Put a ringtone on windows phone 10. Create your own ringtones for windows phone

Windows Phone has never been very different simple controls and a clear interface. These devices are not for the faint of heart. And after updating the system to version 10, some points became not at all obvious. For example,not everyone will understand New user such a gadget. Well, even an experienced WP owner won’t figure it out right away. Since modern people don’t really want to use standard sounds, let’s take a closer look at the issue of changing the ringtone.

Phones of this model are quite common among users. And if in the recent past, setting your favorite melody as a ringtone was quite simple. Since the appearance of software version 8.1, this possibility has been eliminated. It is not entirely clear what the developers were guided by, but now in order to hear pleasant sounds during a call, users have to show miracles of ingenuity and ingenuity

Previously, to change the sound settings and set the desired ringtone, the user did the following:

• I went to the settings or parameters section.
• I found the “Personalization” tab.
• In it, the “Sounds” subsection selected the desired melody and set it to the ringer.

Now, along this path, the owner of a Windows Phone sees only standard pre-installed ringtones. Despite the fact that their number reaches 55 pieces, there is a choice, but you must admit that such a ringtone can please few people.

Fortunately, it's not all bad. There are two ways that will allow you to change the standard composition to a more modern and suitable option.

The inquisitive minds of active users have found a solution to the problem,how to change ringtone in Windows 10 mobile. There are two options available for this. But before we analyze each of them in detail, it’s worth paying a little attention to the melody itself, which can be used instead of a bell.

• When choosing a suitable melody, you need to pay special attention to its duration. If the composition lasts more than a minute, the phone will cut it off on its own, leaving a fragment from the beginning of the ringtone. Often there is a loss at the beginning. Therefore, you need to independently cut off a 1-minute piece of melody using any suitable editor.
• The audio file format used must be MP3 or WMA (a licensed file format from Microsoft, similar to MP3) with a size of no more than 30 MB.
• There must be no DRM protection (technical copyright protection that does not allow manipulation of a specific file).

If the selected file does not meet at least one of the listed conditions, then it will not appear in the directory accessible through the settings and all manipulations will be meaningless.

So, how to change ringtone in Windows 10 mobile? What is needed for this and what available options exist.

Using a computer

In order to set the desired ringtone, you must first select a file with a musical composition that meets all the parameters. What conditions should be met were described above, we check for compliance and move on.

You need to connect the gadget to your computer using a USB cable. All other actions will be carried out using a PC.

Through “Computer”, open the Phone folder and select Ringtones in it. The selected and suitable file must be placed in the specified folder. When performing manipulations, it is worth paying attention that the work is carried out in the phone’s memory, and not on an external storage device.

After the file is placed in the desired location, disconnect the device from the PC. In order to check the presence of a ringtone in the desired folder and set it for a call, you need to go to settings. If everything is done correctly, the desired melody will appear first in the list of available ones. If the file is not displayed, you need to check it again for compliance, and then make sure that it was added to the phone’s memory and not to external storage.

Via the app

The first option is quite labor-intensive; in addition, not everyone has a cord on hand to connect the gadget to a computer. To simplify the process it was developed special application solving the problem.

To resolve the issue,how to change ringtone in Windows 10 mobileyou need to download and install the program on your device Ringtone Maker. It is recommended to download such programs exclusively from the device Market; files from third-party resources can infect the device with malicious software and cause serious damage.

After the program is installed on your phone, you need to open it and start creating a new ringtone. The advantage of the application is that it independently converts the desired fragment into a melody that will be accepted by the gadget’s system. All music files on the phone, both in the memory of the phone itself and on external media, are available for setting as a ringtone through the application.

As soon as the desired file is selected, the program will show a melody duration scale; on it you need to indicate the segment required for the sound, lasting no more than a minute. Save the result and close the applications.

To set the melody, just go to the settings again and, by analogy with the previous result, check for the presence the desired file in the list of available ringtones. Set the ringtone for the call and get the desired result.

Setting your own ringtone in Windows 10 mobile is quite difficult. It is impossible to do this using the functionality of the smartphone itself. Using a computer to solve a problem gives the desired result, but is not suitable for everyone. This option is more suitable for experienced users. The application solves the problem quickly and without difficulty. At the same time, it allows you to set a wide variety of melodies at the user’s request without using additional devices.

A rather strange feature of Windows 10 mobile version is the inability to set a call signal standard means. The same problem was observed in Windows 8.1. Much water has passed under the bridge since then, but the problem has not been eliminated to this day.

Initially, it is not possible in the corresponding smartphone menu to go to any other audio storage libraries except the standard one. It is difficult to determine what exactly caused such an inconvenience in the OS, but there are still several ways out.

In Windows 10 Mobile, the ringtone is set using one of the presented methods: using a computer or the standard Ringtone Maker program.

Setting a melody using a PC

To perform the ringer replacement procedure in Windows 10 Mobile using a PC, you must also have a USB cable to connect the devices. The action is performed via a PC on a smartphone and for this you need:

• Go to the "Options" menu;
• Then select "Personalization";

• Follow the “Sounds” section;
• Connect your computer and smartphone using a MicroUSB cable;
• After connecting to the PC, in “My Computer”, you will see the new “Windows Phone” equipment in the “Devices and Drives” column, go to the folder;

• Next, select the “Phone” directory;
• Go to the “Ringtones” section;

• From your computer, copy the melody you need and paste it into the “Ringtones” folder;
• Next, on your smartphone, in the same “Sounds” section, select the “Ringtone” option. Now, along with the standard signals, the newly downloaded song will also be here, select it and apply.

Initially, the “Ring tones” column contains standard sound options, quite a lot of them (about 55 melodies). This doesn’t raise the prestige of Windows too much, but it at least somehow compensates for the lack of the ability to change the ringtone on Windows 10 Mobile.

As you complete a simple but time-consuming procedure, difficulties could arise; it is important to note that when selecting directories in a smartphone via a PC, you must go into the phone’s memory, and not MicroSD. The presence of a non-standard format can also be a problem; the condition for the ringtone to work is that the file must be processed without an additional player. The smartphone supports MP3, WMA and some other specific formats will not work.

Also, the ringtone should not weigh more than 30 Mb. Make sure that the file does not use DRM protection - this is a technology for blocking various actions with files. It can be in quite different formats; usually songs from licensed discs have such protection. If the problem is in the format or protection, then you can simply download the song from any Internet source in the usual extension.

Setting a ringtone using Ringtone Maker

This is the way to change the ringtone Windows call 10 Mobile, more easy to use. Essentially Ringtone Maker is additional means, which is recommended for use by Windows Corporation. It is thanks to such a program that you can create a ringtone from any song, without the need for additional devices. In Windows 8.1, this application performed the same role, only it was not a pre-installed program; now it comes as standard. To replace the call you need:

• Go to the Ringtone Maker extension from the corresponding menu;
• Click on the “Select a melody” button;

• Using a kind of Explorer, specify the path to the file and select a melody by clicking on it;
• The entire composition is displayed as a minute scale. On it you need to trim the section of the song that you want to set as a ringtone. To do this, move the two sliders. The length of the melody can vary from one second to a minute. Click Save, the button is located at the bottom of the screen;

• After the trimming and saving action, the file will appear in the “Sounds” section. You can go here like this: “Options” - “Personalization”;
• Select Ringtone and find the ringtone you created, then apply it.

After completing one of the proposed procedures, your smartphone will ring with any melody you choose.

There are two types of melodies that are triggered when a call is made: the first type, which was sorted out, is a ringtone that notifies you that someone is calling, the other option is a melody that is heard instead of beeps to the person who is calling. To set a melody for a call in the second case, you need to contact the operator or special services, since there are no easy ways to set the music for a call yourself.

The procedure for replacing the ring tone is quite easy, but requires a certain amount of time. But after completing the steps, the smartphone will stand out significantly among many others and you will be able to enjoy your favorite music even more often.

If you still have questions on the topic “How to set your own ringtone for a call in Windows 10 Mobile?”, you can ask them in the comments

if(function_exists("the_ratings")) ( the_ratings(); ) ?>

For transfer music track In your phone, you need to connect the device to your computer via a USB cable. Then select the folder with the phone, after that go to “Ringtones” (do not confuse it - the folder should be in the smartphone itself, and not on removable media)

Copy the desired melody to this folder.

Now you need to set this melody as a ringtone on your smartphone. Go to “Options” - “Personalization” - “Sounds”. Now from the drop-down list you can select the melody that we downloaded to the “Ringtones” folder.

How to change the ringtone in Windows 10 Mobile using an application

IN Windows store There is a special application that quickly and easily allows you to set your song as a ringtone. It's called Ringtones Creator.

After installation, launch the application, click on the “Open” button, then select the desired track from the Misic folder and click on the checkbox.

Ringtones Creator has the ability to set only a certain section of the song to ring a call. To do this, you can move the first and last points on the scale.

How to free up phone memory by deleting temporary files in Windows 10 Mobile

Many smartphone owners are tired of the tracks installed in gadgets by manufacturers. They like to use beautiful ringtones and songs for incoming calls. Of course, in modern mobile devices Oh, there are a lot of standard music files, but the owner of a modern phone may not like them either.

How to set a ringtone on a Windows phone yourself

The user thinks that they can simply select the track they like and download it. But then it turns out that not every melody can be played incoming call due to volume, duration and other parameters. Therefore, the owner of the smartphone is interested in the question: how to set a ringtone windows phone yourself?

You can do this process yourself, but the main thing is to follow the steps of the short instructions.
First, you need to select a track and trim it so that the size of the music file meets the restrictions of the mobile device manufacturer. To do this, you can use one of free programs for editing audio files (there are many similar applications on the Internet), for example, Audacity (you need the LAME codec):

The file with the resulting melody will be placed on the desktop of your computer (laptop). It should be copied to your phone.

How to set a ringtone on a windows phone from a computer (laptop)

It should be remembered that before installing a ringtone on a Windows phone from a computer (laptop), these devices should be connected with a USB cable.
Most in a simple way transferring a prepared track to ringtones involves moving it from the tracks folder on your computer (laptop) to the “Ringtones” folder on your mobile device. This music file can then be found in the Customizable section. However, there are other methods.

How to add a ringtone to windows phone using special applications

If you have the Zune synchronization application installed on your computer (laptop), you can use it to copy the prepared melody to your smartphone. To do this you should:

1. Download Zune.


2. Select the “Collection” option, then “Music”.


3. By default, a folder called "My Music" will appear.


4. To copy the desired music file, left-click on it computer mouse and transfer it to the phone icon. The recording will happen automatically.

To check the result, you need to enter the “Settings” menu on your smartphone, then select “Melody + Sounds” and “Ringtone”. The copied file should appear in the Customizable section.
When used to listen to tracks on a computer iTunes program, then with its help you can answer the question of how to add a ringtone to a Windows phone. To do this you need:

1. Select a track in iTunes.


2. In the “File” menu, select “Get Information”.


3. Click "Genre".


4. Add a track.


5. Click "OK".

How to set a ringtone on windows phone 10 from a finished music file

There are many ready-made music files to set as a ringtone for Windows Phone 10. The user can choose the option they like from a fairly large list of tracks and copy it to their gadget. Or, before cutting his own melody, he can check whether there is one among the ready-made ones. Zedge, an application for creating ringtones for Windows Phone, will help with this. If it is not already installed on your smartphone, you can find it in the application store for mobile devices and install it on your mobile device.

There are simple instructions that will tell you how to install a ringtone on Windows Phone 10 using Zedge step by step:

How to change ringtone on windows phone using the created melody

If you don’t like the finished composition, you can learn how to change the ringtone on a Windows phone using a track created on a computer from the following instructions:

Of course, you can use a special program to trim tracks, but the quality of such a melody will most likely be low. And using the method described above, the owner of the gadget will receive a high-quality unique track that he can install on incoming call. If necessary, it can be replaced using the same instructions.

Very often, while using a smartphone, the user has questions about this device. And it is the mobile operating system Windows system 10 Mobile seems to be one of the most difficult. Everything that can be done in two taps in Android or iOS is not so simple here. Today we will talk about how to change the ringtone in Windows 10 Mobile.

The instructions are suitable for smartphones:

• Nokia 630 Lumiya;
• Nokia 520;
• and others.

Changing the ringtone in different ways

In order to set your ringtone in WM 10, there are two ways at once. We can change the settings manually or using a utility called: Ringtone Maker. So, let's start looking at the process. For clarity, each step will be accompanied by a screenshot.

Select in settings

Just like in other mobile operating systems, we can set the call to a signal that is included in the standard kit or downloaded by us. Both options are described below.

Set it to standard

In order to set a standard ringtone for a call, do the following:

1. First, go to the smartphone settings. Then click on the item.

1. The next step is to go to the section.

1. If we click on the field indicated in the screenshot below, we can listen to all the ringtones that are already in our smartphone. There are a lot of them here, almost 60 of them. Microsoft did a good job; when we scrolled through the list, we found a lot of quite interesting compositions.

1. All we have to do is select the song we like from the list.

That's all. We have set the standard call type.

Setting up your track

Well, we figured out how to install default tracks. But not everyone is happy with this; sooner or later the user will want to install a third-party composition. It’s exactly how this is done that we’ll talk about next.

Before you begin, connect your smartphone to your computer. To do this, you need to download and install drivers depending on your phone.

1. Connect your Windows 10 Mobile device to your PC.
2. Let's go to the smartphone settings, namely along the path: Settings - -. Then open the smartphone memory on your PC or laptop and go to the Mobile - Phone - Ringtones directory.

Important! Use exactly internal memory device, not its removable storage.

1. Move the WMA or MP3 file to this directory. Then disconnect the device from the computer and go to Settings again - -. Now the song that you added to the Ringtones folder will appear here.

You can set the ringtone without using a computer. Just download it online directly to your phone in the specified directory.

That's all. Now you know how to install your song in Windows Mobile 10. We move on to the next method.

Using Ringtone Maker

To change the melody you can use special program, available in the Microsoft Store. Let's figure out how to do this.

1. Go to the Microsoft brand store or download the program from the link. Then launch the application.

1. Select the song you want to set as ringtone (Ringtone Maker “sees” all the songs on your smartphone).