DVB-S2 on LG TVs. How to watch satellite TV on an LG TV without a receiver (tuner)? Methods for connecting a satellite dish to a TV Satellite television without a receiver

Compared to terrestrial and cable television broadcasting, satellite television has many advantages. First of all, I would like to note the large number of channels. Thanks to such diversity, both adults and children will be able to find something exciting and truly interesting for themselves. The quality of the picture and sound also deserves special attention. As a rule, service providers connect a satellite dish to a television receiver. Installation fee is charged separately. However, knowing how to connect a satellite dish to a TV, you can easily cope with this task yourself.

A satellite dish, also known as an antenna, is a kind of mirror that easily reflects the signal from the satellite. This signal then goes to the converter, which transmits the data to the receiver. It is through the cable that is connected to the receiver that the television device receives the signal. Connecting satellite TV is not at all difficult.

What is needed for proper installation? A typical installation kit includes:

• The plate itself. It is she who translates the signal received from satellite dish, to the converter;
• Brackets and anchors. They are needed for fastening. These elements are selected depending on the size of the plate;
• Head, or converter. This device converts the signal received from the satellite into a digital one and transmits it further to the set-top box;
• Disek (Digital Satellite Equipment Control). This element is required to combine several converters;
• Cable. Regular TV cable;
• Receiver. This set-top box will allow you to watch public channels. If the user plans to watch paid channels, then it is necessary to select a device with a card receiver;
• F-connectors. They are necessary for connecting cables.

BeforeWhen purchasing a satellite dish, you need to carefully read its starter kit. The contents of some models may vary slightly.

Correct installation of the plate

It is best to install satellite dishes in an easily accessible place. This will allow you to easily and quickly fix the device or repair it in case of breakdown. The installation kit contains instructions that will help make the installation process quick and easy. By following the instructions, you can turn on satellite TV within a couple of hours after purchase. The following factors must be considered during installation:

• The bracket on which the plate is mounted must be attached very tightly. Otherwise, strong gusts of wind may tear the antenna off the roof or wall of the building;
• In order for the bracket to be stable, it must be installed correctly. For proper installation, the converter must be directed downward;
• In order for the cable to remain operational for as long as possible, it must be sealed and securely secured with zip ties or electrical tape;
• The plate must be mounted so that it can rotate freely in any plane. Thanks to this, it can be configured faster.

Initially, the antenna must be pointed south. In order for it to catch the signal well, there should be no obstacles or interference in its path, including buildings, trees, etc. Even the slightest obstacles can significantly degrade the quality of the received signal. Modern TVs are equipped with a DVB-S2 tuner. It allows you to watch satellite TV without a set-top box - a receiver. However, it is necessary to understand that dishes that are connected in this way will only be able to catch those channels that broadcast in a foreign language. To view domestic channels, you need to purchase a CAM module. Connects this device via PCMCIA connector. You can purchase such a module either separately or together with the starter package.

Connecting a dish to a TV without a receiver

Connecting a satellite dish directly to your TV has both advantages and disadvantages. To connect, you need to connect a TV cable with an F connector to the LNBSatellite input. Immediately after this, you can configure the channels. On television devices of today's popular brands such as Samsung, Philips, LG, etc., this process very similar. The only thing that can differ is appearance menu and item names.

After connecting the antenna, you need to turn on the TV, open the settings menu and select " Automatic channel search" The satellite must be noted as the signal source. After this, the user will be able to select the desired satellite. Of course, to watch satellite TV you need an element such as a receiver. True, modern TV models are equipped with digital tuners. This tuner gives the user the opportunity to watch satellite TV without a receiver.

So, by going to the settings menu, you will need to specify which channels you need and which should not be shown. So, if the user plans to turn on and watch exclusively free channels, you should specify that all encrypted channels should be skipped. Next, a search will be launched, during which channels are connected. Once it is completed, the user can immediately start watching satellite TV.

Connecting to a TV via a receiver

TV panels with a built-in tuner have several advantages over connecting through a receiver. First of all, there are no wires. Another advantage is convenient operation. In a particular case, you will have to control the channels with two remote controls (one for the TV, the second for the set-top box). At the same time, connecting through an external receiver is simpler. To connect the set-top box you can use:

• Antenna input;
• The familiar “tulip” (aka RCA) is used as an analogue television transmission;
• HDMI;
• Hardware connector;
• SCARD.

When connecting the receiver through the “tulip”, the user receives a low-quality picture. You can get a high-quality and clear image if you connect an antenna via HDMI.

Do not forget that in addition to its main purpose, the receiver can also perform additional functions. For example, it can easily play video or audio from a flash drive. With it you can view family photos in digital format. In addition, the set-top box allows you to connect your TV to the Internet. After connecting all the necessary cables to the receiver, the satellite dish will be installed. You need to turn on the TV and set-top box, after which you can start setting up.

Search channels

Setting up channels depends mainly on the device the user is working with. Thus, the Tricolor module without a receiver allows subscribers to watch satellite television at absolutely any time. Such a device replaces additional equipment. However, in order to connect such a module to a TV, the latter must have the appropriate connectors. It should be noted that all modern TV models are equipped with such a connector. But in older models it may be missing. You can determine the presence of a connector, as well as its location, using the instructions from the TV.

To manually configure channels using the Tricolor module (without using a receiver), you need to select and turn on on the TV manual setting. In addition, you need to enter the following parameters: modulation - QAM 64, transmission speed - 6900 ks/s. After this you need to enable search.

Don’t forget that the Tricolor module has several significant advantages:

• Allows you to unblock channels;
• Protects against illegal viewing attempts;
• Transmits only high quality signal;
• Allows you to save space;
• Significantly reduces energy consumption.

Thanks to fast and easy connection, as well as the above advantages, the Tricolor module is becoming increasingly popular. Moreover, with its help you can watch satellite TV without a dish. How is this possible? Initially, the phrase “satellite television broadcasting without a dish” seems absurd. However, in the common understanding of citizens of our country, “satellite television” does not mean receiving a signal from a satellite at all, but a set of channels that cannot be received on a simple antenna.

Tricolor without a dish will allow you to watch your favorite channels using Internet access. Movies and any TV shows in high quality are available to everyone at a network transmission speed of more than 10 Mb/s. It is very easy to access satellite channels in high quality. You just need to connect the input port of the Tricolor receiver and the output port home router. After this action, an automatic connection to the Internet will occur.

It should be noted that the Tricolor module was initially installed on a broadcast source such as a satellite. However, he can show without a plate. To do this, using the control panel through the installation menu, you need to set the broadcast mode to “ Internet" A general list of programs available for viewing will appear. You need to select one from the list and press the desired button on the remote control. Throughout the test period, Tricolor TV channels will be broadcast free of charge without a dish.

Possible problems

Connecting a satellite dish yourself can be quite difficult. Especially for those who have never encountered such a problem before. When connecting, the most common errors made are:

• Incorrect plate diameter selected. If the antenna size is incorrectly selected, it may cause deterioration in sound or picture quality during adverse weather conditions. This problem can only be eliminated by replacing the plate;
• The traverse is installed incorrectly. It should be noted that it must be secured below the bracket, and not above it. If done incorrectly, there may be signal problems;
• Pass-through sockets are used. If you use this type of socket, the signal may disappear completely. It is best to use the finished sockets that come with the television sockets;
• Using splitters or splitters. This element is suitable exclusively for analog TV. The fact is that satellite channels are transmitted in a form that a conventional splitter is not able to pass through;
• Using a large number of connections. This leads to the loss of a useful signal, which means the reception quality deteriorates.

What problems can arise directly with the Tricolor TV module? The most common problem is no signal. What is meant by this problem? If there is no image on the screen, but there is noise or just blackness, this does not mean at all that there is no signal. This screen indicates that the receiver is not connected to the TV. It should be noted that the physical connection and the cord inserted into both connectors do not guarantee that the TV can be seen by the receiver. In this case there is a connection, but the receiver may still not work.

If the TV receiver shows the message “No signal,” the problem can be corrected. To do this, click the button " Menu» on the receiver's remote control. If the main menu appears on the screen, it means that the set-top box is connected to the television device. If the menu does not appear and the “No Signal” message continues to appear on the screen, the problem may be that the TV does not see the receiver. In the latter case, you won’t be able to watch Tricolor TV.

How to watch encrypted channels on TV? To do this you need to get special access. A TV smart card allows you to get more features. Using the card, the equipment can decode encrypted channels. This means that the number of channels with the card on the TV will become much larger.

Now you know how to watch satellite channels on TV. It turns out that installing an antenna yourself is not at all difficult. An attentive person can easily cope with this task.

Note.

Equipment for digital television is what you can buy in our store. Our company has been operating in the market of broadcast and satellite equipment since 2003 and we already know most of our clients by sight.
For regular customers of our online store there is a system of discounts, which are calculated automatically according to the coupon number assigned to you personally.
All equipment undergoes pre-sale preparation, namely installation latest version Software for satellite and terrestrial set-top boxes. All receivers are tested for functionality.
Our company delivers equipment both in Moscow and throughout Russia. Most courier delivery companies have agreements on preferential delivery prices.
In our online store you can find almost any equipment that you may need to receive satellite and terrestrial television. We have tried to make the ordering process convenient for anyone. If you plan to order not one item, but several, then you can use the store search and pay attention to the accompanying equipment. If you want to pick up equipment for receiving satellite TV, then you should go to the tab menu " Satellite television", if for receiving terrestrial or cable TV, then " Terrestrial television" etc. If you have questions during the ordering process, you can use the online chat, which is located on each page of the online store, or request a call back.
We hope that in the online digital TV store you can spend a minimum amount of time ordering the required equipment.

The key advantage of satellite television is the ability to connect and watch it where other types of television are not available. Other advantages include high-quality image and sound, a large number of television channels for every taste. Moreover, many of them can be watched absolutely free.

Today, in literally every city there is a company that offers a set of services for installing and configuring satellite television. However, with some knowledge and skill, you can do this yourself. The main points of connecting satellite television will be discussed in the article below.

Literally at every thematic forum the idea will be voiced that a kit for receiving satellite TV can be assembled independently from individual components. But the solution to this problem is not for the average user. He simply does not have enough knowledge for this. Today there is an easier way out. It is enough to pay a visit to the nearest satellite television provider. At the provider’s office, you can sign a service agreement, buy a ready-made kit for receiving satellite television, and select the best package of channels for yourself in terms of price and content.

The average kit for receiving satellite TV includes (minimum set) the following components.

1. Plate - deflector, a reflector of satellite radio frequency radiation. Today, the provider offers the optimal characteristics of this element for a particular area. That is, 60 cm dishes for good coverage areas, 80, 90 or 120 cm for areas with weak signals.
2. Converter, necessary to convert high-frequency radio signals into electrical energy.
3. Mounting kit for fixing the antenna.
4. A rod for attaching the converter to the deflector.
5. Basic set of cables.
6. Receiver for signal conversion and connecting conventional TVs.

The equipment set can be expanded or reduced according to the user's wishes. For example, it will not be difficult to buy only an antenna, its mounting kit and a converter for those whose TVs are immediately equipped with a satellite tuner. Or purchase a more complex receiver instead of the basic version, including one with the ability to organize an in-house signal distribution network or connection to the Internet.

How to connect a TV to a satellite dish

There are 2 ways to connect a TV to a satellite dish:

• the cable connects directly to the TV receiver;
• connection occurs through the receiver.

Direct connection to TV receiver

As you know, a receiver is required to watch satellite TV. But in modern TVs started installing digital tuners DVB-S2, which make it possible not to use an external receiver, connect the cable to the TV directly from the “dish”, and catch TV from the satellite.

To find out whether your TV supports this function, you can look at the description of the device, which can be found on various websites that sell consumer electronics.

But, unfortunately, the TV will only receive free (not encrypted) foreign channels. To watch domestic TV via satellite, you will need to buy a smart access card that connects to the TV via a PCMCIA interface.

The card is purchased together with a suitable satellite TV package, which can be chosen from among the many operators offering this service. The convenience of using such a connection is obvious:

• there is no need to purchase a separate receiver;
• You only need one remote control to change channels.

How to choose a location to install an antenna

For an antenna to show good reception, it must be positioned and aimed correctly. The easiest way to solve this problem is espionage. That is, you can spy on where the antennas are installed on neighbors who also use the services of the same provider.

But a better course of action is to use the information provided by on the website of the telecom operator itself. Here, at a minimum, the satellite from which television channels are broadcast is indicated. Next, the user can:

• use interactive maps that are offered on the website of the satellite television provider;
• use applications that can be downloaded on the service operator’s website;
• install on your mobile device SatFinder program, which has an extensive list of satellites from which you just need to select the one you need.

The main thing that the user will receive based on such data and services is an understanding of on which wall of the house to install a deflector. This is the most important step. It is the correct placement of the antenna that will ensure direct visibility of the satellite.

Important! The height of the future location of the deflector is chosen so that there is no interference in the signal path in the form of tree branches, wires, large objects, or other buildings.

Accurate plate orientation

In the data that the user receives from the provider’s services or third party applications, there are horizon and azimuth indicators. They describe the orientation of the antenna in space to create a direct line of sight to the satellite. This will ensure effective signal reception.

This is how you should use this information.

1. Azimuth describes the rotation of the antenna relative to the north direction. That is, using even the magnetic compass of your phone, you can easily correctly rotate the deflector in the horizontal plane.
2. Horizon indicator describes the angle of inclination of the antenna relative to the vertical. To correctly orient the deflector, you will need a plumb line (weight on a string) and a protractor.

In order to make the work of setting up the antenna easier, you should immediately take some measures when installing it. Thus, a rod located at a great distance from the wall will allow you to rotate the antenna without the danger of blocking it. If the device is installed on a balcony, it is better to mount it on a corner, a vertical fence post or a concrete structure.

How to attach the antenna

The antenna is supplied with a mounting kit in the form of plates or a rotating block. To fix the device, you need to firmly tighten the bolts by tightening the corresponding nuts. This is done after fine-tuning the position of the device. The option offered by the manufacturer is quite reliable.

However, the antenna vibrates during its operation. She has a high windage and trembles in the wind. Birds land on it. Sometimes the latter arrange long gatherings there. Therefore, over time, the mount suggested by the manufacturer may weaken and the antenna will move. To prevent this from happening, it is recommended make reinforcements.

A simple option looks like this: the clamping nuts are duplicated. After it is finally clamped, another one is screwed on top of the main one. This is done very tightly. If there is a washer to prevent the joint from coming loose, it can be placed between the two nuts. The price of such strengthening is minimal, and its reliability is very high.

Therefore, the option of duplicating the clamping nuts on a conventional antenna mounting kit is preferable.

Cable preparation

When the installation of the plate is completed, you will need to prepare and a cable for connecting the antenna to the TV. The F connector is a simple grommet that is screwed onto the cable, so it is important that it is threaded.

If the output on your TV or receiver is adapted for an F-connector, then connecting the TV to a satellite dish will not be difficult. If your TV has a regular antenna output, you will need buy an adapter.

You can, of course, buy a regular antenna plug, but they are often of poor quality. In the case of an F-ki with an adapter, you get a universal plug that can be connected to both the F-output and the antenna.

Before connecting the cable to the TV, do the following.

Connection and setup

To prepare to watch TV, you need to do the following:

1. The plug must be connected to the TV connector called “LNB Satellite IN” (the setting is carried out using the example of an LG TV receiver).
   
   
2. Now, after connecting the antenna to the TV, you can turn on the device, go to settings and select automatic search channels.
   
   
3. When asked where to look for broadcasts, you need to select “Satellite” and click “Next”.
   
   
4. At this step, it becomes possible to select the required satellite for its subsequent scanning. Other settings related to this satellite are also available on this page. After selecting it, click “Next”.
   
   
5. When you select additional settings, a window with various parameters will appear, displaying values ​​related to the quality of the received signal, as well as its level. In the image below it is noticeable that the signal level is at maximum value. To add a new satellite, there is a corresponding button located at the top of the window. After closing this menu and clicking “Next”, you need to set the search conditions.
   
   
6. If you do not have a CAM module and want to find free broadcasts, then check the box next to the “Skip encrypted channels” line. After installing the necessary data, click on “Run”.
   
   
7. Next, the search for broadcasts will begin. During the search, you can see the number of TV and radio channels that were found. If you stop the search prematurely, the previously found channels will still be saved.
   
   
8. After the scanning is completed, you can start watching satellite TV. If you go to the TV settings in section “Channels”, then you can see many more options. For example, you can sort channels, edit a transponder, configure a satellite, etc.
   
   

To switch between different television signal sources, be it satellite TV or cable, HDMI signal or another, press the INPUT button on the remote control and select the required one.

Connection via receiver

How to properly connect a satellite antenna to the device? In modern television receivers, you can connect the cable to the TV through the receiver using the following connectors.

Thus, connecting satellite equipment to a television receiver is not a difficult matter. The main thing is the correct choice of antenna direction, connecting equipment with cables and setting up TV reception. You can learn about setting up the receiver yourself by watching this video.

Today, televisions that have receivers are very popular. Using these devices you can connect Built-in receivers in documents are displayed as a “DVB-S/S2” receiver. As a rule, most models with this function are produced with liquid crystal display. The most common manufacturers are LG and Samsung.

with the receiver?

In the case of built-in receivers, you need to pay attention to back panel TV. Regardless of the model, there should be an LNB IN connector there. It is intended for connecting a satellite dish. Additionally, an LNB OUT output must be present. With its help, you can connect a second receiver to the TV.

There is a VIDEO connector for video signal. His responsibilities include ensuring average image quality. Without AUDIO, you won't be able to hear the audio signal. The stereo headset connects directly to the TV or amplifier. The Internet port will allow you to take advantage of local network. Additionally, you can connect to a personal computer. Lastly, Smart TV is checked on the TV. An audio signal is supplied through this connector. In turn, the picture on the screen must be of good quality.

Setting up a TV with a receiver

Setting up the satellite DVB-S2 tuner built into the TV is quite simple. IN different models The menu is slightly different, but in general the instructions are the same. Setting up satellite TV in Samsung TVs as follows. First of all, you need to go to the menu. There should be a "Broadcast" tab there. Through it you can go directly to setting up the channel. When selecting a subsection satellite system, the TV will ask for the owner's PIN code. By default, manufacturers indicate 0000.

After a successful transition, you can select LNB settings. At this stage, it is necessary to check whether the system has found a satellite signal. If this does not happen, then you need to select the DiSEqC mode. Next, you can enter the menu and select a satellite signal. After everything has been done, all settings are saved without fail.

LG TVs with receiver

All TVs with built-in satellite receiver LG companies are produced with interesting lighting. Screen resolutions vary greatly between models. Generally, Smart TV is supported. Additionally, good viewing angles should be noted. Tuners are mainly installed analog and digital. The average screen scanning frequency is 50 Hz. At the same time, the update rate is around 100 Hz.

The audio system on a TV is usually two-channel. The power of one speaker is on average 5 W. Video signals are supported from 480p to 1080p. For convenience, manufacturers equip models with various connectors. They can be used to connect headphones, speakers or personal computers.

Model LG 24LB450U with receiver

This LG LCD TV with a built-in receiver has a resolution of 1366 by 768 pixels. This model has backlighting. The viewing angle of the TV is 178 degrees. Analog and digital tuner available. Image processor - "Triple". The sweep frequency is 50 Hz. The TV audio system has a special decoder installed. With its help, the sound is more voluminous.

All major video formats are supported by this model. Among other things, you can select a large number of component inputs. Standard antenna connectors are provided. Additionally there is a digital optical audio output. With a stand, the dimensions of this model are as follows: height 556 mm, width 384 mm, thickness 140 mm. The weight of the device is 3.7 kg. The cost of the model on the market is 12,000 rubles.

TV LG 22LB450U

The resolution of these built-in LCD TVs is 1366 by 768 pixels. At the same time, the viewing angle is quite large. Also worth noting is the good range of the image processor installed in the “Triple” series. The panel scanning frequency is 50 Hz. In this case, the update parameter lies within 100 Hz. The color system supports all major standards.

The audio system is installed two-channel. This model has two 5 W speakers. There are various sound and optimization modes. This model also boasts a wide range of video signals. Among other things, it should be noted the presence of expansion slots. The manufacturer provides a standard IPS matrix. The cost of this model is 10,000 rubles.

What is the difference between Samsung TVs and receivers?

TVs with a built-in satellite receiver from Samsung, as a rule, differ in their functionality. In this case, various contrast settings are provided. The resolution of many models is around 1920 by 1080 pixels.

Image processor - "Hyper". Among other things, it should be noted that the refresh rate is good. There is a picture-in-picture mode. Another thing worth mentioning is the color system. It works on PAL, SECAM and NTSC format standards. Video signals are received by the TV in the range from 480 r to 1080 r. Optical digital audio output is installed on most models. The energy consumption of Samsung TVs is acceptable. The average device voltage is around 106 V. When using the economy mode, only 45 V is consumed.

Model "Samsung UE40H5270"

These TVs with a built-in satellite receiver have a resolution of 1920 by 1080 pixels. Contrast system - "Mega". Additionally, many will be pleased with the pleasant backlighting of the TV. Smart TV support is provided. There are also two tuners available.

The image processor is of the "Hyper" class. With its help, the refresh rate increased to 100 Hz. The audio system is two-channel with stereo sound support. A USB port is provided by the manufacturer. There are also connectors for connecting to a TV personal computer. The dimensions of this model are as follows: height 908 mm, width 558 mm, and thickness 190 mm. The total weight of the TV is 8.3 kg. On the market it will cost about 30,000 rubles.

Summarizing

As a result, we can say that televisions with a built-in satellite receiver are undoubtedly needed and in demand. They are set up quite simply, and anyone can handle it. The models presented above are quite different from each other. The LG 24LB450U TV is in greatest demand. In pursuit of best quality Images can be seen of the Samsung model. The TV shown above is a pretty good choice.

Not so long ago, to view any satellite channels, you required not only a special antenna, but also a receiver, which is a receiver. Today, thanks to the latest developments, you can view Tricolor channels without it. Most modern TVs already have a built-in tuner that supports the necessary standards, as well as a slot for the CI module. Correct setting The antenna allows you to receive operator signals, so a receiver set-top box from the Tricolor provider is not required.

Antenna connection and module installation

To watch Tricolor TV channels, the antenna is connected to the F-connector, which is located near the regular terrestrial antenna.

This option has several advantages:

• minimum number of wires;
• All you need to control is the TV remote control;
• no need to look for a place to install the receiver;
• no need to buy a satellite receiver.

To decode Tricolor channels, it is enough to install a special smart card, as well as a module, without which you can watch only the minimum number of channels that are open. Removing or installing a module is carried out only when the equipment is turned off. The CAM module with the card is mounted in the PCMCI slot, with the barcode facing the screen.

TVs that already have DVB-S2 tuners installed are able to support these modules. They are a device in which a Tricolor card is installed and the whole thing is inserted into the connector from the TV. After the module is installed, the cable is connected and the TV itself turns on in search mode. In the menu, the satellite signal transmission source is set and the channel search begins. The system detects channels and remembers them, but in this case only information TV channels are open. These actions are carried out to check the functionality and compatibility of the module and the TV.

The next step is to register the agreement and activate the access card without a receiver. The procedure is carried out on the official website of the Tricolor TV provider, where a package of channels is selected, the card and contract number are entered. In this case, CI+ is placed in the field labeled “Terminal model”. This application is sent for subsequent verification and registration with the operator's company. During this time, the TV must remain on any encrypted channel of the selected package. Automatic connection occurs within two hours.

Module and manual configuration

The Tricolor module, which works without a receiver, allows subscribers to view channels at any time. It is a kind of replacement for additional equipment. However, in this case there is one main condition - the presence of an appropriate connector on the TV. It is always present on modern TVs. You can determine the location of this connector using the instructions from the TV. Operator satellite channels allows you to view channels through the module in high quality HD or digital SD format.

To manually tune Tricolor channels without using any receiver, you need to enable manual tuning on the TV in the corresponding menu. You also need to set the modulation parameters - QAM 64. The transmission speed should be 6900 KS/S, after which the search starts. This procedure is also performed for frequencies from 144000 to 394999KHz.

Main purpose of the module

The module used in the TV has several important purposes:

• it allows you to decode channels;
• protects against unauthorized viewing attempts;
• transmits a high-quality signal;
• saves space;
• reduces power consumption due to the fact that there is no receiver.

Due to its features and easy installation, it is now becoming increasingly popular. It can simultaneously decode one radio signal or Tricolor TV signal. However, the system itself can only support card identification numbers that have fourteen digits.

In addition, the presented map ensures correct operation when viewing the “Optimum” package. You can purchase the module in the official store of the satellite television operator Tricolor TV with various configuration options. You can also order various satellite equipment and necessary services here.

Best operator in Russia

Tricolor can rightfully be called one of the most modern operators in Russia, which tries in every possible way to offer its subscribers only the best services at competitive prices. The choice of packages is actually small, however, each of them includes a large selection of different channels for children and adults. We are very pleased with the affordable prices for the packages offered - you just need to pay from 150 to 900 rubles once a year and you don’t have to worry about anything. For a low cost, each subscriber will be able to watch their favorite TV shows and movies in the highest quality.

Tricolor TV has been operating for more than fifteen years and offers customers a variety of equipment and service support. And now customers can take advantage of a completely new and very convenient service for watching satellite channels without additional equipment - they only need to purchase a module that is inserted into the TV. There is nothing superfluous - no waste of money, no wires, no unnecessary equipment. Subscribers have only one thing left to do - enjoy a high-quality signal and a wide variety of channels from Tricolor.