Changing and disabling the screen saver in Windows. Enable or disable the screen saver Disable the Windows 7 screen saver through the registry

If you do not press the keyboard keys or use the mouse for a long time, then the computer thinks that the user is not working and has gone about his business. In this case, the preset picture turns on, after which the PC may turn off completely. This problem occurs very often when watching movies. Your computer's operating system is initially configured this way. But there are options for reconfiguring it. All settings are available, you just need to know which keys to press. In our article we will look at methods on how to remove the screensaver from the Desktop.

How to remove a screensaver in Windows XP?

Despite the fact that Microsoft has stopped supporting the Windows XP operating system, people still use it. It is usually installed on weak computers, since more modern versions of the OS can lead to severe slowdown and glitching of the device. This is why the Windows XP operating system is still in active use.

Let's look at how to remove the screen saver from the desktop of a computer or laptop using Windows XP:

1. Open the Start menu.
2. In the dialog box that opens, look for the “Settings” item and click on it.
3. Go to the “Control Panel”.
4. In the list that opens we find “Screen”.
5. Click on the selected item and press the “Enter” key.
6. Go to the desktop context menu and right-click on a random location on the screen.
7. A list appears, where we click on “Properties”.
8. In the “Display Properties” tab that appears, look for the “Screen Saver” tab and click on it.
9. Below the preview window there is a selection line where the name of the image that is currently active is displayed. Left-click on this line.
10. From the drop-down list, click on the line “No”.
11. Click on the “Apply” button.

From now on, the annoying screensaver is turned off.

How to remove a screensaver in Windows 7, Vista?

Today, most computers are running the Windows 7 operating system. And it’s not surprising, since it functions perfectly even if it’s not very powerful. powerful computers. There are several ways here. Let's look at them in more detail.

Method No. 1

To remove the screen saver from the screen of a computer or laptop with Windows 7, Vista:

1. Move the cursor to an arbitrary place on the Desktop and right-click.
2. In the window that opens, click on the “Personalization” subsection.
3. Find and click on the “Screensaver” icon.
4. Next, click on “Screen saver settings”.
5. In the list that appears on the screen, consisting of the names of the pictures, click on the word “No”.

Method No. 2

There is another way to delete a useless picture on a computer device. Let's look at how to carry out this process:

1. Right-click on any location on the desktop.
2. In the window that opens, click on “Personalization”.
3. In the lower corner, which is on the right side, find and click on the “Screensaver” item.
4. A list opens in a new window, scroll through it and find the recently installed picture.
5. Having made sure that the screensaver is present, we proceed to remove it.
6. Open the Start menu.
7. In the window that opens, find and click on the “Control Panel” subsection.
8. In the insert that appears, click on the “Programs and Features” section.
9. In the drop-down list we find our screensaver and select it with the mouse button.
10. Click on the word “Delete”.

As a result of these actions, the screensaver on the desktop of your computer or laptop is turned off.

How to remove a screensaver on Windows 8, 8.1?

Windows 8, as well as its updated version 8.1, has some special features. When the PC is idle for a long time, the operating system screen lock is activated. In this case, to resume work, the user has to re-enter set password your account in order to gain access to the OS again and the ability to further use it.

Important! The developers launched the Windows 8 lock screen for security purposes. If the owner of the PC is absent from his workplace for a long time, then other users are not able to log in to the system, since to do this they need to use the computer administrator account credentials.

For many cases, this order is not very convenient, and it is not always necessary. For example, the computer is installed for home use and there is only one user running it. If the PC is in turned on mode and the user is temporarily absent, then it will be inconvenient to enter a new password each time.

There is no way to directly disable the lock screen, since the user settings do not have such a function. In order to disable the lock screen, you must use the “Local Area Editor” group policy”.

How to remove the screensaver on a computer or laptop on Windows 8, 8.1:

• Go to the “Start” menu.
• In the lower corner on the left side there is a button with an arrow, click on it.
• In the dialog box that opens, select “Application”.
• The following list appears installed programs. In the upper corner of the right side of the screen we find the “Search” subsection, click on it.
• Enter the expression “gpedit.msc” and run the found program.

Important! In version 8.1 there is no need to switch to a tiled interface. Since the system is already equipped with a “Start” button, in order to launch the “Local Group Policy Editor”, you can proceed to using this button.

• Right-click on “Start” in the lower left corner of the display.
• In the dialog box that opens, click on the “Run” subsection.
• Click on the “Open” insert.
• Enter the expression “gpedit.msc”, and then click on the “OK” button.
• After downloading the application, the “Local Group Policy Editor” window opens.
• In the insert that appears on the left side of the display, select the “Policies” subsection and click on it.
• In the context menu, find and click on “Local Computer”.
• Select “Computer Configuration” and click on it.
• In the “Local Group Policy Editor” window that opens, select the “Administrative Templates” subsection and double-click on the folder.
• In the context menu that opens, open and click on the “Control Panel” folder.
• Select the “Personalization” subsection and click on it.
• Find the item “Prohibit display of the lock screen” and double-click on this folder.
• Information appears in the drop-down window indicating that the “Not configured” item has been activated by default.
• To disable the lock screen, activate the “Enabled” item, and then press the “OK” button.

After these steps, the OS will no longer launch the lock screen during prolonged downtime.

How to remove a screensaver on Windows 10?

Let's look at how to remove the screen saver from the desktop of a computer or laptop running Windows 10:

1. Right-click on free space Desktop.
2. In the window that opens, select the “Screen saver settings” subsection and click on it.
3. In the context menu, find and click on the “Personalization” subsection.
4. In the drop-down insert, open “Lock screen”.
5. Scroll down the scrollbar of the display, select and click on “Screen saver settings”.
6. Open the “Screensaver” section.
7. In the list that opens, select “No”.

Opening screensaver settings via Start

You can also use another method to open the “Screen saver settings” item. To do this you need to do the following:

1. In the context menu, find the “Start” tab and click on it.
2. Select and click the “Options” subsection.
3. In the tab that appears, find and click on the “Personalization” item.
4. Select and click on the “Lock Screen” folder.
5. In the window that opens, find the “Screen saver settings” insert and click on it.

Disabling the screensaver via search

To open the settings window, you can use the search:

1. On the taskbar, click on the search icon or press the Windows Key + S key combination.
2. In the dialog box that opens, use the drop-down search bar to find the required name of the picture.
3. As a result of the search, select and click on the “Disable” subsection.

Disabling the screensaver via the command line

There is another option to open “Screen Saver Options”. To do this you need to use the command line:

1. In the dialog box, press the keyboard shortcut Windows Key + R.
2. In the window that opens, enter, copy or paste the required command “control desk.cpl,1” and press the Enter key.
3. As a result of these actions, the “Screen saver settings” window will open.
4. To disable an unnecessary image, select the word “No” from the “Screen Saver” drop-down list, and then press the “OK” button.

How to remove a screensaver through the registry?

The Windows OS registry editor is used as a kind of “storage” for the system, which contains all the parameters and settings of both the OS itself and various programs. In addition, the Registry Editor contains many other functions necessary for the smooth operation of Windows. You can use the setting system registry to prohibit the launching of pictures when the standby mode is active.

How to remove the screensaver from the Desktop using the registry:

• On the left side of the screen at the bottom we find the “Start” button and click on it.
• In the dialog box that opens, find the line “Search programs and files” and enter the word regedit.
• Press the Enter key.

Important! If you are using the system under account user who is not authorized administrative rights, then in the insert that appears, a message will be displayed requiring confirmation of your action and prompting you to enter the administrator password. We enter all the necessary queries.

• In the window that appears, enter the text:

Windows Registry Editor Version 5.00

"ScreenSaveActive"="0"

Important! Did you know that when using different programs PC or laptop they can work in background, accumulate junk files and generally slow down the entire system? So that you do not have to face such problems, or if they are already observed, you have the opportunity to quickly solve them, we suggest you use step by step instructions and a review of the best software in the articles:

A screensaver, or screen saver, is an animation that starts playing on a computer screen when the user does not perform any actions using an input device such as a keyboard, mouse, or touchpad for a period of time. In the past, screensavers were needed to protect monitors from burn-in, but today they are used to customize the appearance of the operating system or for security.

Instructions

To change or disable the screen saver in Windows 7, open Control Panel. Select Personalization there. To do this, you can also simply right-click on the desktop, the Personalization item will be in the menu. At the bottom, you will see several icons, including Desktop Background, Sounds, Window Color. The one on the far right is the Screensaver icon. Click on it, a window for setting up the screensaver will open.

If your Windows version 7 does not provide personalization, then in the Control Panel in the search bar at the top right, type “screen saver”. You will see a list of items, by opening which you can disable the screensaver.

To disable it, select the line (No) in the list of screensavers, then click OK. The screensaver will no longer bother you.

If you have an operating system installed Windows Vista, then the sequence of actions is slightly different. Click Start -> Control Panel -> Appearance and Personalization -> Personalization -> Screen Saver. In the same way, select (No) from the list and click OK.

Windows XP owners can configure their computer as follows. Right-click on the desktop and select Properties. A window will open containing several tabs, including the Screensaver. Similarly, select (No) and press OK to turn off the screensaver.

Video on the topic

Helpful advice

Using a screensaver forces anyone who wants to use the computer to enter a password to log in. This greatly improves security, especially if someone other than you has physical access to it. Even if you don't like screensavers, you can still set your computer to lock after some time of inactivity. To do this, enable the "Start at login screen" checkbox, set the number of minutes after which the operating system will lock your PC, and then click OK.

Sources:

• Setting up your screensaver
• how to remove windows 7 screensaver

 Screen saver is a dynamic drawing or pattern that appears on the screen if the user does not perform any actions with the mouse or keyboard for a specified period of time. Screen savers were originally used to protect monitors from phosphor burnout while the computer was idle; this problem is no longer relevant and now screen savers are mainly used to customize a computer or to enhance its security using passwords.

How to open the screen saver settings window

To open a window Screen saver options right-click on the desktop and select from the context menu that appears Personalization

Also, in order to open a window Screen saver options go to the following path:

Start ➯ Settings ➯ Personalization ➯ Lock screen ➯ Screensaver options

You can open the screen saver settings window using the search. To do this, click on the search icon on the taskbar or press the keyboard shortcut + S, enter screensaver in the search bar and select from the search results Enable or disable the screen saver

Still open the window Screen saver options you can use the Run dialog box, to do this, press the key combination + R, in the window Execute type or copy or paste the command and press the key Enter↵:

As a result of performing any of the above actions, a window will open Screen saver options shown in the image below.

How to enable or disable the screen saver

In order to enable the screensaver, in the drop-down list Screensaver select any available screensaver and click the button OK

To disable the screen saver, in the drop-down list Screensaver select (No), then press the button OK

You can also use the Screen Saver Options dialog box to preview what your screen saver will look like before a specified amount of time has elapsed during which no user activity has occurred. To do this, click the button View. To end viewing the screen saver, simply move your mouse or press any key on your keyboard.

Setting up screen savers

Most standard screen savers do not have customizable settings. When you press the button Options instead of opening the screen saver settings window, only Announcement, which indicates that the selected screen saver has no customizable options.

By using GUI You can only customize two screen savers, this is the screen saver Volumetric text And Photos.

The image below shows the window 3D Text Screensaver Options, in which you can enable the display of the current time or change the standard text to your own, as well as select the font, change the type of rotation and other parameters.

Also shown in the image below is the window Photo screensaver options in which you can choose from which folder to show photos or images, as well as the speed of the slideshow or enable a random order of displaying images. For more information on how to install and configure photos as your screen saver, see ➯

Setting up screen savers in Registry Editor

Before making any changes to the system registry, it is recommended to either export the registry section (subkey) in which the changes will be made.

All standard screen savers can be customized using the system registry editor. Let's look at the settings of some screen savers, including those that can also be configured using the graphical interface (read above in the section Setting up screen savers).

 ● Screen saver Feeds
All screen saver settings that can be changed use settings like DWORD (32-bit).
To change screen saver settings Ribbons, the following content:

"CameraFOV"=dword:00000010
"RibbonWidth"=dword:3dfd2400
"NumRibbons"=dword:00000008
"Blur"=dword:00000001

Description of parameters:

● Parameter value CameraFOV
● Parameter RibbonWidth determines the maximum width of flying ribbons.
● Parameter NumRibbons is responsible for the number of ribbons that fly across the screen.
● Parameter Blur affects the tape trail. When setting the value to 0, the tape mark will not disappear. When set to a higher value, the tapes will rest on each other.
● Parameter values SpanMultiMon
● Parameter AllScreensSame used for computers with multiple monitors. There are only two values ​​available for this parameter. If you set the value of this parameter to 1, then the same configuration file will be used on all monitors and an identical splash screen will be displayed.

 

 ● Screen saver Geometric Waltz
Geometric Waltz

Windows Registry Editor Version 5.00

"CameraFOV"=dword:00000002
"LineWidth"=dword:00000014
"NumLines"=dword:00000006
"SpanMultiMon"=dword:00000001

Description of parameters:

● Parameter value CameraFOV affects the camera's approach; the higher the parameter value, the closer the tapes are displayed.
● Parameter LineWidth defines the maximum width of the line trace.
● Parameter NumLines is responsible for the number of lines that fly across the screen.
● Parameter values SpanMultiMon Only affects users with multiple monitors. Setting this to 1 allows the screensaver to move between the two monitors.

The result of making changes to the system registry is shown in the screenshots below.

 

 ● Screen saver Soap bubbles
To change screen saver settings Bubble create and apply a registry file with the following content:

Windows Registry Editor Version 5.00

"ShowShadows"=dword:00000001
"MaterialGlass"=dword:00000000
"ShowBubbles"=dword:00000001
"TurbulenceForce"=dword:499602da
"TurbulenceSpeed"=dword:00000008
"SpanMultiMon"=dword:00000001
"SphereDensity"=dword:4153a200
"TurbulenceNumOctaves"=dword:00000055
"Radius"=dword:42294180

Description of parameters:

● Using the parameter ShowShadows You can specify whether a shadow will be displayed under the bubbles. If you set the value to 0, there will be no shadow, and if you set the value to 1, a shadow will be displayed under the bubbles.
● Parameter ShowBubbles determines the screen color. There are also only two values ​​available for this parameter. If you set the value to 0, the bubbles will move on a blank screen, and if the value is 1, then the user's desktop will be visible when the splash screen appears.
● Parameter TurbulenceForce affects the color of the bubbles, and when set to 0, the color of the bubbles becomes black. To set the desired color, you need to experiment with this parameter. For example, in order for all the bubbles to shimmer in different colors, you can specify the value 499602da or 1234567898 in the decimal system.
● The parameter determines the average speed at which bubbles move across the screen. TurbulenceSpeed. The parameter values ​​can vary from 0 to 10, that is, the minimum speed is set to 0, and the maximum speed is set to 10.
● Parameter values SpanMultiMon Only affects users with multiple monitors. Setting this to 1 allows the screensaver to move between the two monitors.
● Using the parameter Sphere Density You can specify the exact number of bubbles that will move across the screen. In order to find a certain amount, you need to experiment. For example, to have only 4 bubbles move across the screen, enter the value 3d278480 or 1026000000 in decimal. The maximum value in the decimal system is 2100000000.
● Using the parameter TurbulenceNumOctaves You can specify the rate at which the color of the bubble changes. Values ​​available for this parameter range from 1 to 255. The higher the value of the parameter, the faster the color of the bubble will change. And, accordingly, if you set the value to 1, the colors will practically not change.
● Parameter Radius is responsible for the size of the bubble. Just like with the TurbulenceForce and SphereDensity parameters, you need to experiment a little to specify the size you need. The maximum value of the parameter is 435a6e80 or 1130000000 in the decimal system.

The result of making changes to the system registry is shown in the screenshots below.

 

 ● Screen saver 3D text
To change screen saver settings Volumetric text create and apply a registry file with the following content:

Windows Registry Editor Version 5.00

"AllScreensSame"=dword:00000000
"SurfaceType"=dword:00000002
"Specular"=dword:00000001
"SurfaceColor"=dword:0040ff00
"CustomEnvironment"=""
"CustomTexture"=""
"UseCustomColor"=dword:00000000
"UseCustomTexture"=dword:00000001
"UseCustomEnvironment"=dword:00000000
"MeshQuality"=dword:00000258
"Size"=dword:0000000a
"RotationSpeed"=dword:0000000a
"RotationStyle"=dword:00000001
"DisplayString"="site"
"DisplayTime"=dword:00000000
"FontWeight"=dword:000002bc
"FontItalic"=dword:010000ff
"FontFace"="Times New Roman"

Description of parameters:

● Parameter AllScreensSame used for computers with multiple monitors. There are only two values ​​available for this parameter. If you set the value of this parameter to 1, then the same configuration file will be used on all monitors and an identical splash screen will be displayed.
● Using the parameter SurfaceType You can select the text surface style. To set the Solid Color style, the value should be 00000000. To set the Texture Painting style, set the value to 00000002, and for the Reflection style, set the value to 00000001.
● You can display highlights using the Specular. There are only two values ​​available for this parameter. If you set the value of this parameter to 1, the highlights will be displayed.
●Using the parameter SurfaceColor You can specify the color of the text displayed on the screen. For example, if you specify a parameter value of 0040ff00, bright green text will be displayed.
● In a string parameter CustomEnvironment indicates the path to the image with reflection for the surface style of volumetric text in the format *.bmp.
● In a string parameter CustomTexture indicates the path to the image with the texture for the surface style of the volumetric text in the format *.bmp.
● Parameter UseCustomColor Another color. There are only two values ​​available for this parameter. If you set the value of this parameter to 1, then the color is taken from the SurfaceColor parameter.
● Parameter UseCustomTexture responsible for whether the checkbox is checked Select texture. There are only two values ​​available for this parameter. If you set the value of this parameter to 1, then the reflection is taken from the CustomTexture parameter.
● Parameter UseCustomEnvironment responsible for whether the checkbox is checked Select reflection. There are only two values ​​available for this parameter. If you set the value of this parameter to 1, then the reflection is taken from the CustomEnvironment parameter.
● The text resolution level is selected using the MeshQuality. This parameter can have 10 values. Namely: 00000064, 000000c8, 0000012c, 00000190, 000001f4, 00000258, 000002bc, 00000320, 00000384 and 000003e8.
● Parameter Size is responsible for the size of the displayed text. Available values ​​are from 1 to 0a (10 in decimal).
● Parameter RotationSpeed is responsible for the speed of text rotation. Available values ​​are from 1 to 14 (20 in decimal).
● Using the parameter RotationStyle You can specify the type of text rotation. There are 5 types of rotation – No, Torsion, Swing, Waves And Coups. To specify the type of rotation No, set the parameter value to 00000000. For type Torsion - 00000001, Swing - 00000002, Waves- 00000003, and to set the type Coups, the value should be 00000004
● Using a string parameter DisplayString You can set the text that will be displayed during the screen saver.
● Parameter DisplayTime is responsible for displaying the current time instead of text. There are only two values ​​available for this parameter. If you set the value of this parameter to 1, the current time will be displayed during the splash screen.
● Using the parameter FontWeight, you can specify whether the text style will be regular or bold. In order for the text style to be normal, specify the value equal to 00000190, and if you need to make the text with a bold style, specify the parameter value 000002bc.
● Parameter FontItalic is responsible for italic text. In order for the text style to be normal, set the value to 01000000, and for italic style - 010000ff.
● Using a string parameter FontFace You can specify the font for the displayed text.

The result of making changes to the system registry is shown in the screenshots below.

 

Other screen saver settings

Using the system registry editor, you can also completely disable the screen saver, select the specified screen saver, and also prohibit its modification, set the screen saver timeout, and specify password protection.

 Disabling the screensaver
Using this registry setting, you can prevent screensavers from running. To do this, create and apply a registry file with the following content:

Windows Registry Editor Version 5.00

"ScreenSaveActive"="0"

After applying the registry file, in the dialog box Screen saver options chapter Screensaver will become unavailable. As a result, you will not be able to change the screen saver settings.

 Prevent changing the screensaver
Using this registry setting, you can prevent screensavers from being changed. Additionally, the setting prevents you from using Control Panel and Personalization to add, customize, or change the screen saver on your computer. However, starting the screensaver is not prohibited.
For this setup, create and apply a registry file with the following content:

Windows Registry Editor Version 5.00

"NoDispScrSavPage"=dword:00000001

After applying the registry file, when you try to open a window Screen saver options using any of the methods described at the beginning of the article, you will receive a message Your system administrator has disabled the screen customization option in Control Panel.

 Applying the specified screen saver
When using this registry file, only the screen saver that was specified in the registry file is used. Additionally, this makes the screen saver drop-down list in the Screen Saver Options dialog box in the personalization control panels unavailable. In order for the registry file to be applied correctly, you must enter the name of the screensaver file, including the extension SCR. If the screensaver file is not in the directory %Systemroot%\System32, you must enter the full path to the file.

Windows Registry Editor Version 5.00

"SCRNSAVE.EXE"="C:\\Windows\\System32\\Mystify.scr"

 Screen saver timeout
Using the system registry, you can also determine the time of user inactivity, after which the screen saver starts. This setting can be set to an inactivity time value ranging from 1 second to 86400 seconds (24 hours). In the following example, the time is set to 60 minutes:

Windows Registry Editor Version 5.00

"ScreenSaveTimeOut"="3600"

 Protect your screensaver with a password
You can also set a password protection for your screen saver. When using the following registry setting, all screensavers are password protected.

Windows Registry Editor Version 5.00

"ScreenSaverIsSecure"="1"

At the dawn of the computer era, all progressive humanity used monitors equipped with cathode-ray picture tubes. The disadvantages of such picture tubes included burnout of the phosphor when a static picture was displayed on the screen for a long time, which led to a rapid decrease in the quality of the output video image and even failure of the picture tube.

To prevent this situation from occurring, the developers have included operating system Windows support screen savers, which are simple dynamically changing pictures. Modern monitors and screens are created using completely different technologies, free from the shortcomings of their predecessors, so you don’t really need to use screen savers.

Be that as it may, no one forbids you to enjoy the animation played on the screen when the computer goes into sleep mode. Windows 10 comes with several screen savers by default. To assign one of them, follow these steps:

1. Click the data search icon (or field) located on the taskbar next to the Start button. Enter the keyword Screensaver and press the key . In the search results pane, find Turn your screen saver on or off and click it. The Screen Saver Settings dialog box appears on your screen.

2. Click the Screen Saver drop-down button and select your favorite screen saver. After selecting your screen saver, click the Preview button to see its effect on the preview thumbnail. Review all available options in the dialog box before making your final decision.

Try using the Options button and changing the settings of the tested screen savers. Please note that sometimes changing screen saver settings (for example, slide playback speed) results in an effect that is completely different from the original.

3. If necessary, provide the screensaver with a secure login feature when the computer wakes from sleep mode by selecting the Start at login screen check box. This setting will not allow other users to access your computer during your short-term absence from your workplace. When you exit screen saver mode, Windows 10 will ask you to enter your account password.

4. Once you have completed setting all the operating parameters for the screen saver, click OK. The changes made are saved and take effect.

If you want to extend the life of your monitor (and save electricity), then ditch screen savers. Instead, manually put your computer to sleep, even if you leave it for a short time. workplace. To do this, right-click the Start button, select Shut down or sign out, and then click Hibernate from the drop-down menu. To “wake up” the computer, just press any key on the keyboard.