How to increase Asus Eee PC? Replace its native module random access memory 512MB by 1GB. Go to the “satellite selection” menu and select a satellite. Eutelsat W4/W7 36E.

Read also

Headphones from mobile phone are found in each of us. Usually, such an ordinary, but so necessary device migrates between the pockets of jeans, a jacket and a bag, so it quickly burns out and needs to be replaced. Don't rush to take it out...




Looking for the best gaming monitor under $150? Your gaming experience largely depends on the monitor you choose. Along with the right pair of speakers, you need to enjoy an incredibly immersive gaming experience, provided you have a good...




How to enter the boot menu on my laptop and computer? Do you want to boot your computer from a USB drive or disk? For this purpose you do not need to log in BIOS settings. Especially if you don't know much about it. Ultimately, of course, more...




modelPrecautions when charging your phone It’s not easy to find outGT-S5560Solutions and adviceHow long a phone or tablet should run on battery power. The operating time of the battery depends on several. Unfortunately, we could not find a single re...

Tricolor TV is a company offering high quality television broadcasts. However, setting up the equipment to function properly can be challenging. The digital technology market is very large, and each manufacturer brings something of its own both to receiver models and to the TVs themselves. On most devices, setup is automatic, while others require a more “personal” approach. LG TVs belong to the second group.

Why LG's setup is different

In 2017, many companies changed their broadcasting conditions - a distinction was introduced between channels, which they now decided to sort in lists. This affected users in such a way that the list of offered Tricolor TV channels simply did not appear in the system, or appeared out of order/incomplete. LG TVs were especially susceptible to this problem, whose software turned out to be unable to support the new order.

Difficulties arose mainly in cases where users tried to search for channels using the “Quick Search” option. In this case, LG TVs did not perceive the signal decoding algorithms correctly, for which the company apologized more than once. Almost all of the company’s product lines for 2014-2018 were affected, and some still demonstrate this problem.

LG is actively developing new software that would support the formation of such lists that Tricolor TV uses. Its launch is tentatively scheduled for July 2018. However, this does not mean at all that Tricolor TV subscribers who have LG TVs at home should refrain from watching TV programs, since there is a way to get around the problem yourself - and it lies in a slightly different sequence of settings.

In addition, most LG TVs were equipped with a CAM module, which replaces the standard receiver - the connection and its configuration are somewhat different from the usual algorithm.

How to set up channels

Important! Everything below works on TVs running webOS.

Installation of the equipment must be carried out according to the instructions of Tricolor TV - installation of the antenna and dish, laying of cables. The company offers customers a full set of necessary devices to properly “dock” with a satellite and receive a signal.

One of the main stages is the installation of the CI+Cam module. In this case, the TV must remain turned off. It should be turned on after proper installation. The screen should display information about the equipment - about the card and the module itself.

Important! In some cases, at this stage, error No. 17 may occur, which indicates that the equipment was connected incorrectly, or the subscriber forgot to register with Tricolor TV with card data.

After all these preparations, the channels are configured like this (manually):

1. You need to go to the menu where you should find the “Advanced settings” item.
2. Select "Channels".
3. Select “Search for channels and settings.”
4. You should select the “Auto search” option, despite the fact that you are setting everything up manually. Here you can enter unique settings for Tricolor.
5. The search mode should be set to “Satellite”. If not, select it from the list.
6. Choosing a satellite TV operator is also an important option. For Tricolor today you need to click on “Other operators”.
7. Exit auto search - click on the cross, or press EXIT on the remote control. If you have version 3 or 3.5 of the LG axis and a Magic remote control, you should press and hold the Back/Exit button.

After this, you can start manually searching for channels.

1. Re-enter “Channel search and settings” through the advanced options menu.
2. Click "Manual Search" and make sure the reception mode is set to "Satellite". If not, change it to this mode.
3. Open the “Transponder” settings item and select ANY from the list, avoiding the number 12226/L/27500.
4. After that, click "Transponder" again.
5. Now select the option 12226/L/27500, and check if the “Add” button appears on the side.
6. Turn on “Network Search” - click on this item and change the value to “On.”
7. Click the "Add" option you found earlier. Wait until the end of the search and press EXIT.

Important! In some software versions, “Update” will appear instead of “Add”.

After this, the search for channels on the network will begin - during the search, the LG TV will check 22 transponders, and the result of such a check should be more than 300 channels, including radio and service arrays.

The list of channels will be formed in a special way due to the fact that new software has not yet been released for Tricolor TV. It will contain:

• Provide digital and satellite services and radio channels;
• The channel order is mixed up.

However, the list editor will be available, and you can easily select and mark those that the TV should skip from now on. The “Skip” function will help you hide them from the general list to make navigation easier.