Bootable flash drive windows 7 ultraiso. Burn an image to an ultraiso flash drive: making the complex simple

Probably the most popular operating system today is the Windows operating system. Some people like the new one Windows version 8, for some Windows 7, and for others Windows XP just won’t leave.

This program is installed directly from installation disk. But there is another installation option operating system Windows. You can create a special bootable USB flash drive.

A bootable flash drive would be an ideal option, for example, for netbooks that are not equipped with disk drives. And, in general, a flash drive is more compact than an installation disk.

To create a bootable USB flash drive, you can use several programs. But in our case we will use the Ultraiso program.

First of all, you need to open the program itself. You need to open it with administrator rights. That is, you need to right-click on it and select "Run as administrator".

It is worth noting that before the entire procedure you will need to download the operating room image Windows systems.

Next in the program menu you will need to select the item "File" and select it "Open".

Find the folder with the Windows image and open it.

After all this, you will need to select the item in the program menu. Here we select a section "Record from hard drive".

After this, you will need to select the device to which the recording will be made. In our case it will be a flash drive. And we confirm our actions with the button "Record".

It is worth noting that the size of the flash drive to carry out this operation must be at least 4 GB.

After you press the button "Record" A window will pop up asking you to confirm your actions again, warning that all information that was on the flash drive will be deleted. You must confirm your actions.

The recording will last for several minutes. After this time, the recording will be completed and you will receive an installation flash drive.

Nowadays, the use of disks is no longer popular, since many PCs and laptops are produced even without a disk drive. For this reason, the question of how to make a bootable USB flash drive for Windows 7 (UltraISO or another program will be used is up to you) is more relevant than ever. Let's figure out what you need to have to create it and why you might need such a bootable flash drive.

Possible and problems

Using an operating system such as Windows may be accompanied by various unexpected problems and malfunctions. The operating system often starts to work with serious glitches, and sometimes even stops loading. It is impossible to insure yourself against this, and also to predict such a state of affairs.

It happens that problems with the operating system are eliminated by the usual system restore function. To do this, you just need to launch it, if, of course, you made save checkpoints and you had this system running. If there is no way to start recovery, then Windows 7 can save the situation. Of course, you can run from a Windows disk, but a flash drive is more convenient and mobile. Moreover, netbooks, for example, do not have a disk drive.

Reinstalling the system - solving the problem

There are often cases when a serious problem can only be fixed by reinstalling your OS (an image will also work for this bootable flash drive Windows 7) if you did not have the feature enabled Reserve copy Windows and data. A disk or flash drive with an image can be used for recovery, reinstallation, and reinstallation of the system.

Advantages of a flash drive

Most often, of course, the distribution kit with the operating system is recorded on a regular DVD. But, you see, this is no longer relevant now. And storing an OS image on such a disk is quite difficult due to the fact that it can easily be damaged by any mechanical impact. Just one small scratch can render the drive unrecoverable, and therefore your system as well. A bootable Windows 7 flash drive (ISO image on it) will be a way out of this situation. Installing a Windows system from a USB flash drive is no different from the usual process of installing an operating system from a disk.

A USB drive with an operating system image is better protected from various types of damage than a DVD disc. In addition, the flash drive is smaller in size and can be easily moved without any problems or damage.

Main question

And, of course, the main question is how to make a bootable USB flash drive for Windows 7. UltraISO is one of the programs that will help you easily and quickly create an image of any disk. Besides it, there are also other applications for these purposes. But we will talk, as you already understood, about the UltraISO program.

Tricks of the program

This program is paid, but nevertheless has some free trial period. You will be able to use free version UltraISO, but with one limitation - the file size of your image should not exceed 300 MB. Yes, this is such a cunning program. A bootable Windows 7 flash drive will undoubtedly not fit into these megabytes. So the solution would be portable versions of the UltraISO program.

Rules for creating an image for a flash drive in UltraISO

So, we come to the main question of this article. To how it is created USB bootable Windows 7 flash drive using UltraISO. By the way, in a similar way you can burn the image of the now popular Windows 8 onto it.

To create a bootable flash drive in this program, you first need to run it with administrator rights. After that, click “Open” at the top of the UltraISO program window panel. Next, in the explorer window that opens, you need to select the Windows operating system image for further recording on a flash drive.

In the window called “Open ISO file” you must select the image of your operating system and click on the “Open” button. If you are interested in how to make a bootable USB flash drive for Windows 7, UltraISO will give you the opportunity to select the Windows 7 OS image, as well as any other: Vista, XP, Eight. Next, in the program window, on the right side, an image of the required operating system appears. Now connect your flash drive to your PC via a USB connector, if you have not already done so.

Features of a flash drive and its formatting

It is important to note that a flash drive for recording an image of the popular Windows 7 or Eight operating system must have a memory capacity of at least 4 GB, and also be formatted in file system FAT32. In order to do so, you can also use the UtraISO program right before you start recording the image.

note

Remember that if there is any data on the flash drive that you need, and you do not want to lose it forever, then copy it somewhere before formatting. After all, this procedure will delete all data from it.

Further creation steps

After that, in the program window, click on the “Boot” button, and then in the context menu, select the item that offers to record a hard drive image. Then, after a window called “Burn disk image” appears, you must make sure that you have selected the correct disk to create a bootable flash card with the operating system. You must be sure that the flash drive is located on the correct letter of the alphabet.

Next, in the “Recording method” item, click “USB-HDD+”, and then proceed to format the drive or directly record the image of the Windows 7 operating system. If the flash drive was formatted in advance, before recording the image, then you simply click “Burn”. If you do so in advance, first click on “Format”.

UltraISO formatting process

So let's look at the steps for in this program. In the “Format” window, you need to select the FAT32 file system, and then click “Start”. Then click OK in the warning window. Formatting, as already mentioned, destroys all data on the flash drive.

After this process is completed, a window will appear in which you will be notified that the operation was successful. Click OK again and close the formatting window.

The next step is to go to the Write Disk Image tab and click “Burn” to start creating a flash drive with the image. You will see a “Hint” window, which will warn you that all data from the card will be deleted. Click "Yes". Now the process of recording the operating system has begun. The speed of writing a USB flash drive with an image directly depends on the capabilities of your PC. After a while, the image will be written, which you will learn from the Write Disk Image tab, where a notification will appear that the recording has been completed. Well, you have learned how to make a bootable USB flash drive for Windows 7. You can close UltraISO, it has already done its job.

Finishing touches

After all of the above and done, you need to open Explorer and make sure that the image of the Windows operating system is actually recorded on the drive. If you open the flash drive, you will see a system image there. As mentioned earlier, the process of creating an image of another version of the OS is no different from this. In order to install the operating system, you will need to enable priority for loading the OS from a USB drive in the BIOS.

Now you are not afraid of any failures or malfunctions, because you will always have a working bootable flash drive with a system for restoring or reinstalling Windows at hand, which will allow you not to waste time searching for a new image if any problems arise. The last fact is very important in our dynamic times, when every second counts. In addition, such a solution will be relevant for those who make money by installing and reinstalling operating systems. Agree, it’s much more convenient to carry a flash drive with you, and every PC has USB outputs.

In order to install the Windows operating system, you need boot disk or bootable flash drive. Almost everyone now has a flash drive, so it’s easier and more convenient to make a bootable flash drive. There are many methods and programs to create a bootable USB flash drive, for example Windows 7 USB DVD Download Tool. One of the most popular programs is Ultraiso. First, you need to download and install Ultraiso, download to HDD an image of the operating system that needs to be installed and insert the flash drive into the USB connector. When all this is done, you can proceed:

Launch Ultraiso
	Launch the Ultraiso program. Please note that it must be run with administrator rights.
Opening the Windows image
	Now we need to open the image of the Windows operating system, which we will write to a flash drive. To do this, select Open from the File menu. You can also use the keyboard shortcut Ctrl+O.
	Open the folder with the Windows image, select it and click on the Open button.
Let's start recording the image on the flash drive
	When the image file is open, select the item from the menu Burn a Hard Disk Image.
	Select a flash drive to record to Windows image(in my case (E:, 8GB) JetFlash Transcend 8GB), the recording method is usually USB-HDD. When everything is selected, click on the Burn button.

	All information on the flash drive will be deleted. We confirm this and click on the Yes button.
	The process of writing an image to a flash drive takes several minutes. You can drink tea :)
Bootable USB flash drive successfully created
	At the end, a message will appear indicating that the recording is complete. To close the window, click on the Back button, then you can close the program. The bootable USB flash drive has been successfully created.

Era optical disks slowly fades away and is replaced by external storage media, flash drives. In this regard, users have learned to create bootable Windows flash drives and, as it turns out, this is much more convenient. This article is devoted to the topic of creating a bootable Windows 7 flash drive using the UltraISO program.

In general, there are quite a few programs for creating bootable flash drives, but not everyone can write an image as follows the rules of bootable media. The UltraISO utility does this very well, which is why I discuss it in my article. For example, you can read the article How to create a bootable USB flash drive for Windows 7 using the Rufus program, by the way, it is also a very convenient utility.

The program is paid, but has trial period, which is enough for us to create a bootable USB flash drive. You can download it on the website http://ultraiso-ezb.ru/.

After we launch the program, it is advisable to run it as an administrator, because the program may not work correctly.

In the window that opens, click on the tab file, where we select the item open.

Our image files should appear in the window on the right.

Now go to the tab where we click the item burn a hard disk image.

A window will open where in the disk drive drop-down list, select the flash drive on which the Windows 7 installation files will be written , Leave the recording method as USB-HDD+ and press the Record button. To create this kind of drive, it is recommended to use a flash drive with a capacity of at least 4 GB.

A warning window will appear indicating that all information stored on the disk will be deleted, agree and click the button Yes. Before creating a bootable USB flash drive, do not forget to check if the necessary files are there.

The process of creating a bootable Windows 7 flash drive begins. We wait a few minutes.

At the end of the process, a completion message will appear, press the button back and close the program.

ABOUTGive your opinion about this article, and of course, ask your questions if something suddenly goes wrong for you.

Thank you for your attention!

Creating a bootable USB flash drive in UltraISO is the easiest way to burn Windows installation. And, perhaps, the fastest. Just a couple of minutes and you’re done (provided, of course, that you have a normal PC).

Before you start, you need to install the program. You can download it from the official website (link).

How can I create a bootable USB flash drive using UltraISO?

You just need to follow the following instructions:

1. Launch the program (you need to run it as an administrator).
2. Next you need to open the installation image Windows file, which you want to record. To do this, select File – Open (or you can press Ctrl + O).
   
3. Specify the folder in which the Windows image is located, select it and click the “Open” button.
   
4. If you did everything correctly, it should look like this:
   
5. Now let's start recording. To do this, in the top menu you need to select the following items: Bootstrap – Burn hard disk image.
   
6. Next, select your flash drive, leave the recording method the same – USB-HDD+ and press the “Record” button. IMPORTANT! This will delete all your data on the USB flash drive. Therefore, before performing step 6, it is recommended to save all files (for example, to a computer).
   
7. Actually, the program will warn you about this. If you have saved all the data (or you do not need it), agree and click the “Yes” button.
   
8. The recording can last from a couple of minutes to an hour (or even more). It depends on the power of your PC or laptop.
9. After the recording is completed, the program will inform you that the process has been completed successfully.

If you do not have a Windows image, but have a licensed installation DVD, then you can make a bootable USB flash drive using it

To do this, in the 3rd step you need to indicate the path to the drive where the DVD is located by selecting the items: File - Open DVD.

Creating a bootable USB flash drive from a folder with files

Finally, there is another way to create a bootable USB flash drive in UltraISO. It is suitable if a licensed digital copy is already saved in a folder on your computer.

To write installation files to a USB flash drive, you must do the following:

1. Launch UltraISO and select the following items: File – New – Bootable DVD image.
   
2. A new window will appear in which you need to specify the path to the Windows distribution (this is the bootfix.bin file, which is located in the boot folder).
   
3. After that, at the bottom of the program, select the folder where the Windows files are located and move all the files to the top.
   If the indicator at the top right turns red, just click on it and select 4.7 (4.37 Gb).
   
4. And then follow the instructions, starting from the 5th point.

After some time, the bootable USB flash drive will be ready.

P.S. If for some reason creating this bootable USB flash drive in UltraISO did not work (an error appeared or something else), try repeating the procedure, carefully following the instructions. As a last resort, you can always write it with another program - fortunately there are plenty of them.