D link 320 connection. The old horse doesn't spoil the furrow

At home or in a small office. Moreover, with its help you can implement both wireless connection of devices and using twisted pair. In the latter case, a limitation is imposed: there are only 4 ports, which is exactly how many devices can be connected.

Equipment

The following equipment boasts D-Link DIR-320:

user manual;

• power supply with non-removable cord and plug;

  meter twisted pair, crimped at both ends with appropriate lugs;

  disk with drivers and an electronic version of the documentation for the router.

Appearance and purpose of connection elements, indication and control

An information panel is displayed on the front of the device, which consists of the following LED indicators:

Power: Lights up continuously during operation and indicates that the device is plugged in.

Status: When the router is operating normally, it blinks continuously. If it lights up continuously, an error has occurred and the device must be restarted.

Internet: may simply light continuously (if there is a connection, but no data is being exchanged) or blink (if there is a connection and information is being transferred).

The next 4 ports are wired. When connected, they light up continuously and blink when data is being exchanged. If the port is not used during operation, then the corresponding indicator is disabled.

The last LED indicator is associated with the printer. It simply lights up continuously when a printing device is connected, and blinks while the document is being output.

The following communication and control elements are located on the back of the device:

antenna wireless connection;

USB port for connecting a printer;

4 LAN ports for creating a wired part of the LAN;

input port for connecting twisted pair cable from the provider;

power supply connection socket;

Reset button to reboot the router.

Selecting a location for installing a network device

At the first stage, we choose the right place for installation. And here, not everything is as simple as it seems at first glance. On the one hand, all wires must be suitable for the installation site of the router, and there must be an outlet nearby for power supply. On the other hand, it is most correct to place the router in the center of the room: this will ensure excellent speed of transmission and reception of information, high level Wi-Fi signal. The router should also not be placed near metal sheets, which can dampen the wireless network signal. Based on the recommendations given earlier, you need to choose the location of the router.

D-Link DIR-320 sequence

The order of this network device model is as follows:

We assemble a temporary circuit for initial setup;

turn on the device and configure it properly;

we analyze the temporary scheme;

install the router in a permanent place;

We assemble a permanent local area network diagram;

turn on the router;

testing the correct settings in the wired network segment;

We check the functionality of the Wi-Fi wireless network.

The router can also be configured at a permanent location, provided that the computer is constantly connected to it by wire. Since this condition cannot always be met, it is recommended to do the setup in 2 stages.

Temporary connection for configuration

Next step of setup D-Link router DIR-320 is a collection of temporary circuitry for configuring a network device. To do this, install it next to a PC or laptop. We use the complete crimped one to connect the computer and the router. We install one end of it into the port network card PC, and the second in any of the 4-wire ports of the router (but not the one intended for exchanging data with the provider’s equipment). We install the power supply into any nearest free outlet, and the cord from it into the power socket of the router. The temporary diagram is ready.

Set the parameters

Now you need to set software settings D-Link DIR-320. To do this we do the following:

turn on the connected computer and router;

wait for the computer and network device to finish loading;

launch any of the browsers available on the PC;

in the address bar of the browser, type the combination of numbers 192.168.000.001 (this is the network address of our router) and press Enter;

in response, a request will appear with a login and, of course, a password. In the first field, enter admin. The second field is left blank when starting for the first time. If this is not the first launch, then enter the password in the second field, which was previously specified;

in the router configuration interface that opens, select “Connection Wizard”;

then we ask New Password administrator and confirm it if necessary;

at the next stage you need to set the connection settings to network equipment provider. This data is provided by the Internet service provider and is usually specified in the contract. This includes the connection type (for example, PPPoE or L2TP), login and password to establish the connection (if required), static or dynamic network address;

After making all the necessary settings, click the Connect button. The router will then reboot;

after rebooting the router, go to the setup menu using the previously described method and select the “Wireless Network Setup Wizard” item;

then set the name of the wireless network at your discretion;

The next step is to set the wireless network password. Again, at your own discretion;

save the changes and force reboot the router.

The preliminary setup is completed, you can turn off the computer and network device and disassemble the temporary circuit.



We install the router in a permanent place and connect

Now we install the D-Link DIR-320 router in a permanent place that most optimally meets the previously stated conditions. We bring all wired communications here: twisted pair cable from the provider and other devices that connect to the LAN in this way. We connect the incoming wire from the Internet service provider to the “Internet” port. In the remaining 4 ports we connect the equipment that will use a wired connection. We install the power supply into the outlet, its cord to the router socket. After completely collecting the permanent circuit and checking the correct connections, turn on the router.

Checking the wired LAN segment

After the D-Link DIR-320 NRU router boots up, you can test the wired part of the LAN. To do this, on any computer connected to the router using twisted pair, go to the network settings (Start\Control Panel\Network Connections). Next, create a new connection and save it. We close all windows. Launch any browser and enter any Internet address and press Enter. After this it should open start page. If this does not happen, check the settings that must be configured to automatically obtain a network address.



Testing the wireless part of the local area network

Next you need to check the functionality of the wireless WiFi connections. The D-Link DIR-320 router allows you to transfer information at speeds of up to 54 Mbit/s. The connection order in this case is as follows:

The router must be turned on and in operating mode, and not in the boot phase.

On any mobile device activate the Wi-Fi transmitter.

Go to the “Settings” of the device, select WLAN and click on the “Search” button. Upon completion, a complete list of all available wireless LANs will appear.

We select exactly the network whose name was specified at the setup stage and connect to it. When prompted for a password appears, enter it. At the same time, it is important not to confuse the administrator password for the D-Link DIR-320 and the password for gaining access to the wireless network. It is the second one that needs to be entered, and they must be different.

Subsequently, the color of the Wi-Fi indicator should change: two triangles should appear on it.



Summary

After setting up the D-Link DIR-320 router, this network device will serve you for many years. This operation, as a rule, has to be performed only when starting up the equipment for the first time. In the future, it functions with the specified values, and there should not be any problems with it.

In order to get to the router’s web interface, you need to open your Internet browser and type 192. 168.0.1 in the address bar, Username - admin , Password - admin(provided that the router has factory settings and its IP has not changed).

Changing the factory password

Default: Login admin, password admin.

In the router interface, you need to go to the tab System, menu Administrator password.

In field Password (New Password) Enter a new password.

In field Confirm Password repeat new password.

After this, the router will prompt you to re-enter its settings.

Setting up an Internet connection

On the page Advanced settings; select Net; ⇒WAN;.

Click on the button Add.

Setting up a PPPoE connection

1. In field Connection type: select PPPoE
2. In field Port select the WAN port - it is listed there as Port 5.
3. Username: Your login from the contract
4. Password: Your password from the agreement
5. Password confirmation: repeat password
6. Authentication algorithm: Auto
7. Keep alive
8. MTU

In field Miscellaneous NAT And Firewall.

Enable IGMP.

Setting up an L2TP connection

1. In field Connection type: select L2TP + Dynamic IP
2. In the Port field, select the WAN port - it is listed there as Port 5.
3. Username: Your login from the contract
4. Password: Your password from the agreement
5. Password confirmation: repeat password
6. VPN server address: enter the address of the provider's VPN server
7. Authentication algorithm: Auto
8. Keep alive- check the box for permanent connection
9. MTU- change the value to 1450 or less

In field Miscellaneous check that the checkboxes are checked NAT And Firewall.

If your provider provides Internet television service, check the box Enable IGMP.

Configuring PPtP (VPN) while automatically obtaining a local IP address (DHCP)

1. In field Connection Type: select PPTP+ Dynamic IP
2. In field Name enter the name of the connection (you don’t have to change it)
3. Username: Your login from the contract
4. Password: Your password from the agreement
5. Password confirmation: repeat password
6. Connect automatically: put a tick
7. MTU change the value to 1450 or less
8. Authentication algorithm: Auto
9. Keep alive- check the box for permanent connection
10. Save the settings with the button and reboot the router.

Setting up Wi-Fi on the router

1. From the advanced settings page, go to the tab WiFi, select the item basic settings; and set the desired name of the wireless access point SSID. After that, click Change;.

2. After this, it is also recommended to set a password for your wireless network. To do this, go to settings Wi-Fi security, select the authorization type (WPA2/PSK recommended), and then enter any password of at least 8 characters - this will help protect your wireless network from unauthorized access. Save your changes.

That's all: now you can try using the Internet wirelessly Wi-Fi connection from a laptop, tablet or any other equipment.

Checking Internet connection status

If the connection is created correctly and there are no problems on the part of the provider, then in the column " Network information", WAN connection status it will say connected and your IP address.

Saving/restoring router settings

1. Select saving the current configuration. To save the current settings of the router, the settings file will be saved to the specified location on the hard drive.
2. To restore settings from a file, you need to click and select Loading a previously saved configuration into the device, specify the path to the settings file, then click the button.

If you purchased new router or moved to a new place of residence with old equipment, then most likely you will need to configure the d link dir 300 Rostelecom router. This process is not as complicated as it seems at first glance. In this article we will prove this and consider all the stages of this procedure, as well as setting up the d link dir 320 Rostelecom router.

• Preparing the router


• Setting up a router dir 300 Rostelecom - old firmware


• New firmware and work with the dir 320 model


• Enabling WiFi protection


• Conclusion

cost of Interactive TV from Rostelecom.

How to connect Interactive television via a router, you can read here.

After successfully logging into the main interface, the router will most likely prompt you to change the standard password to your own. We enter the invented combination of characters in two fields, confirm and go through authorization again, but with new data. If everything is done correctly, you will see the main menu in the form of blue “buttons” of a fairly large size.

To start setting up the network, perform the following operations:

• click on the first (lower left) button of the second line “Configure manually”;


• In the top text menu, select “Network”;


• open an existing “WAN” connection;


• Scroll down the page and click “Delete” in the lower right corner;


• wait until the page refreshes, the “Add” button appears on the right, click on it;


• on the settings page that opens, specify the type of Internet connection – PPPoE;
  we do not touch the port;


• choose any name (this is what your connection will be called in “ Network connections" on the computer);


• Below we indicate the login from the agreement with Rostelecom, as well as the password;


• save the changes made, then click “Save” again in the center of the page.

At this stage, we put aside the Rostelecom agreement and check the settings of the dir 300 router - go to any page on the Internet. It should open without problems. All that remains is to configure the wireless network. For this:

• open the WiFi menu item (located next to “Network”);


• in the SSID field, enter any name for your network and move on;
  to set the password, save the changes and select from the available WPA2-PSK options;


• Enter the password you created and save again.

That's all, the connection and wireless network are ready to go.

How to disable the Gudok service.

About transferring subscribers mobile operator Rostelecom on Tele-2 can be read here.

From this article you learned how to set up a dir 320 router for Rostelecom, as well as its previous model, and these instructions should work in most cases. If you have such a typical problem as the web interface being unavailable via IP (that is, the browser does not open the authorization page after entering the combination 192.168.0.1), then again go to the Internet protocol properties (where we set automatic IP/DNS acquisition) and switch network for working with static data. In the fields that become active, indicate:

• 168.0.12;


• leave unchanged (should fill in automatically);


• 168.0.1;


• DNS data from the contract;


• also stated in the contract.

After applying these changes, the login page should become available. If you still have questions, watch this video:

And that's all. Tell us about your experience connecting to the Internet. Any questions in the comments are welcome!

You can connect the DIR-320 router to the Internet using an external modem or a regular Internet cable provided by your provider. All parameters are specified in the web interface; setting up the router does not require installing a separate application. D-Link devices have a large number of settings to achieve optimal performance home network.

Connecting the DIR-320 router and logging into the web interface

You can configure the router with a wired or Wi-Fi connection. Insert into the router the Internet cable that was installed into the premises by your provider. To do this, use the last port, indicated in gray. Connect your home computers using the LAN ports highlighted in blue on the back panel.

Insert the power supply plug into the “5V-2A” connector. If the Internet is connected via an external 2G/3G modem, insert it into the “USB” connector. Plug the DIR-320 into a power outlet only after connecting all cables and external devices. Otherwise, the router may malfunction or be damaged.

Connect the network on the computer from which you will change the parameters of the D-Link DIR-320 router. At using Wi-Fi select "D-Link" from the list of wireless connections. By default, there is no encryption, so you can complete the operation without entering a password. If you are using a cable connection, insert the plug into the Ethernet port of your computer or laptop.

On your chosen device, open a web browser, such as Google Chrome. In the address bar of the program, enter the IP through which you will access the settings of the DIR-320 router. The address in the router's standard firmware is: 192.168.0.1. On the page that opens, you will need to enter data to access the control panel. Standard login and password: “admin”. Fill out the text fields and click “Login.”

Note! If the account on the D-Link DIR-320 was changed earlier, reset the router settings. To do this, press and hold the “Reset” button on the rear panel for 10 seconds. When the factory settings are restored, log in again using the default data.

If you enter your account information correctly, you will be redirected to the statistics page. Among other data, it displays the total number random access memory on the DIR-320 router and the amount of available memory. Below is the time since the D-Link router was last turned on.

Internet connection via 2G/3G modem

To establish a connection through an external device, go to the “Internet Settings” menu and in the first field, check the “USB Adapter” value. Select your carrier name from the following drop-down list. If the system does not have data for your 2G or 3G provider, set the value to " " and write the operator's name in the next text field.

In the “Username” and “Password” sections, enter the information provided by your provider. If necessary, enter the dial-up number in the appropriate field and the name of the access point in the “APN” line. You can find out the necessary information in technical support or on the official website of the Internet provider. It is recommended to leave the remaining points unchanged.

Open the “USB modem -> Information” section. In the first list, indicate the type of modem depending on the generation used wireless communication. Allow access to mobile Internet in the second drop-down list. The remaining rows of the table will contain information about the connected device. Click the "Connect" button in the lower right corner of the page.

Important! If the modem is not recognized, unplug it, then plug it back into the USB port and click the "Update" button below the table.

Some operators require you to enter a PIN code to connect to the mobile Internet. You can specify this information in the same menu, through the “PIN” section. Enter current digital password provided by the operator, in the “PIN code” field. To prevent the system from prompting you for a code each time you connect, check the box and click “Apply.”

Cable connection of DIR-320 to the Internet

Open the Network menu and go to the tab P-t-p interfaces" By default, their list will be empty. To create new interface for D-Link, click the "Add" link in the connection table. In this section, you can create a network connection using the L2TP, PPTP and PPPoE protocols.

Select the connection type from the first list. It can be specified in the agreement concluded with the Internet provider. The data is also indicated there account, if they are required to establish a connection. If there is no contract, you can clarify the data by calling or writing to the support of the company that provides Internet connection services. Fill in the required fields and click “Edit”.

Connecting with a static IP is done in a similar way. When you select “Static” in the “Interface Type” section, new text fields appear: IP address, network mask, MAC address. All this data is also provided by the provider.

The “Status -> Network Statistics” section contains information about the operation of different interfaces, including:

• Assigned addresses;
• Reception and return speed;
• Number of received and sent packets;
• Dropped packets;
• Packets received with errors.

Setting network parameters

You can manage running interfaces in the “Network -> Network interfaces" The current connection status is displayed next to each entry. Each of them can be temporarily stopped or disabled. Available interfaces include connected LAN devices (laptops, computers and other home network devices), Wi-Fi and WiMAX wireless technologies.

To add DNS servers, go to the “Name Servers” section. The default “Configuration method” field is set to automatically receive values ​​from the Internet provider. Selecting “Manual” will allow you to specify other DNS servers. You will be able to enter their IP addresses in the second text box. To save addresses, click “Edit”.

Assignment of IP addresses within local network performed by the DHCP server. Open the “DHCP Settings” tab to change its operating mode. In the “Static DHCP” table you can bind permanent addresses for individual devices. The match is determined by the MAC address.

You can find out the MAC address of the device for further binding in its settings. For computers under operating system control Windows systems MAC determination is made in command line. To do this, use the command: “ipconfig /all”.

The settings of the current server can be changed by clicking on its name. The most important parameters in this table are the start and end addresses of the range. The system will automatically assign IP addresses from this numerical range to new clients. If you need to change it, make sure that the new values ​​are within the range allocated for local networks.

Training video: Step-by-step setup of D-link DIR-320 for dummies

Wi-Fi setup

Open the “Network -> Wireless Connection” tab. The first checkbox is responsible for Wi-Fi work module. If you remove it, the router's wireless broadcasting will be stopped. Other options:

• Hide access point—makes the network invisible in the general list.
• SSID is the Wi-Fi name that will be displayed when searching for networks.
• Country—allows you to select the territory in which the device is used. The parameter affects the list of allowed channels.
• Channel—band number within the Wi-Fi frequency. Standard value: 6.
• To select the encryption type and specify the Wi-Fi access key, click “Security Settings.”

In the first list, select the network authentication method. By default, the connection to D-Link is unencrypted and no password is required to connect to Wi-Fi. It is recommended not to leave the value "Open" to avoid interception network traffic. Select a different authentication type and set a PSK key (the password that will be used for Wi-Fi).

Important video: D LINK dir 320 router settings

Changing router system parameters

On the “System” tab, you can reboot the D-Link router or go to any subsection. If a reboot is performed by clicking a button in the Actions table, the changes made in the previous steps will not be applied. To save them, use another button: “Save and reload”. It is located in the upper right corner.

The “Administrator Password” section allows you to change the standard account information. To do this, select the “admin” user and check the “Change system password” checkbox. Enter the new password and its confirmation in the next two text fields. To ensure the best protection for your home network, use complex passwords containing Special symbols, numbers, small and large letters.

When all the necessary settings Wi-Fi router D-Link DIR-320 will be changed, it is recommended to save the configuration to a file. Go to the menu item “System -> Configuration”, click “ Backup copy" and select the directory in which the backup will be written. If the router malfunctions or another user accidentally restores the factory configuration, you can return the settings from the saved file.

Advice! To restore factory settings, use the corresponding item in the same menu.

D-Link recommends regular updates software router. Each new firmware contains not only expanded functionality, but also network security updates. Usage latest version The software will help protect the device from hacker attacks. Current version can be downloaded from the manufacturer’s website, in the “Support -> FTP” section.

The downloaded file is installed on the DIR-320 through the “System -> Software Update” menu. Click the “Browse” button and specify the path in the system where the new firmware is saved. Then click "Update" in the lower right corner. The update installation process will take several minutes. After automatic reboot router you can use new version software.

If you purchased a new router or moved to a new place of residence with old equipment, then most likely you will need to configure the d link dir 300 Rostelecom router. This process is not as complicated as it seems at first glance. In this article we will prove this and consider all the stages of this procedure, as well as setting up the d link dir 320 Rostelecom router.

Preparing the router for work

Before you start working directly, you need to inspect the device itself and perform a few simple operations:

• connect the power cord and make sure that the “Power” indicator is on;
• connect the Internet cord to the appropriate connector: there are 5 in total;
• Verify that the Port 1 and Operation LEDs on the front panel are lit. WiFi networks, indicating that the cable is connected correctly and the signal from the provider’s servers reaches the device.

Important: the first four connectors are designed to connect a computer and a router via cable. The fifth is for connecting the telephone wire (Internet), as a result of which d link 300 will take on the function of an ADSL modem.

Now we take out the documents that Rostelecom provided us; they are needed to configure the dir 300 router.

How to configure a dir 300 router with the old web interface

Setting up the d link dir 300 Rostelecom router begins with preliminary computer settings. They are carried out as follows:

• Press the code combination Win+R on the keyboard. The “Run” window will open;
• enter the combination ncpa.cpl into the empty field;
• in the network connections window that opens, select your current one (which you are setting up) and open its properties;
• from the list, select Internet Protocol version 4 and also go to properties;
• if any IP and DNS addresses are specified, switch the network to automatically receive data.

Next, open the browser and, just as when setting up the dir 320 router for Rostelecom, enter the combination: 192.168.0.1 into the address bar, which will take us to the authorization page. There is no need to know the login and password when setting up a new device (purchased and never used), since the value is the same for both fields - the word “admin” is strictly in lower case. If an error pops up indicating an incorrect password, it means that the router has already been configured before and you need to find out the new Password set or reset the value by pressing the Reset button.

After successfully logging into the main interface, the router will most likely prompt you to change the standard password to your own. We enter the invented combination of characters in two fields, confirm and go through authorization again, but with new data. If everything is done correctly, you will see the main menu in the form of blue “buttons” of a fairly large size.

To start setting up the network, perform the following operations:

• click on the first (lower left) button of the second line “Configure manually”;
• In the top text menu, select “Network”;
• open an existing “WAN” connection;
• Scroll down the page and click “Delete” in the lower right corner;
• wait until the page refreshes, the “Add” button appears on the right, click on it;
• on the settings page that opens, specify the type of Internet connection – PPPoE;
  we do not touch the port;
• choose any name (this will be the name of your connection in “Network Connections” on your computer);
• Below we indicate the login from the agreement with Rostelecom, as well as the password;
• save the changes made, then click “Save” again in the center of the page.

At this stage, we put aside the Rostelecom agreement and check the settings of the dir 300 router - go to any page on the Internet. It should open without problems. All that remains is to configure the wireless network. For this:

• open the WiFi menu item (located next to “Network”);
• in the SSID field, enter any name for your network and move on;
  to set the password, save the changes and select from the available WPA2-PSK options;
• Enter the password you created and save again.

That's all, the connection and wireless network are ready to go.

Setting up a router dir 320 Rostelecom

Since setting up the new firmware of the Dir 300 router and the main firmware of the 320 model are practically the same, we will provide general instructions for setting up a network on this type Rostelecom devices.

The initial setup of the d link dir 320 Rostelecom router is carried out in exactly the same way as described earlier:

• connect network cables and set automatic IP/DNS acquisition;
• after that, log in with standard data and set your own login password;
• in the interface window that opens, look in the lower right corner - “Advanced settings”;
• in the “Network” field, select the first submenu item – “WAN”;
• select an existing connection and, similarly, click “Delete”;
• add a new connection in the same way as in the previous paragraph, entering the network name and data from the contract, and then save it;
• open the notification that appears (light bulb in the top menu) and click “Save”;
• refresh the page and observe the connection status “Connected”.

This completes the setup of the router dir 320 Rostelecom via a wired connection. Check the functionality of the connection by going to any of the search engines or to the website social network. If everything is done correctly, the Internet will work.

Setting up a WiFi router d link dir 320 Rostelecom

To configure the d link dir 320 Rostelecom router to “distribute” a wireless connection, you need to return to the main menu and open the advanced settings again. Next to the “Network” field you can find the functionality we need wifi settings. Go to the “Basic Settings” submenu and specify, as in the previous firmware, the network name. Then we go back a step and open the security settings, where you need to set the same type of network authentication and the same long password (at least 8 characters) as on the d link dir 300 router. Save the changes twice (the second time in the notification above) and check WiFi network availability on any suitable device.

From this article you learned how to set up a dir 320 router for Rostelecom, as well as its previous model, and these instructions should work in most cases. If you have such a typical problem as the web interface being unavailable via IP (that is, the browser does not open the authorization page after entering the combination 192.168.0.1), then again go to the Internet protocol properties (where we set automatic IP/DNS acquisition) and switch network for working with static data. In the fields that become active, indicate:

• 168.0.12;
• leave unchanged (should fill in automatically);
• 168.0.1;
• DNS data from the contract;
• also stated in the contract.

After applying these changes, the login page should become available. If you still have questions, watch this video:

And that's all. Tell us about your experience connecting to the Internet. Any questions in the comments are welcome!