How to password protect Wi-Fi on a laptop. How to protect your home Wi-Fi network with a password

Hello everyone! Recently I was asked to tell you how to set a password on a wifi router, otherwise people are tired of giving away their Internet to their neighbors.

Of course, Wi-Fi has become a very popular wireless network, which is especially attractive for users of tablets, smartphones, and laptops. But often regular PCs also connect to a Wi-Fi network. This technology is also good because there will be no stupid wires in the apartment or office that spoil the surrounding view, as well as the design. However, do not forget about the security of such a network. When users install a Wi-Fi network, most do not even know where the Wi-Fi password is set. Thus, the network will not have protection, and anyone can connect to it. Let's solve this problem.

How to set a password on a wifi router? 3 simple steps!

In fact, learning how to deliver or can be a difficult business. This is explained by the fact that today the number of manufacturers of wireless routers is constantly growing. Each manufacturer uses its own shell to configure the router. To make your task a little easier, we will set a Wi-Fi password step by step.

Step #1. Open the web interface of the router.

Any modern router is configured using a web interface. Don't be intimidated by the word "web interface". In other words, this is an ordinary small website that has a router, and the site opens in any browser.

We use our favorite browser, go to the address bar, enter the IP address of the router there, often these are the addresses:

• 192.168.0.1
• or 192.168.1.1.

If you don't know which one to enter, you can simply enter them one by one. As soon as you have entered the router's IP address, you will see a form in which you must enter your login and password to access. After you have entered your username and password, the router’s web interface will appear in front of you. In the picture below, you will see the web interface for ASUS.

Step #2. We find the section with WI-FI settings.

We study the web interface in more detail, and notice the section where they are produced. There you can either set a password or change it.

As we see in the example of ASUS, in order to access the section, you need to go to the “Wireless Network” link and then go to “Advanced Settings”.

Step #3. Set a password for the WI-FI router.

In the section with WI-FI settings, select the authentication method, then the encryption algorithm, and then enter the key password) to access WI-FI.

1. Where “authentication” is indicated, you must select WPA2. This is a new product and at the same time a good security option.
2. We will set the encryption algorithm to “AES”.
3. Well, don’t forget about the password for WI-FI. To do this, use the “Key” field and enter a set of numbers and letters there.

After making the settings, do not forget to save, and then, if necessary, reboot the router itself.

These steps are enough to set up a password for WI-FI. When you continue to connect to the network, .

That's all for me! I hope you already know how to set a password for a wifi network in just a couple of clicks. If you still have questions for me, please ask them in the comments. And don’t forget to enter your email address at the end of the article and receive my lessons there. Peace for everyone!

With UV. Evgeny Kryzhanovsky

This manual will describe in detail the process of setting a password for a Wi-Fi wireless network on ASUS wireless routers. The guide is equally suitable for almost all routers (consumer segment), including ASUS RT-G32, RT-N10 and N12, as well as other popular models (different firmware will be discussed).

By protecting your network with a password, you will not only prevent unauthorized persons from using your Internet access (and as a result - a decrease in your speed), but also more serious possible consequences: for example, if you are not particularly versed in network Windows settings, then it may turn out that a neighbor will delve into your documents and photographs, and you will not know about it.

Login to the router web interface

The first thing to do is go to Wi-Fi settings router. It will be better if you set the password from a computer that is connected by wire to the device (but it is also possible via Wi-Fi, I will try to take into account and describe possible problems with this option).

Launch your browser and enter 192.168.1.1 in the address bar - this is the standard address for entering the settings of ASUS routers. It is also indicated on the sticker on the back, and there you will also find your username and password for logging in, usually admin and admin in both fields. (If they do not fit, it means you changed them during the initial setup, there are two options - remember or reset the device to its factory state. This is not a password for the wireless network, but a password for administering the Wi-Fi router settings).

Two options for the web interface for setting up Asus routers

Once entered correctly, you will be taken to the settings web interface, which may look like the image above. If you have an ASUS RT-G32, you will most likely see the option on the left; on ASUS RT-N10 and RT-N12 - a dark web interface (although on older firmware there may be the first option). The process of installing protection on a wireless network is no different.

Setting a password on ASUS Wi-Fi

In the router settings web interface, select “Wireless Network” from the menu; in fact, all parameters are set here, including the password for Wi-Fi network. The picture above shows the settings on the new firmware version, below there will be a screenshot with the old configuration web interface.

1. The SSID item specifies the public name of the wireless network by which you identify your network among all others. Don't use Cyrillic.
2. The authentication method (Wi-Fi encryption type) is recommended to be set to WPA2-Personal as the most secure.
3. Preliminary WPA key- this is the Wi-Fi password, enter the desired one, containing at least 8 characters, do not use Cyrillic and special characters.

Click "Apply" and wait for the wireless network settings to change.

If you were connected to the router via a wireless connection when making these settings, the connection with it will be disconnected and you may see an error in the browser window. All you need to do is reconnect via Wi-Fi to the ASUS router, but with new parameters.

Wireless WiFi network – great way for organization home network. You can connect to it not only mobile devices, but also desktop computers. This way you can significantly reduce the number of wires in your home. However WiFi network has one drawback. It is available to everyone within the coverage area of ​​the access point. In order to minimize the risks associated with this, you need to set a password for WiFi. In this material we will talk about how to set a WiFi password on a D-Link router.

Step No. 1. Go to the web interface.

Any router is managed through the so-called web interface. The web interface is a small website that is hosted on the router itself. Using this site, you can manage your router and change all settings. Therefore, if you want D-Link on your router, then you first need to log into the web interface.

To enter the web interface, open any browser and enter . If you don’t know what IP address your router is accessible at, then try 192.168.0.1 first, and then 192.168.1.1. In most cases, one of these IP addresses is used.

After you enter the router's IP address in the address bar, you will see an authorization form to log into the router's web interface. Here you need to enter the login and password for the router. Without this data, you will not be able to log into the web interface and set a WiFi password.

At this stage, it very often turns out that the user has forgotten or does not know the login/password for the router. If you also find yourself in a similar situation, then the following tips should help you:

• If you have not changed the login and password for the router, then you should try entering the standard login and password. In most cases, D-Link routers use the following login/password pairs: admin/admin, admin/password or user/user. Try them all, one after another.
• If your router was set up by another person, then contact him and ask for the password.
• As a last resort, you can reset the router settings. After resetting the settings, you will be able to log into the web interface using the standard login and password. But, you need to take into account that after resetting the settings, the router will have to be configured again.

Step No. 2. Go to the section with WiFi settings.

So, after you have entered the correct username and password, the router’s web interface should open in front of you. Next you need to go to the section with Wi-Fi settings. On D-Link routers, this section is called “SETUP – Wireless Settings”. In some cases, in order to access the settings you will need to additionally click on the “MANUAL WIRELESS NETWORK SETUP” button (see screenshot).

Step No. 3. Change the “Security Mode” parameter.

After this, a page for manually setting up a Wi-Fi network will open in front of you. If your router does not have a WiFi password set at all, then you need to start by changing the “Security Mode” parameter from “None” to “WPA-Personal”. This parameter sets the method of protecting the WiFi network. “None” mode means that protection is disabled and no password is used. While “WPA-Personal” provides optimal security and allows you to set a password for Wi-Fi.

Step No. 4. Set a password.

After changing the “Security Mode” parameter, we can set a WiFi password on our D-Link router. To do this, enter the new password in the “Pre-Shared Key” text field.

Once you have entered the new WiFi password, all that remains is to save the changes. To do this, click on the “Save Settings” button. Usually in the web interface D-Link routers, this button is located at the top of the page.

That's it, you have set a password for WiFi router and D-Link. After rebooting the router, the changes will take effect and in order to connect to Wi-Fi you will have to enter a new password.

The topic of this article is how to set a password for a WiFi network. Such networks are widespread. Almost every home already has wireless router or modem. But the manufacturer does not install keys for connecting via wireless communication. This is done so that the buyer can freely enter the settings menu and set their values.

It is worth noting that after purchasing and connecting to the interface for the first time, the manufacturer strongly recommends installing a new key to access the settings. On some router models, the user is not even given the right to choose. That is, you will definitely have to change your login and password. It is also recommended to make security settings.

So, how to set a password for a WiFi network. First, let's answer the question why this is necessary. The fact is that the access point, be it a router or a wireless modem, has a fairly large range. This means that not only you will be able to connect to the created group.

Very often, this is used by attackers or simply lovers of “freebies”. But if you do not have unlimited Internet (service package from your provider), then such unauthorized guests can greatly harm you. In addition, you risk losing confidential data or getting a virus on your computer. Therefore, wireless equipment manufacturers strongly recommend setting complex passwords.

How to set a password on WiFi: Video

How to encrypt your home Wi-Fi network

So we come to the main question, how to set a password on private network WiFi. As you already know, to organize such groups, routers, modems or other devices with a wireless adapter are used. In this case, we will talk specifically about routers. All security settings are set in the router settings. So first, let's enter the device settings menu.

We will look at how to set a password for a WiFi Internet connection using the D-LinkDIR-615 router as an example. So, we connect to the device using a cable or wirelessly. Now you need to open your browser. Enter the IP of your router in the address bar. In my case, the address is 192.168.0.1.

It is worth noting that this IP address is used in most cases. But, sometimes you can find these - 192.168.1.1, or 192.168.2.1. As a rule, all the necessary data is indicated in the instructions for the device or on the router itself (carefully inspect the router from all sides).

How to easily find out the IP address of a WiFi router: Video

Press "Enter". Now the system asks you to enter your username and password. Initially, the equipment manufacturer sets the following values ​​- admin, admin, respectively. Click “Ok” and get to the settings menu.

How can I set a password for my home Internet WiFi here? Everything is very simple. At the bottom of the screen you need to find and click the “Advanced settings” button. After this, several additional windows will appear. We are interested in the “WiFi” section, where you should enter the security settings.

In the window that opens, you can change only one parameter - network authentication. This is nothing more than a type of encryption. The default value is “Open”. This means that your network is not currently protected in any way. So, we need to choose the encryption type. It is recommended to install WPA-PSKWPA2-PSKmixed as it is the most secure cipher and provides a high level of security.

After this, a line will appear in which you must enter the key. In some cases, the system automatically generates a secure code and offers it. You, in turn, can leave it or change it to your own. After that, click “Apply”. That's all, now you know how to place it.

How to connect to a WiFi router: Video

But what if you are using a modem and not a router? How to set a password for a wireless Internet WiFi modem? Everything is extremely simple. The fact is that the settings of the wireless router are absolutely identical to the modem settings. These devices work in a similar way. The only differences are in the names of some sections. However, the setting principle is the same.

Just as with a router, you need to connect to the device and enter the IP address in the browser. After this, enter your login and password (admin, admin) and get to the modem menu. Find WiFi settings here and open security options. Then everything is as described above. Now you know the answer to the question of how to set a password for a private WiFi network. This will increase the level of security and prevent unauthorized connections by intruders.

If it so happens that your WiFi router provides an unsecured access point to the Internet, and you want only you to use your Internet, then it will be useful to know how to set a password on your WiFi router. Manufacturers such as: D-link, TP-Link, Zyxel and others. On the blog, I have already discussed this issue in several of my articles, but this article will be different in that I will talk not about one router model (as I did for the example), but several, and to be even more precise, I will talk about the most popular router manufacturers.

Of course, I won’t be able to cover the large circle of manufacturers that we currently have, but after reading the article, I think you will definitely have an idea of ​​how to change the WiFi password.

In order to protect your access point with a password, you need to configure the router by going to its settings. You will need to find out the router's IP address to gain access to its control panel.

How to find out the IP address of the router, login and password to configure it

The easiest way to find out the IP address of your router is to carefully inspect its case. Most often, the IP address is indicated on it. It may also contain the username and password that you will need to log into the control panel. In addition, the IP address, login and password can be specified in the router manual. You can also view them on the official website of the manufacturer.

Here's an example:

If the described methods did not help you or for some reason turned out to be difficult to implement, then there is the most accurate and accurate method for determining the router address. Go to Network and Sharing Center. This can be done by clicking the tray icon in the Windows taskbar and clicking on the corresponding inscription.

Once in the network control center and shared access, click on the left “Change adapter settings”, thereby opening a list of available connections. Find “Local Area Connection" (if your router is connected via cable) or "Wireless Network Connection" (if you are connected to the router via a wireless connection, that is, WiFi) and right-click on the icon, select "Status "

Then click Details. The router's IP address is indicated next to the "Default gateway IPv4" line.

Attention! This method will help you when you can connect to your router via WiFi or cable. If you are only going to customize it, then this is not for you!

If DHCP is not configured on the router, then read the articles I gave above. There you will find out what needs to be done.

Now that we have found out the IP address of the wireless router, it's time to start setting it up. To do this, enter the router's IP address in the browser's address bar and press Enter. The login page for the router control panel will open, in which we will need to enter the username and password. More often these values both fields "admin". Manufacturers have options: admin and an empty password, user – user, administrator – administrator, administrator and an empty password.

But again, I want to remind you, so as not to guess, you can read this information in the technical documentation that comes with the router or carefully inspect the router at the bottom of it. Once you have accessed the control panel, you can now move on to the core part of our procedure, which is how to set a WiFi password.

TP-LINK

How to set a WiFi password in TP-LINK: on the left in the menu, find the “Wireless” section, the “Wireless Security” subsection. In the main part, select “WPA-PSK/WPA2 PSK”. In the “Wireless password” field, enter the desired password (at least 8 characters). Click the "Save" button and reboot the router.

Now to connect to your router you will need to enter a password.

ZyXEL

Having gone into the control panel of the router, we find the “Wi-Fi Network” section on the left and select the “Security” subsection in it. The “Wi-Fi Security Settings” window appears. Opposite the “Authentication” line, select “WPA-PSK/WPA2-PSK” from the drop-down list, and opposite the “Network key (ASCII)” line, enter the password we created. Click “Apply” and reboot the router:

D-Link

We discussed above horizontal menus controls, and now let's look at vertical ones from D-Link manufacturers. How to set a WiFi password in D-link: having opened the control panel, click “Wi-FI” and select “Basic settings”:

In the window that opens, set the network name (SSID) and click “Change”. This must be done if you have not used WiFi function in your router. If your router has already distributed WiFi and you just need to set a password, then go to the “Security Settings” tab.

In this tab you just set the WiFi password. Select the encryption type “WPA2-PSK”, in the line “PSK encryption key” enter your invented password for the access point. Click “Change” and reboot the router.

Note: in each case I told you to reboot the router after changing the password and this moment is sometimes very important so that everything goes smoothly. Sometimes, when changing settings in the router, problems occur and in order for all the changes to be applied, just in case, it is better to reboot the router. Although this is not necessary, you should be aware of it.

It happens that you did not buy a new router in a store, but borrowed it from a friend or bought it used. In this case, the default settings of the manufacturer can be changed in the router, that is, for example, the IP address, login and password for logging into the router control panel can be changed. In this case, you need to reset the router to factory settings. How it's done?

Routers have a button on the back panel that is pressed with a thin object, such as a pin. With the router turned on, press and hold it pressed for 6-10 seconds. After this, the IP address will again become 192.168.1.1 or 192.168.0.1, the login and password will be “admin”.

Important! Please note that all router settings will be reset, namely provider settings, passwords, access points, IP addresses, etc... Therefore, before performing a general reset, write down or remember everything that may be useful to you.

We have just figured out how to set a password for a Wi-Fi router. In principle, all the steps are the same: find the tab with the wireless connection settings, and then enter your password in the appropriate field. The main thing is to take your time and everything will be fine! But before setting a Wi-Fi password in the router, you can look up this password in Windows - this procedure is easier, as you don’t have to deal with IP addresses, logins and passwords. Read about this method using the links given at the beginning of the article.

Video with an example of how you can set a password on WiFi:

Wi-Fi is a unique technology that provides wireless network access from any device (tablet, smartphone or computer). For this access to work uninterruptedly, competent customization of the Wi-Fi network and the device that guarantees its operation - the router - is required. A router or router is a device that provides capabilities for the reliable operation of a Wi-Fi network. In order for Wi-Fi to function stably and without failures, the router must be configured correctly. Brief instructions for setting up a wireless network and equipment -.

In the material presented to your attention, I will tell you how to set a password for a Wi-Fi router, as well as how to set a password for a Wi-Fi network so that unauthorized users cannot connect to your network and use Wi-Fi from their devices. It's about ASUS router RT-N12E_B1, since devices of this brand are quite popular in the user environment, are reliable, easy to configure and available on the market.

How to set a password on an ASUS router with Wi-Fi access?

The first thing you need to do before setting a password is to connect the computer with which you plan to configure the router to the router itself using a wire. The cord from the provider is connected to the WAN port of the device, and the double-sided PC cable is connected to the LAN port.

When the cable is properly connected, you first need to go to the router settings configuration page, where you set the parameters for accessing the provider. To know which address to access this page, turn the device upside down and look at the bottom cover for the IP address, which can be used to get to the settings web page. The login and password used to log in by default are also indicated here.

As you can see, the specified IP address is 192.168.1.1. You can get to the web page to configure the router using your login admin with password admin, but such authentication data is available on all Wi-Fi configuration devices without exception, so given password It’s worth changing in any case in order to protect your router from hacking. Read about what passwords you should use.

So, let's go to the above address. As a result, we got to the device configuration web page. We go to the “Administration” section and there we go to the “System” tab.

As you can see, there is a “Change router password” field here. It is here that we can change the password for our device by entering the updated value in the “ New password" field and confirming it in the “Re-enter new password" field.

So, we changed the password. Now you need to apply the changes and save them to the device. Scroll the page to the very bottom and find the “Apply” button. Let's click it.

Ready. The device will now reboot for the changes to take effect. We log in with a new password.

How to set a Wi-Fi password on a router?

A Wi-Fi network, like a router, needs to be administered. It is worth choosing the most optimal channel for it, installing gateways and DNS servers, and, of course, also setting a password for security. Below I will tell you how to set a password for a Wi-Fi network.

We go to the “Wireless Network” section and remain on the first tab called “General”. In the SSID field, indicate the name of the wireless network, which will be visible in the list of networks on your device. Another quite important field is the “Authentication Method”. Here we specify the security method that will be used for your network. At home, it would be most advisable to use the “WPA2-Personal” protocol, since it provides a simple authentication procedure and is also quite reliable and stable.

The password itself is specified in the “WPA Pre-Shared Key” field. Come up with a value that will not be too easy for a cracker, and that will accommodate uppercase and lowercase letters, as well as interspersed with numbers. If it’s difficult for you to choose such a key yourself, use one of the online services for randomly generating profiles, of which there are plenty on the Internet.

How to set a Wi-Fi password on a D-Link router?

On devices of any other models, the Wi-Fi password is set in exactly the same way. Consider the case of the D-Link router. These routers are most often used at home, along with TP-Link. This indicates the high quality of the device and its excellent regional adaptation for the domestic market.

We log in using the IP address indicated on the bottom of the device. By default, as on ASUS routers, the word “admin” is used for authentication as a password and login.

If someone has already set up your device (for example, a computer technician), it is quite possible that this pair of values ​​will not work. Under such circumstances, you need to ask the person who set up your device what password he set. If this is not possible, all parameters of the router can be reset by pressing the RESET button on the rear panel of the device (pressing and holding for 5-10 seconds, then releasing and waiting for about a minute). If you decide to perform a reset, it is important to know that all settings will be lost, and the Internet will have to be set up from scratch.

The interface varies greatly on different firmware of D-Link routers, but I will assume that you have firmware version 1.4.x or later. At the bottom of the configuration form, click on the “Advanced Settings” option, and then in the Wi-Fi section, click on the “Security Settings” category.

Here, in the “PSK encryption key” field, enter the current key with which you would like to protect your Wi-Fi connection. After that, click on the “Change” button at the bottom right. Now we are taken to the next settings page, where we will be asked to save the changes. Click “Save” and voila: you’re done.

Good afternoon, dear readers. In this article I will tell you how to set a password on a D-Link wi-fi router. Setting a password for wireless Internet (wi-fi) is necessary primarily for security and limiting access to your Internet for other users. A wireless connection is less secure than a wired one. Therefore, if you do not have a password set for wi-fi, then anyone can access the Internet through you and also gain access to your information.

So let's get started setting a password on wi-fi router D-Lin. To set a password for Wi-Fi, follow these steps.

First of all, we need to go into the settings of our router.

Step 1 . Open a browser on your computer. In the address bar, enter 192.168.1.1 . This is the address for setting up your wi-fi router.



Step 2 . Next enter the word admin in the field Username Password . Click Login to enter the main menu of the router.

Step 3 . If you entered correctlyUsername password , then you will be taken to the main menu of the router. On the right side of the window Select a section WiFi by clicking the left mouse button once. In the menu that opens, click on the linkSecurity Settings

Now almost every family has several Internet users, and in their apartment or house they connect devices to the network via a Wi-Fi router. Initially, no one thought much about how to set a password on WiFi, since there were few such devices and it was not important. Nowadays, many phones, not to mention smartphones, tablets and laptops/netbooks, have a WiFi unit, and everyone strives to take advantage of the free Internet. We will resist this!

The point is not even that you feel sorry for distributing, for example, your traffic to your neighbors. The problem is that these neighbors, if they wish, can separate you from their own Internet by placing a code on the entrance, and with good knowledge of technology, they can seriously harm your computer.

So the password for WiFi? This is not at all difficult if you have everything configured and working and only the desired code is missing. You need to start by logging in. Regardless of the router model, enter http://192.168.1.1 or 192.168.10.1 into the browser line. A window will appear requiring you to enter your username and password. If you haven't changed anything, it will be admin in both cases. We type and find ourselves in the device parameters. Now we will perform the following task: in order for it to require digital permission from everyone entering.

The general design of the settings section may differ slightly depending on different models, but the system itself, the essence, remains the same. We are looking for the wireless item, one of the options for the path to it is: Inetrface setup > wireless. We are considering the English version of the menu and the absence of a book with instructions, since if there is a Russian menu, any “teapot” can set up WiFi.

We find Authentication Type there, select, for example, wpa-psk, or another type of encryption, look for the very place where, finally, you need to enter the password. We enter it - and that’s it, the job is done. We save the settings, and now no one except people who know the code will connect to your Internet. When deciding how to set a WiFi password, try to make sure that it cannot be guessed or hacked by anyone. Come up with a combination of numbers and letters no shorter than eight characters.

Pay attention to the name of your network. If it is similar to others located nearby, then change it in the SSID line. If it is still difficult for you to do all of the above, then invite a specialist or contact the technical support of your provider.

It also happens that the task of setting a password on WiFi becomes noticeably more complicated if for some reason you were unable to get into the router interface. In this case, you will have to reset all its settings. To do this, you need to press the Reset button recessed on the rear panel for a few seconds.

Next, in the same way as described above, go to its settings. In devices produced earlier, it was necessary to manually enter all the settings, first taking them from the provider, and partly from the computer’s network settings. Modern routers allow you to access the Internet almost automatically by pressing just a couple of buttons. There are quite a few of their models, and there are also many providers, so the path to access the network may differ. You can find it out from the latter, or by typing the corresponding query in a search engine. Do not forget the password itself only after completing the connection process!

Good day!

- Why does my Internet slow down every evening, I can’t download anything, and pages take a long time to open? - an acquaintance once asked me.

The next day, after looking at his Internet settings, programs, router, etc., I was surprised by only one thing: his home Wi-Fi network was not protected with a password (there simply wasn’t one). Oddly enough, after setting a password, the slowdowns and lags of the Internet stopped, and in the evening the Internet began to work as expected. Apparently, there were some neighbors who successfully used his Internet channel, just in the evenings everyone comes from work/school, etc.

In general, I will give one piece of advice: in any case, if you have any suspicions, change the password for the Wi-Fi network. If you don't have it at all, be sure to install it (even if you have a very fast unlimited Internet).

In this article we will look at how this is done.

Important! You also need to change your Wi-Fi password because those who connect to your network will use the Internet under your IP address. In principle, if they only occupy your Internet channel, it’s not so scary.

But just imagine, what if they commit illegal actions - the first person they come to will be you (most likely)! I think there’s no need to explain that it’s better to avoid such visits? Therefore, PASSWORD is required!

To change the password for accessing a Wi-Fi network, you need to do approximately the following:

• go to the Wi-Fi router settings;
• then open the tab/section for setting up a wireless network (also called Wireless or Wi-Fi);
• select in this tab certificate of safety, encryption type, And password to access the network.

In general, everything is quite simple. Before moving on to specific router models and their configuration, I will focus on several important parameters (mentioned above).

Certificate of safety

The most popular security certificates, which are found in almost every router, are WEP, WPA-PSK and WPA2-PSK. Today, the best security is provided by the WPA2-PSK certificate, which is what I recommend choosing.

If devices that do not support WPA2-PSK will connect to the Wi-Fi network, then choose the WPA-PSK option (some routers have a mixed WPA/WPA2-mixed mode).

By the way, some inexpensive router models may not work stably and break the connection when WPA2-PSK is selected. In this case, try limiting the speed of the router and changing the security certificate.

Encryption type

Closely related to the security certificate. If you select WPA, the temporary key integrity protocol TKIP is used; when using WPA2, the secure AES standard is used. This is exactly what I recommend starting from. If you select settings other than this, you may experience problems connecting devices to your network.

Selecting a password

Here, perhaps, I will say only the most basic things that I think about his choice. I noticed that many users put very simple passwords, type: 11111111, 2222222, 11111122222, etc. Such passwords are quickly selected and cracked.

It is unlikely, of course, that someone will purposefully and for a long time select the password for your home Wi-Fi network (especially since the vast majority of them do not contain any valuable data), and nevertheless I will give a couple of tips on what it should be password:

At least 8 characters;

It is advisable to use both letters (Latin) and numbers (of course, some will also say special characters - but in my opinion it’s not worth it, it’s too tedious to type them later on a phone or tablet when connected to the network);

Do not use your names, standard words (password, admin, computer, etc.), the most famous dates, etc.

Now let's move on to specific router models. So...

You might find this article useful on how to enter your router settings. In some cases this cannot be done (link is given below)...

How to log in via 192.168.1.1: entering the router settings -

D-Link

One of the most popular brands of routers in our country. There are quite a large number of models, but there are not so many firmwares that differ from each other (fundamentally), 3-4 pieces. In this article I will give several of their variations, and first a few important parameters.

IP address (default) to enter settings: http://192.168.0.1

(it is advisable to use Internet browser Explorer)

Login(default): admin

Password(default): either an empty string or the same admin.

In older router models (such as DIR-300, DIR-320, DIR-615, DIR-651), as a rule, the firmware is not translated into Russian and is presented in this orange-gray design. To change the password, you need to go to the router settings (if you can’t log in, then just above in the article there is a link to instructions for solving the problem) , and open the section "Setup/Wireless setup".

At the bottom of the window in the column Network Key enter your password (see screenshot below), by the way, you can also set it there security certificate and encryption type(what this is - see above in the article). After entering the settings, save them - button Save Settings.

DIR-300 - setting a password // Setup/Wireless setup

By the way, there is similar firmware in Russian translation, it is configured in the same way.

For router models DIR-300 NRU and DIR-320 NRU(firmware version 1.2) the settings page looks a little different: a nice white background, all the main settings sections are presented on the left side. Opening "Wi-Fi/Security Settings" , and install:

1. network authentication: WPA-PSK (for example);
2. PSK encryption key: this is your password;
3. WPA encryption: TKIP+AES.

For D-Link DIR-620/DIR-320 NRU routers in firmware versions 1.3 and 1.4 the interface is slightly different: when you go to main screen, you see a gray background and tiles (like in Windows 8) on which the main settings sections are displayed.

To change the password, you need to open the “Wi-Fi/Security Settings” section (number 1 on the screen below), and then enter:

1. network authentication: WPA2-PSK (for example);
2. Encryption key - enter the password;
3. WPA encryption - AES (see screenshot below).

Router from Rostelecom (Sagemcom)

In general, as a rule, no big problems arise with routers from Rostelecom - everything works as expected. And when you connect to the Internet, they will give you a password and set everything up. The firmware in routers is completely in Russian, so questions about its configuration usually do not arise.

Address to enter settings: http://192.168.1.1/

Default password and login: admin

Browser: almost any: Opera, Firefox, IE, Chrome, etc.

To set a password, open the section "WLAN Setup/Security" . Further in the subsection "Manual setting access points" select:

1. Authentication - WPA2-PSK;
2. WPA/WAPI password - enter your password;
3. Encryption WPA/WAPI - AES;
4. then click the button "Apply/Save" (screenshot below).

Actually, that's the whole setup...

Tp-Link

One of the largest manufacturers of routers, tens of millions of people around the world use their products. In our country, their routers are also very popular, and cope quite well with Russian networks (they work with almost all Internet providers).

IP address to enter settings: 192.168.1.1 (in rare cases 192.168.0.1 , depending on the firmware version);

Username: admin;

Password: admin (type without periods, commas, etc.).

Most often you have to deal with the so-called “green” firmware. Found in routers: TP-LINK TL-WR740xx, TL-WR741xx, TL-WR841xx, TL-WR1043ND(45ND), etc. About 50/50 firmware is in English/Russian.

The screenshot below shows the English version: to change the password, you need to open the section "Wireless/Wireless Security" , then select WPA/WPA2 -Personal and put:

• Version - Automatic (Recommended);
• Encryption - Automatic (Recommended);
• enter the password in the line PSK Password .

TP-Link (green firmware)

Almost identical actions will need to be done in the Russian version of the “green” firmware: open the section "Wireless Security" , then set PSK password(see number 3 on the screen below).

TP-Link "green" firmware (Russian version)

You can also quite often find a “blue” version of the firmware in TP-Link routers(for example, TP-LINK WR340G, TP-LINK WR340GB and other similar models).

Their setup is almost identical:

1. first open the section "Wireless Settings" ;
2. in the column Security Type install WPA-PSk/WPA2-PSK;
3. Security Option- set Automatic;
4. Encryption- install Automatic;
5. PSK Passphrase- this is the password (slightly different spelling than in other firmware versions). It must then be specified when wireless connection to the router.

TP-Link "blue" firmware

After making the settings, save them (button Save on the screen above, see number 3).

TRENDnet

The access parameters are relevant provided that the router has factory settings and its IP has not changed.

IP address to enter settings: http://192.168.10.1

User Name (login): admin

Password (password for access): admin

In general, TRENDnet routers most often have 2 firmware versions: blue and gray (in both Russian and English).

To configure security and set a password in the blue firmware, for example, of the TRENDnet TEW-432BRP router, you must do the following:

1. open section Wireless/Security ;
2. in field Authentication Type select WPA;
3. in field PSK/EAP select PSK;
4. in field Cipher Type select Auto;
5. in field Passphrase and Confirmed Passphrase enter your password and press Apply(screen below).

In the “gray” version of the firmware (for example, as in the TRENDnet TEW-651BR router), actions are performed in the same way, even menu items are located in the same places.

Asus

IP address (web interface): 192.168.1.1

In the authorization lines, type login: "admin", password: "admin" (enter without quotes!). Browser preferably IE (although modern versions of the web interface work well with all popular versions Firefox browsers, Chrome, Opera, etc.).

Most often, ASUS routers have two firmwares: “blue” and “black” (usually localized in Russian).

To change the password in routers ASUS RT-N10E, RT-N10LX, RT-N12E, RT-N12LX, etc. (this is with blue firmware), you need to open the section "Advanced settings/Wireless network/General tab" .

In the column "WPA pre-shared key" enter your password and save the settings.

ASUS // "blue" firmware

In ASUS RT-N10P, RT-N11P, RT-N12, RT-N15U, RT-N18U routers, the firmware (in terms of password settings) differs only in color. In it you also need to open the section "Wireless network" , tab "Are common". Then change the column "WPA Preshared Key" and save the settings.

ASUS // "black" firmware version

Zyxel

• IP address of the router on the network (web interface): 192.168.1.1
• Login: admin
• Password(default): admin

To change the password on ZyXEL Keenetic of the first series, you need to go to the web interface, open the section "Wi-Fi network", tab "Safety" . Next set the following parameters:

• Authentication- WPA-PSK/WPA2-PSK;
• Type of protection- TKIP/AES;
• Format network key - ASCII;
• Network key (ASCII)- set your password, which you will then need to specify when connecting wirelessly to the router.

In newer routers (for example, Zyxel Keenetic II: Start, Giga, Omni, Viva, Extra) a slightly different firmware is installed. To change the password in them, you need to select the section in the menu "Wi-Fi" and then select the tab (top) - "Access point" .

NetGear

• IP address to enter the router settings: 192.168.1.1
• Login: admin
• Password(default): password
• You can use almost any browser: For example, Internet Explorer, Mozilla Firefox, Opera, Safari, etc.

To change the password in NETGEAR routers (using the model WNR2200 as an example): open the "Wi-Fi Settings" section, then set:

• Security options: select item WPA-PSK (TKIP) + WPA2-PSK (AES) ;
• Passphrase: enter your password (you will need to enter it later when connecting wirelessly to the router).

Basically, in this short article I tried to look at all the most popular router models. If you have a different model from those given, the operating technique will not change: first you need to find the IP address to enter the router settings (can be found in the documents for the device, or on the manufacturer’s website to determine the characteristics of the PC).

Then, by entering the router settings, open the section Wi-Fi security(or Wi-Fi settings) - then set the desired password and save the settings. Difficulties most often occur when entering the router settings: either the password does not match, or the IP address is incorrect, or something else...

This is where I end this article, hello amigo!