Asus laptops factory reset. Restoring factory settings via the control panel

If a smartphone or tablet running Android starts to work incorrectly or is locked, the user can go to the Recovery menu and reset the gadget to factory settings, thus restoring its functionality. What about Windows laptops, is it possible to bring them back to life in a similar way? In principle, yes, but for this there must be a special partition on the laptop’s hard drive. What this section is and what advantages its presence on the computer provides will be discussed below, but for now let me say a few words about restoring factory settings on the laptop itself.

What does it mean to restore factory settings on a laptop?

Resetting a laptop to factory settings is a fully automatic reinstallation of Windows with all system applications and drivers provided by the manufacturer. During the reset process, the system logical partition is formatted, all user data and settings on it are deleted, and then Windows deployment from a backup located on a special hidden Recovery section or HDD Recovery.

Once the reset is complete, you will receive the laptop in the same condition it was in at the time of purchase. An exception is made only for drive D - the data on it is not deleted during the recovery process. You will also not need to re-enter your activation code. Windows key. It is important, however, to note that resetting a laptop to factory settings only affects the software part; this procedure does not solve hardware problems.

When a factory reset may be necessary

Returning to factory settings will be relevant in case of serious malfunctions in the operation of the operating system, in case of frequent critical failures caused by problems and errors in the software, Windows infection viruses, as well as its blocking. Reset can also be used as an alternative to manual reset for other reasons.

In what cases is reset not possible?

If you purchase a laptop without an operating system, you should not expect that there will be a recovery partition on its disk. It is not possible to restore factory settings on such a laptop; in such cases, other methods are used to reset the system to its original state.

It will be impossible to roll back to the original settings even when there was a recovery partition, but during a manual reinstallation Windows master or the user himself deleted it, wanting to get more on the hard drive free space. The solution in this case may again be to reinstall or search for an image of the system partition for a given laptop model on torrents or the manufacturer’s official website.

Sequence of restoring factory settings on laptops

The sequence of actions when resetting a laptop computer to its original settings may differ from model to model, but, as a rule, these differences are insignificant. As an example, we will show how to restore factory settings for Asus, Acer, HP, Samsung, Lenovo and Toshiba laptops.

For Asus

To load the built-in recovery mechanism on Asus laptops, the F9 key is provided, which you need to hold down when you turn on the laptop, but before that you need to make sure that you have disabled the function fast loading. You can deactivate it (if the PC does not boot) in the BIOS on the Boot tab (Boot Master option).

In the recovery environment, select , agree to delete personal files and click “Next”.

Then click Only the drive on which the system is installed – Just delete my files – Restore to original state.

After this, the recovery procedure will be launched, upon completion of which you will be asked to re-create your account and set up your computer.

For Acer

The factory reset procedure for Acer laptops is slightly different. If the system boots, you can reset the settings using the proprietary utility Acer Recovery Management, launched through the Start menu (all applications). In the utility window, you need to select the “Restore factory settings” option, after which the recovery environment will be loaded, in which you need to repeat all the steps described in the previous paragraph (for Asus laptops).

If Windows does not boot, use a key combination to enter the recovery environment Alt+F10, having first made sure that the option is enabled in the BIOS on the Main tab D2D Recovery. If it is disabled, be sure to enable it, otherwise Alt + F10 will not work.

Otherwise, we proceed according to the first scenario: select on the screen Diagnostics – Return to original state and so on.

For HP

Like Acer, HP brand laptops come with a built-in proprietary utility HP Recovery Manager, which can be launched either through the Start menu or by pressing the F11 button when turning on the device. Resetting a laptop to factory settings with its help is not difficult. If the computer does not boot, press F11 when turning it on and select actions from the standard menu .

In the next window, enable the option “Recover without creating a backup copy of files” and click “Next” as many times as the wizard asks.

After a short preparation, the reset process itself will begin, after which all you have to do is set up your computer. If the operating system is still able to boot on its own, launch HP Recovery Manager through the interface, select “Environment Windows recovery" After reboot, select Diagnostics – Recovery Manager and repeat the steps described above until setting up your account.

For Samsung

Samsung laptops also have their own system recovery utility. It is called Samsung Recovery Solution and is called by pressing the F4 button when turning on the computer. The recovery procedure in it is not too complicated, the only thing you need to do before starting it is to copy the files that are important to you to a removable hard drive or other portable media, since there is a high probability that during the process of returning factory settings, the partitions created by the user will be deleted with everything their contents.

So, press F4 when loading, accept in the utility’s welcome window license agreement, we refuse the offer to create backup copy system and click “Recovery” in the initial window.

At this point you will be prompted to set additional parameters. In principle, you can skip this step, but it will be better if you follow these rules:

1. You need to select the earliest restore point.
2. It is better to disable deleting data from additional partitions, although it is not certain that this will help.
3. Enable the “Save user data” option.

Having prepared in this way, click “Restore”, confirm the action and wait for the procedure to complete.

Procedure in fifth Samsung versions Recovery Solution slightly different. Here we also press F4, in the utility window we select Recovery – Full recovery.

For Lenovo

Next on our list are Lenovo laptops. Let's see how to reset a laptop of this brand to factory settings. There is nothing complicated here either, since Lenovo uses its own proprietary utility to reset OneKey Rescue System. Unlike previous models, entering the recovery environment is carried out not using the standard top row keys, but using special button"Novo Button", located next to the laptop power button.

With the laptop turned off, press this very button and use the arrow keys to select the System Recovery option.

In the utility window that opens, click sequentially Restore from original backup – Next – Start and confirm the action by clicking the “Yes” button.

The factory reset procedure will begin, and you will be notified of its completion by a corresponding message.

For Toshiba

In the case of Toshiba laptops, everything is very similar, but there are also some nuances here. Restoring to original settings is done using proprietary software Toshiba HDD Recovery or Toshiba Recovery Wizard(in older models). To go to the utility interface on new Toshiba models, you need to hold down the 0 key and then turn on the laptop. When the beep sounds, the 0 key must be released. Then everything is simple, you just need to follow the instructions of the wizard.

Older models use the traditional F8 key to load the recovery tool, which opens a menu of additional boot options. In this menu you need to select Troubleshooting your computer - Toshiba Recovery Wizard. After reading the warnings, click sequentially Restoring the factory default software – Restore to the state at the time of purchase – Next.

After this, the procedure itself will begin, upon completion of which you will be asked to restart the computer and reconfigure the system.

Instead of a total

The recommendations given in this article are of a general nature; the details of the process of reverting a laptop to factory settings are detailed. Windows settings 7/10 may vary. Differences may be in the interface proprietary utilities different versions, it is also possible that in some laptop model the recovery environment boot key will be different. For example, the “Novo Button” button in Lenovo may be located in a different location, and so on. All this is generally unimportant, the main thing is that there is an HDD Recovery partition on the hard drive and that the factory backup files are not damaged. Otherwise, to restore Windows functionality, you will need at least installation disk With operating system.

How to restore a laptop to factory settings?

It is often necessary to perform a factory reset on a laptop because the operating system begins to malfunction. You can reset your computer to factory settings yourself. This process takes place in several stages and depends on the laptop model. Below we offer several instructions for specific laptop models.

Factory reset on Asus

To return the laptop Asus factory settings, you must perform the following steps sequentially:

1. Disable fast boot (Boot Booster) in BIOS. To do this, press the laptop's power button and immediately after booting starts, hold down the F2 key. After this, you will be redirected to the BIOS settings, there you will need to select the “Boot” tab, then click on “Boot Booster”, then press Enter and select “Disabled” with the arrows. You will now be moved to another section. In it you need to click on the “Save changes and exit” command and wait for it to activate.
2. Turn on the laptop again, and then press the F9 key. After this, system preparation for data recovery will begin.
3. A message will appear on the screen indicating that all user settings will be deleted. You will need to confirm this action by clicking OK. After this, all the necessary processes will take place in automatic mode, you just have to wait for their complete completion.

Reset settings on Acer

To reset your Acer laptop, you will need to do the following:

1. Turn on your computer, then start holding down the Alt key and continuously press the F10 button.
2. The operating system will ask you to enter a password. By default it is: 000000
3. A menu will appear on the screen, select Factory reset, after which the factory settings will be restored.

Factory reset on HP

To restore your HP laptop to factory settings, you need to do the following:

1. Turn on your portable device and press and hold the F11 key.
2. The screen will appear software Recovery Manager, with which you can restore factory settings.
3. In its main menu, select System Recovery, then the system will reset user settings automatically.

Reset settings on Toshiba

To restore factory settings on a Toshiba laptop, you will need to follow these steps:

1. Turn on your computer, and then press and hold the 0 key on your keyboard for 30 to 45 seconds.
2. When the device starts beeping, you need to release the 0 button and wait until the operating system automatically resets the user settings.

Reset settings on Sony

Restoring a Sony laptop to factory settings is quite simple. You need to follow these steps:

1. Turn on your laptop and press and hold the F10 key.
2. A message will appear on the screen stating that a Factory reset will begin, you will need to click on “OK” and wait for the system to complete the specified operation (its duration is no more than 5 minutes).

Factory reset on Samsung

You need to reset settings on a Samsung laptop using special utility. She is always present in the operating room Windows system and is called Samsung Recovery Solution. To launch it and reset the settings, you need to do the following:

1. When turning on the laptop, press the F4 key and hold it for a few seconds.
2. After this, the system utility will start; in its main menu, select Restore.
3. In the tab that opens, click Complete Restore, and then select the item called Computer Initial Status.
4. A message will appear on the screen indicating that the operation to restore factory settings has begun, click on “OK” to confirm this action, and wait until the system is completely shut down.

When the laptop starts to slow down terribly due to a bunch of installed and incorrectly removed programs, system garbage, a lot of temporary files and other unpleasant things, the most logical solution is to roll back the system to its original state. In this article we will figure out how to return a laptop to factory settings, using the example of all major manufacturers.

Many users will argue that it is easier to reinstall Windows. But it has the same consequences as reinstallation, but it is done many times faster and does not require boot disk. In addition, users are freed from the need to search and install drivers - after returning to the original state, they only need to reinstall.

Each laptop manufacturer equips its devices with branded ones. However, working with them follows the same scheme and requires compliance with a number of rules:

• During a system rollback, the adapter must be inserted into the laptop so that the power is not interrupted. Interrupting the rollback procedure is fraught with more serious problems than just .
• All important data from hard drive It’s better to first transfer them to - after successful recovery you will return them back.
• In some utilities you can only restore system partition(drive C:) or all. It is recommended to perform a full recovery (this will delete all data from the hard drive, so move it to another location - see point 2).

So, if you want to get the system in the same condition as when you bought the laptop (without brakes, freezes, unnecessary programs and files), then select a laptop from your manufacturer and follow the steps described.

Asus

Let's start with one of the most famous laptop manufacturers - Asus.

Returning an Asus laptop to factory settings:

You don’t need to press or enter anything else - the recovery utility will figure out how to return your ASUS laptop to factory settings.

By the way, pressing the F 9 key when turning it on for the first time will not lead to anything, since by default the “Boot Booster” function is activated in ASUS laptops. It needs to be disabled in Bios. To do this, in the “Boot” item, move the parameter value to the “Disabled” position.

Acer

Let's continue our study of the topic with a story about how to return an Acer laptop to factory settings. You can perform this procedure from a running Windows (the utility is called "Acer Recovery Management") or through recovery tools.

Let's look at the second option:

On Windows 8.1, the recovery utility interface changes. Here you will have to select the item in the “Diagnostics” section "Return to original state". The rollback procedure is not much different, and all the steps are described in detail in Russian, so you will quickly figure out how to return an Acer laptop to factory settings.

Lenovo

To understand how to return a Lenovo laptop to factory settings, you first need to find a small “OneKey Rescue” button on the laptop case, which is responsible for launching the recovery utility.

Then follow these steps:

Wait until the rollback procedure is completed and be sure to restart your computer for the new configuration to take effect. The answer to the question of how to return Lenovo laptop to factory settings, received, but there are other manufacturers, so we move on.

Samsung

It’s the turn of the South Korean manufacturer to answer the question of how to return a Samsung laptop to factory settings.

Resetting a Samsung laptop to factory settings:

You figured out how to return a Samsung laptop to factory settings, so you can forget about the need to reinstall the system.

HP

It's the turn of the next manufacturer: let's see how to return an HP laptop to factory settings.

Resetting your HP laptop to factory settings:

Now you know how to reset your HP laptop to factory settings. All that's left to do is wait until the factory reset procedure is completed, and start working with the laptop again.

MSI

Wondering how to reset an MSI laptop to factory settings?

Nothing complicated here either:

That's all you need to know about how to factory reset an MSI laptop.

Toshiba

Now let's figure out how to return a Toshiba laptop to factory settings. In the latest models, launching the recovery utility is quite simple.

Returning a Toshiba laptop to factory settings:

1. Turn off your laptop.
2. Press the number "0" and hold the key.
3. Without releasing the key, turn on the laptop.
4. When the computer starts beeping, release "0".

A program to restore settings to factory state will appear on the screen - you need to follow all the instructions of the recovery wizard.

But how to return a Toshiba laptop to factory settings if you have old model? Here you will have to use the “Troubleshooting” section, which can be selected in the menu of additional boot options (F 8 key when turning on the computer).

After a short wait you will see the system again in original factory condition.

Dell

If you are looking for how to reset your Dell laptop to factory settings, you can follow the instructions above (via Troubleshooting).

Let's look at the features of the built-in recovery program:

The recovery program is completely Russified, so you can easily figure out what to do. Following the above step by step instructions, you will probably positively resolve the question of how to return a Dell laptop to factory settings.

In this article, we examined the topic of restoring a laptop to factory settings from all the most famous laptop manufacturers.

Restoring a laptop to factory settings is a safe alternative to the usual reinstalling Windows for inexperienced users. Rollback allows you to eliminate critical errors interfering with the normal operation of the system. Unlike a regular reinstallation, after resetting your laptop to factory settings, you will not have to look for hardware drivers. The only thing you need to do is reinstall the programs that were removed during the rollback.

Recovery rules

The built-in program that allows you to restore the laptop to factory settings is located on a hidden partition of the hard drive. Therefore, if you or a technician called to your home reinstalled Windows, completely formatting the hard drive, then you will not be able to roll back the laptop to its original state.

If you, due to your ignorance, encounter such a problem, then there are few options for eliminating it:

• Buy a recovery disk image or download it on torrents (which can also be dangerous).
• Produce clean Windows installation with entering the activation key.

If you haven't formatted HDD, then there will be no problems with resetting the settings. But if you decide to return the laptop to its original state, then you need to know the consequences of this operation:

1. All user data will be deleted.
2. The partition on which the system is installed will be formatted. Windows will be reinstalled; you will not need to enter an activation key.
3. System programs and drivers will be installed automatically upon first launch.

Typically, files stored on partition D remain untouched. But to prevent the loss of user data when trying to restore factory settings, you need to make a backup copy of it.

If the system is still starting, then the easiest way to save information is to reset it to external storage. If errors prevent you from loading into Windows environment, then you can make a backup using a Live CD: install the AOMEI PE Builder 1.4 FREE program on a flash drive, boot from it and transfer the data to removable media.

Important! When resetting, the laptop must be plugged in and fully charged. An emergency shutdown can lead to dire consequences, which will require a clean installation of Windows to resolve.

Acer

An Acer recovery program that allows you to reset your settings to the original settings can be run in Windows - it is called Acer Recovery Management. But if Windows already does not load, then this is not a problem:

Once the reset is complete, click Finish and restart your computer. When you start it for the first time, you will have to configure the system again: accept the license terms, enter the computer name, create account.

Sony

To get to the Sony Recovery Center, press the F10 key when turning on the laptop. In the menu that appears, select launch the appropriate tool.

The program provides two options:

First, you can try to return the system to its original state by restoring drive C. If such a reset does not solve the problem, then perform a full restore by deleting all partitions.

HP

To run the reset program, press the F11 key when turning on your HP laptop. Then go to the Diagnostics section and launch the Recovery Manager tool.

After resetting the settings, re-specify your system settings and create an account to start working with clean Windows.

Making a reset on a laptop (for example, Samsung) means returning the factory settings.

This is usually done when there are performance problems, viruses, etc.

A recovery disc can be your friend here, but many laptops don't come with one when sold.

It doesn’t matter - exactly the same disk is in the hidden partition. Just take into account that everything described here applies to laptops purchased with the Windows operating system pre-installed.

If this is not your case, just don’t worry, it describes how to do a reset when installing the operating system yourself.

How to reset a laptop without a recovery disk

The first step is to back up all the data you want to keep before performing a reset, including documents, photos, music and videos.

Returning to factory settings (reset) will remove all this along with all the programs that you installed after you received your laptop.

Acer - Alt + F10
Asus - F9
Dell/Alienware - F8
HP - F11
Lenovo - F11
MSI - F3
Samsung - F4
Sony - F10
Toshiba - 0 (not numeric keypad) during power on when Toshiba logo appears

If these keys do not work, pay attention to messages on the screen during startup that may indicate how to begin the recovery process.

Sometimes you may need to check whether your recovery partition (reset) is enabled in the BIOS.

Next, you should see instructions on the screen explaining how to proceed.

Different manufacturers use different software to restore the "disk image" from the recovery partition.

This process is almost always automatic, once you have confirmed that you want to continue, you can rest for 30 minutes - just wait for the message that the reset is complete. Good luck.