How to clean the head on a computer disk drive. How to fix the built-in optical drive in a laptop with your own hands

Burning files to disk is a proven method of saving important information in a safe place. True, there is one “but”: not always and everyone has a “blank” suitable for recording at hand. And if you are now faced with such a problem, do not rush to get upset ahead of time! After all, you can use absolutely any old scratch disk that you have to record data.

“Disk Studio” is a multifunctional one that will help you capture the folders you need from your computer and individual files onto any media, or erase unnecessary information from already full disks. Read the article and you will learn how to clean up the disk in this application.

Step #1. Download the program from the website

To get started, visit the special page on our website where you need. Once the download is complete, run the installation file and follow the instructions. Select the location where you want to place the program and wait until the archive is unpacked. Then start working with the application by double-clicking on the software icon.

Step #2. Launch the program and specify the desired option

The main menu of “Disk Studio” will open in front of you, where you need to select and specify the operations that the program should perform. The application allows you to work with both CD and DVD disc ami. You can quickly figure out how to clear a DVD disc of old files, and then burn songs, videos or any other data onto the selected media. To delete information from a disk, click on the “Copy and erase” tab and select “Erase disk”.

Step #3. Clear your disk of unnecessary files

A mini-menu will appear on the screen in which the program will prompt you to determine the working drive. This should not be a problem, because, as a rule, in most cases there is no choice: in computers and laptops there is only one, if no external device is connected to the equipment. Click the "Open Drive" button and insert the disk, then click "Erase Disk" and wait for the erase to finish.

Step #4. Rewriting an old disc

Unfortunately, there are some discs that cannot be cleaned. But they can be rewritten! In any recording option, specify for the program the files that you want to save to disk. Knowing about this and films, you will free yourself from unnecessary spending.

To rewrite an old disk, configure additional parameters: speed, the name that needs to be assigned to the disk, if necessary, request its verification and turn off the PC after recording is complete. Don't forget to insert the disc into the drive. When the program asks for confirmation to overwrite and delete files, click Yes.

Now you know how to clear the disk from unnecessary files. As you have already understood from the article, “Disk Studio” is a convenient software for working with disks. You can quickly write absolutely any information to external media or rewrite old disks, filling them with new and useful data.

You often come across the fact that a previously perfectly playable disc suddenly stops loading or the files loaded on it simply do not open, although the drive seems to have detected their presence. What happened in this situation? Is the drive broken or is it time to throw this disc in the trash? There are several ways to try to solve this problem yourself without drastic measures to replace the drive or remove the disk itself from use.

1. To determine whether the drive is the cause or not, you need to try playing several discs using it. And if he doesn’t read only a specific version, then it’s not his fault. If the situation repeats when discs stop reading or are problematic to play, then this is a problem with the drive.
2. In the case of a problem disk, you must first clean it of dirt. There are many means for cleaning them, but from experience we can say that there is no point in spending money on any liquids - discs can be easily treated in warm water and soap. After this procedure, they must be blotted with a well-absorbing towel and allowed to dry before placing them in the drive again.
3. In the case of a dirty laser read head of the drive, you can get by with purchasing a special “cleaning disk”. Or you can remove the drive from the computer and disconnect the protective cover by moving it backwards and upwards. Then you need to use something thin but strong, for example, a pin on the front panel through the hole, to press the latch and open the tray that blocks access to the lens by pressing on it. It is necessary to blow off large dust from the surface of the lens using a can of compressed air or even an ordinary blower, but in no case with your mouth. The pear must be without talc inside, otherwise everything will become even worse. Using a brush and lens cleaning liquid, you need to rinse the lens thoroughly, making light movements that do not press on it at all. After this, the lens should dry, and to prevent dust from getting on it again, it is better to cover it with something during the drying period. If plaque forms after drying, it must be removed with a dry soft brush. After this comes the process of assembling the drive.

The disc itself may not only be dirty, but also severely scratched, which also affects the ease of playback. It is possible to restore its surface by polishing. With large and deep scratches, it is unlikely that anything will work out, but if there are a lot of thread-like damage on it, this option can be “cured.”

The simplest method requires clean rags and goyim paste. The disc must be well wetted with water and a little paste applied to it, which must be spread evenly over the entire surface of the disc. Then, using a rag, you need to polish from the center of the disk to the edges until the paste simply disappears. The number of such processes will depend on the state of the disk after each stage. As soon as the disappearance of the most conspicuous scratches is noted, the disc can be considered to be polished. After polishing, the disc should be rinsed thoroughly, blotted and allowed to dry. After this, you can try to play back the recording.

And at the end, a little advice. If you need to download a driver for your printer, scanner, modem or laptop, you can always do this on the website www.hwdrivers.com or www.driver.biz.ua.

Related articles.

As I have written before in other articles, the biggest problem for a computer is dust. It gets packed in everywhere possible in such quantities that sometimes you are simply amazed. The DVD optical drive is no exception.

Dust, if the device is not cleaned, affects the operation of the drive tray, reduces the accuracy of the laser mechanism and affects the quality of the clamping mechanics. In general, your DVD drive should be cleaned at least once a year. Optimally - once every six months.

To clean and maintain the DVD drive, you will need lubricant, cotton swabs and alcohol. After removing the DVD drive from system unit, you need to remove its front panel. The first step is to pull out the drive tray. This is done using any long and thin object (a needle, a paper clip, a piece of wire 3 cm long).

There is a small hole on the front panel of any DVD drive (item 2 in the bottom photo). Behind it (on the inside of the panel) is a mechanism for manually opening the tray. You need to press this mechanism through the hole with a little force and the tray will extend 1-2 centimeters, after which it can be pulled out all the way manually.

Next, you need to remove the dust cover from the tray. To do this, you need to turn the drive over and, bending the cover with your fingers, pull it down. On the lid, as a rule, there are two latches (item 1 in the bottom photo) and two guides on which the lid is held. It comes off without much effort.

Next, you need to recess the front panel latches. As a rule, there are four of them (two on the bottom, two on the sides) or five (two on the sides, three on the bottom). After removing the front panel, unscrew the bolts (4 or 5 pieces) on the bottom cover of the DVD drive and remove the cover.

Then you need to take the DVD drive by the top cover and shake it slightly. The plastic drive mechanism will fall out of the top cover (see photo below). After removing the covers, the optical drive tray itself is removed. It extends all the way, then the latches located on the back of the tray in the corners are bent (see photo below) and the tray is removed.

All unnecessary parts have been removed from the DVD drive, you can start cleaning. The main body of the DVD drive has many notches, grooves and indentations. They must be thoroughly blown to remove any accumulated dust. Even a small amount of it at the back wall or in the grooves of the tray can cause the tray to stop opening (closing).

The tray is driven by a motor, which communicates with the mechanics by a rubber strap (passenger). You need to remove the belt carefully so as not to stretch it. The mechanical operation of the drive tray depends on the condition of the belt. By the way, problems often arise with the tray after long-term (more than two years) operation without maintenance. First, dust accumulates in the guides and the tray does not get into the extreme position because of this, and then the belt stretches due to the fact that the drive mechanism cannot open the tray due to the incorrect position of the tray.

Following the belt, remove the mechanical control board (1 or 2 latches). Care should also be taken not to damage the motor control cable coming from the main board. On inexpensive models, the cables may well be fragile or poorly soldered. We remove dust from the mechanics with a soft brush or air from both sides (top and bottom). Ideally, it is advisable to go over the entire DVD drive first with a brush and then blow it with air (for example, using a rubber blower, which is sold in any pharmacy).

After all the dust has been removed from the drive housing, the rubber parts are degreased with alcohol and the old grease is removed from the guides (usually by the time of maintenance there is a mixture of fine dust and dirt with a small amount of remaining grease).

Finally, the moving rubbing mechanical parts are lubricated with a small (tiny) amount of lubricant, just to form a film (no longer desirable). There should be no visible accumulation of grease.

The final touch is to blow through (only with a rubber bulb) the lenses of the laser mechanism (under no circumstances should they be wiped) and the drive is put back together.

Computers are an integral part of our work, everyday life, and leisure. However, with this widespread use and distribution of computer technology, ordinary users have certain difficulties with its operation. In particular, with regard to working with disks. How to clear a DVD disc of existing recordings so that you can produce new entry, not everyone can figure it out. And it's not as simple as it seems. To simplify this task as much as possible, it is better to use special program. and how to do it literally in one click he will tell and do it special application for recording CDs, DVDs and Blu Ray discs - “Disk Studio”.
How it works? Everything is elementary! Now you don't need to be a big computer professional to complete this task. Actually, like a number of others, now the problem will not be the question of how to clean a DVD disc, nor how to record a new one on it - music or video.

So, cleaning the media is a separate function in the program: select the desired drive with a disk and press the “Clean up disk” button. If necessary, you can now overwrite and clear again an infinite number of times.

Even more - the program opens up a whole range of new possibilities: creating beautiful design to your disk. For example, if you are compiling a home archive or preparing promotional materials for a presentation or handouts. You can choose a disk image or use graphics. Everything that might be necessary and everything that might come to mind is now easy, accessible and simple!

An important nuance is that working with the Disk Studio program, which can be downloaded, helps save all valuable data from loss or unintentional destruction.

"Disk Studio" is good decision for those who want not only to simplify their communication with technology as much as possible, but also to simply “keep up the brand” in everything. Order in your own archives and easy work will be ensured.