Zyxel keenetic lite iii connection. Zyxel keenetic lite III: network setup with step-by-step instructions

It’s no secret to many that to set up any router you first need to log into it. This is done through any browser by entering . Next, authorization occurs - a request for a login and password. Moreover, by default this combination may differ between different router manufacturers.

In this article we will talk about the login and password that are set by default on Zyxel keenetic routers.

Login and password for logging into Zyxel keenetic by default

So, after you have entered the router address into the address bar of your browser, you will be prompted for a login/password combination.

On most Zyxel keenetic routers this combination is as follows:

Login: admin

Password: 1234

It is worth noting that when you first try to enter the settings, some Zyxel keenetic routers ask you to create a login password.

Request to create a login password

In this case, the default password 1234 may not be suitable.

What to do if the password does not match?

The only option in such a situation is full reset router. This will reset not only the login password to the standard 1234, but also all settings, including Wi-Fi settings and the Internet.

Reset is performed using a special Reset button located on the back panel of the Zyxel keenetic. You need to press it with something thin when the router is turned on and hold it for about 30 seconds until the power indicator starts blinking rapidly.

Reset button location

After this, your router will reboot and you can log into its settings using the default login and password.

1. By default, login is admin, password is 1234.
2. Courier-setters must change the password in the settings to the Serial Number indicated on the box (S/N). When reconfiguring, it is also recommended to use S/N as a password for the router and wi-fi ( serial number).
3. Resetting the router settings is done by pressing and holding the Reset button on the back panel of the router for 10 seconds.

In order to get to the router’s web interface, you need to open your Internet browser and type http://192.168.1.1, User Name in the address bar admin (Username), Password – 1234 (provided that the router has factory settings and its IP has not changed).

Changing the factory password.

Default: Login admin, password 1234.

In the router interface, you need to go to the “ System", Further password. In field "New Password" Enter a new password. It must be repeated in the next field.

Setting up Wi-Fi on the router.

In the router interface, you need to select the tab on the left Wi-Fi network, in the list that opens, select “ Compound».
We set the parameters as follows: Field " SSID": enter the name wireless network. The value in this field cannot be changed.
Apply».
Next, save the settings by pressing the button “ Apply».

1. Authentication method: WPA2-PSK.
2. Protection type: TKIP
3. Network key (ASCII): You must enter any set of numbers from 8 to 63. They also need to be remembered so that you can specify them when connecting to the network. It is recommended to use the device serial number as a key (indicated on the box as S/N ########).

Click the button below Apply»

Setting up an Internet connection.

InternetConnection" or " Authorization", it all depends on the type of Internet connection of your provider.

Setting up a PPPoE connection.

In the router interface, you need to select the tab on the left “ Internet", in the list that opens, select " Authorization»,

1.Internet Access Protocol: PPPoE
2.Username : Your login according to the contract
3.Password: Your password according to the agreement
4.MTU: 1472
5. Save the settings with the button "Apply."

Configuring PPTP (VPN) while automatically obtaining a local IP address.

In the router interface, you need to select the tab on the left “ Internet", in the list that opens, select " Authorization»,

1.Internet Access Protocol: PPTP
2.Server address: ppp.lan(or10.10.3.36)
3.Username: Your login according to the contract
4.Password:Your password according to the agreement
5. Save the settings with the “ Apply».

NAT when automatically obtaining an IP address (DHCP).

In the router interface, you need to select the tab on the left “ Internet", in the list that opens, select " Connection»

1. Configuring IP settings: Automatic
2. Save the settings with the “ Apply».

Saving/restoring router settings.

1. "System",menu "Configuration

To save the current router settings, you must press the button "Save". The settings file will be saved to the specified location on your hard drive.

To restore settings settings from a file, you must click the " Review", specify the path to the settings file, then click the button "Restore".

Attention! Button press "Reset" will restore factory settings!

The universal and most economical version of the router for working with wired networks and distributing a Wi-Fi network in the Kinetic family is the Zyxel Keenetic Lite iii. This device has a standard configuration (removable antenna, 5 LAN connection ports and one WAN, LED information panel) and software. You can easily set it up even on your own, which is why this step-by-step instruction was developed.

First things first, we need to connect the router and do some settings network connection in PC. To prepare the device for operation, do the following:

• Carefully unpack the Zyxel Keenetic Lite, take out all the components and find the antenna among them;
• On the back panel of the router, find the hole into which you can then connect the repeater;
• After installing the antenna, remove the power supply, insert the plug into the corresponding slot also on the rear panel and turn on the device;
• The color-coded connector is intended for incoming channel(WAN port). We insert a cable from the Internet provider into it;
• In one of the nearby ports we insert a cord connecting Zyxel router Keenetic Lite and network card your PC (included, short as standard);
• Set the extreme mode switch to the “Main” position;
• We press the power button and watch the indicator panel: approximately, after 15-20 seconds, the beacons of the connected Internet line, 1 user and, in some cases, Wi-Fi should light up.

Now our router is ready to go. You also need to prepare your computer:

• Turn on the PC and make sure that it sees the connected network (the indicator in the lower right corner will display the connection status);
• Right-click on this icon to open the Control Center, then look for the blue name of the network in it (opposite the word “Connections”).
• Click on it and then on the Properties button;
• Another window will appear in front of you with a list and the ability to scroll: scroll it to the very end;
• Having selected the fourth version of the Internet protocol, click on the properties button to open a new window;
• We set the selectors to automatically receive all parameters;
• Repeat the same for the sixth version of the protocol.

As soon as the manipulations described above are completed, you can proceed further.

Having opened any of the installed Internet browsers (browsers), enter the following address in the address bar, allowing you to access software devices – 192.168.1.1

Open the browser, enter http://192.168.1.1 in the address bar

Afterwards we need to do a number of operations:

• Enter the “admin” key in both authorization fields and click OK;
• In the welcome window that opens, select the web configurator;
• In response to the offer, we recommend that you immediately change the password (this is the access key to the device itself, and not Wi Fi or IPTV). Immediately after this, the router will reboot and you will have to log in again with the same login “admin” and a new password;
• Now you see the main web interface of the Zyxel router Keenetic III, pay attention to the menu (icons) below. In order to set up the Internet for Beeline, Rostelecom and any other, we need the same tab, second from the left, in the form of an icon global network- Internet;
• To configure all the main types of wired connections, go to the PPoE/VPN tab (top menu).

Now let's look at setting up each type separately.

Dom.ru and Rostelecom | PPPoE

For PPoE: This standard is used by providers such as Dom.ru, Rostelecom.

• Click on the button under the interface table and add a connection.
• In the table that opens, first of all we indicate the type we are interested in – PPPoE;
• In the fields below we indicate the authorization data from the provider (login and password) specified in the contract. If there is no password in the documents, call customer support and they will provide it to you.
• We check that in the first two selectors (at the beginning of the page) the “Enable” and “Use” checkboxes are selected;
• We apply the settings, check the availability of the Internet.

VPN

For PPTP: A fairly popular protocol that uses VPN servers.

• Add a new connection;
• Set the protocol type;
• If you previously created a separate interface, indicate in the appropriate line that Zyxel Keenetic Lite iii should use it, and not the standard “Broad Connection...”;
• Just as in the previous case, enter authorization data;
• We exhibit automatic setup IP parameters.
• We change the remaining fields, such as the protection method and service names, only at the request of the provider (if specified in the instructions);
• Save the settings and check the connection is working;

Beeline | L2TP

For L2TP: A new and promising type on which Beeline networks operate. The setup is practically no different from PPTP.

• Click on create a new connection;
• Select the protocol type L2TP;
• We leave the standard interface;
• We find the VPN address in the contract, which we then indicate in the corresponding field of the server address;
• Personal authorization data from the contract;
• IP should be configured automatically;
• We choose a protection method based on the information in the instructions from the provider (or we call the customer support service);
• We do not touch the remaining fields, we apply the settings;
• We check the availability of the Internet from Beeline;

If the connection does not appear or the router has already been configured previously, which is why you were unable to establish a connection, you can reset the Zyxel Keenetic Lite iii settings to factory settings and try again. The easiest way to do this is to find the Reset inscription on the back panel, above which there is a button recessed into the body. To press it, take a pen or something else with a thin rod. Hold this button down for 10-15 seconds. The router will reboot and start again with the original settings.

Wi-Fi setup

Wi-Fi communication is a type of radio waves through which Internet data packets are transmitted towards the user and the router. To set up new wifi channel, you need to open the web configurator again: enter the device’s IP address in the address bar, go through authorization with a new password, find the “Wi Fi” item in the bottom menu, click on it.

The window that opens contains a pool of wireless connection settings that is the same for any provider, be it Beeline, MTS or Rostelecom:

• Network name – write the name for your access point with a lowercase letter (some devices do not accept capitalized names well). You will see it on your computer and smartphone, opening the list of available Wi-Fi connections;
• The network key indicates the field for entering the connection password. Write down a combination of letters and numbers in it that will be remembered well and will not allow strangers to connect to your WiFi router.
• As a method of data protection, we install the most effective encryption protocol today, WPA2-PSK, which will protect information from theft (Rostelecom does not independently encrypt incoming and outgoing Wi-Fi traffic);
• The choice of channel can be left to the router by leaving the value “Auto” in the corresponding field, or you can set it yourself. This should only be done when there are too many networks around, operating in 1 channel (in this case, the speed of your connection will be low, check first);
• We do not touch the remaining fields.

Applying the changes. This completes the Wi-Fi setup for Zyxel Keenetic Lite.

P.S. Many branded routers, including devices from Rostelecom, have a pre-configured wireless connection, the details of which (name and password) are indicated on the bottom panel (bottom). But after resetting the data, these settings will be lost.

Setting up IP-TV

To view IPTV from Beeline or Rostelecom, you need to perform a few simple manipulations:

• We enter the web interface of the router, then go to the Internet tab of the bottom menu;
• Select the Connection tab in the top menu and click on the previously configured Broadcom Connection;
• We put a tick in the selector of one of the additional slots, in addition to WLAN (in the first line);
• Apply the changes and insert the cable for IPTV into the selected slot.

These settings can be made either over a wired connection or via WiFi. For additional information, you should refer to the documents supplied by the provider, especially if you have Rostelecom. And this completes the comprehensive setup of the Zyxel Keenetic Lite router! All other functions, including RDP, will become available without additional manipulations.

Found a typo? Select the text and press Ctrl + Enter

One of the most famous manufacturers of communication equipment has pleased its fans and consumers with a new generation 4g router. This cutting-edge development is based on new platform NDMS V2 and called zyxel keenetic. Before moving on to discussing specific issues related to, for example, setting and resetting the default password for zyxel keenetic, we will characterize the new system as a whole. To begin with, we will present the main technical parameters of the router, so that it is clear what we are talking about in principle:

• The entire hardware of the device is controlled by a Mediatek RT6586 processor with a frequency of 700 MHz.
• The router has 256 MB of RAM.
• For fast work in file-sharing networks, special firmware NDMS V2 is used.
• There is a built-in firewall and Torrent client.
• There are connectors for connecting flash drives.
• Wi-Fi module with two antennas.

In other words, it’s a pretty good configuration, and according to the developers, it’s also absolutely reliable. It is promised to download files at a speed of about 1 Gbit per second (you need to understand this correctly - not only the router, but also the provider must support this speed).

Router settings

Like others similar systems, zyxel keenetic has basic settings default. To view and edit them, you need to go to the device’s web interface at the standard address for most such devices: http://192.168.1.1. Initial settings zyxel keenetic authentication looks like this:

• Login: admin
• Password: 1234

You can change the router settings using the “Setup Wizard”. There are two ways to configure the device: quick setup and setup using the web configurator. To get started with the device and connect to the network, the first tool is enough. The second method is more suitable for flexible router configuration.

To initially configure zyxel keenetic you may need:

Specify the MAC address of the network card. This is not always necessary, because depends on the whims of the provider. If your provider requires a MAC address, you can find it out via command line by typing the command ipconfig /all there.

Provide the router with a static IP address, if available. If dynamic addressing is used, then this does not need to be done and the corresponding setting parameter should be set to “Automatic”.

Some providers require a password to access the Internet - this must also be specified in the router settings.

The remaining parameter values ​​can be accepted as default.

Why is authorization needed?

The password specified in the default settings of the router must be changed to an individual one. Otherwise, everyone (from those who are closest to you) will be able to create Wi-Fi connection to your device and use your network, eating up precious traffic. Therefore, only you and those you allow to connect to the Internet through your 4g router should know the password for zyxel keenetic.

It would seem banal? But many people forget to do this, getting carried away by experimenting with new equipment, and subsequently simply forgetting about this need. Let's assume that you did everything correctly and assigned a new password to the device.

Forgetfulness in this case can play a cruel joke on you: you can forget the new password and have problems connecting to zyxel keenetic.

All modems from this manufacturer have a universal password reset procedure. We will begin to describe it.

Reset authorization

To solve the problem described above, we offer step-by-step instructions with comments:

• The zyxel keenetic giga ii and similar models must have a button on the body with the inscription “Reset”. This button is intended to reset configuration parameters (including the device password) to factory settings. After clicking this button, the zyxel keenetic giga ii parameters should again take on the values ​​​​specified above in our note.
• Press the “Reset” button and hold it for 10 seconds. At the same time, watch the lights on the case: they should first blink, and then all go out at once. This is a sign that our goal has been achieved and the password has been reset. Some users do not wait for the allotted time and wonder why they didn’t succeed.
• Now you can go to the device’s web interface and re-enter the device parameters.

That, in fact, is all the wisdom regarding working with zyxel keenetic. You can always find more complete information about this device and its configuration on the Internet. If any other problems arise with this router, you should first read the instructions for the device, and only then start asking Google questions.

The quality of Wi-Fi in the house directly depends on the router and its operation. Usually, users do not even realize that the problem is hidden in the router. ZyXel Keenetic Lite III has won the trust of many people. It is reliable, high quality and at the same time inexpensive.

Today we will do short review models, but most of the article will be taken up by tips on setting up the ZyXel Keenetic Lite III.

Overview information

ZyXel Keenetic Lite III is a new Swiss-developed router. It boasts good speed (up to 300 Mbit/s) and high-quality service. It can connect to multiple providers and is protected from viruses and threats. To expand the wireless network, the “Adapter Mode” function has appeared - connecting Ethernet devices to a Wi-Fi network.

Advantages:

• Supports interactive television;
• It is possible to create wireless guest networks;
• Batch assembly of software;
• Working with services: DNS, Sky-DNS and Yandex-DNS.

Description:

• Manufacturing material – plastic.
• Device color: black.
• Router dimensions: 16.6 x 11.6 x 3.4 cm.
• Device weight: 200 grams.
• The antennas are on the side panel.
• At the back we will see switches and indicators.

Watch a video review of the model here:

Beginning of work

To successfully configure the ZyXel Keenetic Lite 3 router and connect it, you need to perform the following steps:

• Connect the device to the network by inserting the plug into the connector. Take out the power supply;
• Insert the cable from your provider into the WAN channel connector;
• Insert the cord that connects the router and the PC’s network card into the near port;
• Place the mode switch in the “Main” position;

The picture shows what modes the router can operate in:

• Turn on the device and the indicators should light up.

The Wi-Fi router is ready. All that remains is to configure the computer:

• First, start your PC and find the desired network;
• Next, click on the network icon with the right button and open “Control Center” and then click “Connection”;
• Open “Properties” and scroll to the end of the list. Starting from the fourth version of the protocol and up to the sixth, you set selectors to receive data.

Now you only need to take a few steps for stable wireless Internet. To do this, check out step by step instructions on setting up the router.

How to setup?

You can also watch the setup in video format:

To configure Zixel Kinetic Light 3 you need to perform the following steps:

1. Enter the address 192.168.1.1 into the address bar of your browser. It will allow you to open the control room. When logging in, you must specify your login and password: “admin”.

1. We'd better select "Quick Setup".
2. The configurator will prompt you to select a MAC address. But in most cases, service providers do not enable this option, so we select “My provider does not register MAC addresses.”
3. Click “Next”. A window opens where we are asked to configure IP protocol parameters. Select "Automatic".
4. Here is an authorization page for Internet access, where you need to specify the login and password provided by your operator. After saving the data, the router will work and the configurator will be available for more precise configuration.

Follow these instructions and you should not have any problems while connecting the router and setting up the Internet.

How to set up with Dom.Ru and Rostelecom?

How to configure the ZyXel Keenetic Lite III router to work with these providers:

• Open the Internet and switch to the “Connection” line, then open the “Broadband Connection” item;
• When you see the “Use connector” icon, you need to check the box there;

• Select “Without IP address”;

• Set the settings in the “MAC address” line to default.

After completing these procedures:

• You need to add a connection in the PPPoE/VPN item;

• Activate the “Enable” line and enter the name of your Internet connection. You must enter the name in Latin letters;
• Select the PPPoE protocol type, in the “Connect via” line, click “Broadband Connection ISP”;
• Enter your username, save the new options and start the router.

Setting up for L2TP connection

To set up this type connections (used in Beeline), we do everything the same until we reach the “Access Point” item. After:

1. In the “Access Point” item, we need to select the connection type (in our case, L2TP).
2. Enter the address “tp.internet.beeline.ru”.
3. Next, we set the parameters that we receive from the provider.
4. Select automatic IP configuration and save.

Setting up a Wi-Fi network

To ensure a wireless connection, do the following:

• In the Internet connection, select the “Wi-Fi” and “Access Point” section;

• In the “Network name” column, enter your login;
• Next, select the WPA-PSK + WPA2 – PSK column and open “Use connection protection”;
• Write the password in the “WPA Key” line;
• Activate “Access Point” and apply.

This completes the Wi-Fi network setup for ZyXel Keenetic Lite 3.

Security Settings

To protect your network from unauthorized intrusion, you can configure a firewall:

• Select the “Security” column in the device menu, then the “Firewall” tab;

• In the “Rules” column, indicate the name of your home network;
• We block access to unwanted hosts and specify hosts with unrestricted access;
• Click the “Add Rule” button and reboot the device.

To reduce access to the home network during a specific period when children are without parental supervision, use the “Parental Control” option :

• Let's go to " Home network", and then select the "Devices" tab;
• Select our device;
• In the “Network Registration” window that opens, check the “Permanent IP address” box and register;
• In the “System” menu, go to the “Schedule” tab, click “Add schedule”;
• In the “Schedule Settings” window that appears, set the operating period for the router and click the “Apply” button.

Update

To update the software on the ZyXel Keenetic Lite 3 router, do the following:

• We go into the interface and check the software version;

• If an update is needed, go to help.keenetic.com, where we download current version to your PC;
• Unpack and start installing the file with the .bin extension.

After installing the software, the router will reboot and will be available for use.

How to return the router to factory settings?

At incorrect operation If your network device is experiencing problems, you have lost your network password, or have other problems, you can reset it to its factory settings. There are 2 ways to do this: hardware and system.

The hardware method is very simple: to return to the original settings, you will need to press something thin on the special button“Reset”, which is located on the back of the network device.

The systemic method is also not complicated:

• Go to the “System” item, select “Configuration”;
• Press the “Reset” button;
• We confirm the action.

Pros and cons of the router

• The device interface is Russian;
• Convenient in functionality;
• High reception radius and device quality;
• Simple settings;
• The device is reliable;
• The device does not overheat;
• Reasonable cost (within 2500 rubles);
• Possibility of working in repeater mode.

About the repeater mode, see the following video:

• Low connection speed (maximum – 300 Mbit/sec);
• The support service does not always work well