How to password protect wifi on a laptop. How to secure your home Wi-Fi network with a password

I welcome everyone! Recently, I was asked to tell you how to put a password on a wifi router, otherwise people are tired of distributing their Internet to their neighbors.

Certainly, the Wi-Fi network has become a very popular wireless network, which is especially attractive for users of tablets, smartphones, laptops. But often regular PCs also connect to a Wi-Fi network. This technology is also good because there will be no stupid wires in the apartment or office that spoil the surrounding view, as well as the design. However, do not forget about the security of such a network. When users set up a Wi-Fi network, most don't even know where the Wi-Fi password is set. Thus, the network will not have protection, and anyone can connect to it. Let's solve this problem.

How to put a password on a wifi router? 3 easy steps!

In fact, learning about how to put or can be a difficult business. This is explained by the fact that today the number of manufacturers of wireless routers is constantly growing. Each manufacturer uses its own shell to configure the router. To make things a little easier for you, let's set a Wi-Fi password step by step.

Step #1. Open the web interface of the router.

Any modern router is configured using a web interface. Don't be intimidated by the word "web interface". In other words, this is an ordinary small site that has a router, while the site opens in any browser.

We use our favorite browser, go to the address bar, enter the IP address of the router there, often these are addresses:

• 192.168.0.1
• or 192.168.1.1.

If you do not know which one to enter, then you can enter them simply in turn. Once you have entered the IP address of the router, you will see a form in which you must enter your login and password for access. After you have entered your username and password, you will be presented with the web interface of the router. In the picture below, you will see the web interface for ASUS.

Step #2. We find the section with WI-FI settings.

We study the web interface in more detail, while noticing the section where . There you can either set the password or change it.

As we see in the ASUS example, in order to access the section, you need to go to the "Wireless network" link, and then go to "Advanced settings".

Step #3. We put a password on the WI-FI router.

In the section with settings from WI-FI, select the authentication method, then the encryption algorithm, and then enter the key password) to access WI-FI.

1. Where there is "authentication" you must select WPA2. This is a novelty and at the same time a good security option.
2. Set the encryption algorithm to "AES".
3. Well, do not forget about the password for WI-FI. To do this, use the "Key" field, and enter a set of numbers and letters there.

After the settings have been made, do not forget to save, and then, if necessary, restart the router itself.

Such actions are enough to set up a password for WI-FI. Upon further connection to the network, .

That's all for me! I hope you already know how to set a password for a wifi network in just a couple of clicks. If you have any questions for me, please ask them in the comments. And do not forget to enter your email address at the end of the article and receive my lessons on it. Peace for everyone!

With Uv. Evgeny Kryzhanovsky

This manual will describe in detail the process of setting a password for a wireless Wi-Fi network on ASUS wireless routers. The guide is equally suitable for almost all routers (consumer segment), including ASUS RT-G32, RT-N10 and N12, as well as other popular models (different firmware will be considered).

By protecting your network with a password, you will not only avoid unauthorized people using your Internet access (and, as a result, your speed drop), but also more serious possible consequences: for example, if you are not particularly versed in network Windows settings, then it may turn out that the neighbor will delve into your documents and photographs, and you will not know about it.

Login to the web interface of the router

The first thing to do is go to wifi settings router. It will be better if you set the password from a computer that is connected by wire to the device (but you can also use Wi-Fi, I will try to take into account and describe possible problems with this option).

Launch your browser and enter 192.168.1.1 in the address bar - this is the standard address for entering the settings of ASUS routers. It is also listed on the sticker on the back, where you will also find the username and password for logging in, usually admin and admin in both fields. (If they do not fit, then you changed them during the initial setup, there are two ways out - remember or reset the device to the factory state. This is not a password for a wireless network, but a password for administering the Wi-Fi settings of the router).

Two options for the web interface for setting up Asus routers

After entering it correctly, you will be taken to the settings web interface, which may look like the one shown in the image above. If you have an ASUS RT-G32, you will most likely see the option on the left, on ASUS RT-N10 and RT-N12 - a dark web interface (although older firmware may have the first option). The process of installing protection on a wireless network is the same.

Setting a password on ASUS Wi-Fi

In the web interface of the router settings, select the "Wireless network" item in the menu, in fact, all parameters are set here, including the password for wifi network. The picture above shows the settings on the new version of the firmware, below there will be a screenshot with the old configuration web interface.

1. The SSID item specifies the public name of the wireless network by which you identify your network among all others. Do not use Cyrillic.
2. The authentication method (Wi-Fi encryption type) is recommended to be set to WPA2-Personal as the most secure.
3. Preliminary WPA key- this is the Wi-Fi password, enter the desired one, containing at least 8 characters, do not use Cyrillic and special characters.

Click "Apply" and wait for the wireless network settings to change.

If, when making these settings, you were connected to the router via a wireless connection, the connection with it will be terminated and you may see an error in the browser window. All you need to do is reconnect via Wi-Fi to the ASUS router, but with new parameters.

WiFi network - great way for organization home network. It can be connected not only mobile devices but also desktop computers. Thus, you can significantly reduce the number of wires in the house. However WiFi network has one drawback. It is available to anyone within the coverage area of ​​the access point. In order to minimize the risks associated with this, it is necessary to set a password for WiFi. In this article, we will talk about how to set a WiFi password on a D-Link router.

Step number 1. We go to the web interface.

Management of any router is performed through the so-called web interface. The web interface is a small site that is hosted on the router itself. Using this site, you manage the router and change all settings. Therefore, if you want to use a D-Link router, then you first need to log into the web interface.

To access the web interface, open any browser and enter . If you don't know what IP address your router is available on, then try 192.168.0.1 first, and then 192.168.1.1. In most cases, one of these IP addresses is used.

After you enter the IP address of the router in the address bar, you will see an authorization form for entering the web interface of the router. Here you need to enter the username and password from the router. Without these data, you will not be able to enter the web interface and set a password for WiFi.

At this stage, it often turns out that the user has forgotten or does not know the login / password from the router. If you also find yourself in a similar situation, then the following tips should help you:

• If you have not changed the username and password from the router, then you should try entering the standard username and password. In most cases, the following login / password pairs are used on D-Link routers: admin / admin, admin / password or user / user. Try them all, one by one.
• If your router was configured by another person, then contact him and ask for a password.
• As a last resort, you can reset the router settings. After resetting the settings, you will be able to log in to the web interface using the standard login and password. But, you need to consider that after resetting the settings, the router will have to be configured again.

Step number 2. Go to the section with WiFi settings.

So, after you have entered the correct username and password, the web interface of the router should open in front of you. Next, you need to go to the section with Wi-Fi settings. On D-Link routers, this section is called "SETUP - Wireless Settings". In some cases, in order to access the settings, you will additionally need to click on the "MANUAL WIRELESS NETWORK SETUP" button (see screenshot).

Step number 3. Change the "Security Mode" parameter.

After that, you will see a page for manually setting up a Wi-Fi network. If your router does not have a WiFi password set at all, then you need to start by changing the “Security Mode” setting from “None” to “WPA-Personal”. This parameter sets the way to secure the WiFi network. The "None" mode means that protection is disabled and no password is used. Whereas "WPA-Personal" provides optimal protection and allows you to set a password for Wi-Fi.

Step number 4. Set a password.

After changing the “Security Mode” parameter, we can set the WiFi password on our D-Link router. To do this, enter a new password in the "Pre-Shared Key" text field.

Once you've entered your new WiFi password, all that's left is to save the changes. To do this, click on the "Save Settings" button. Usually in the web interface D-Link routers, this button is at the top of the page.

That's it, you set the password to wifi router and D-Link. After rebooting the router, the changes will take effect and in order to connect to Wi-Fi, you will have to enter a new password.

The topic of this article is how to put a password on a WiFi network. Such networks are widespread. Almost every home already has wireless router or modem. But, the manufacturer does not install keys for connecting via wireless communication. This is done so that the buyer can freely enter the settings menu and set their own values.

It should be noted that after the purchase and the first connection to the interface, the manufacturer strongly recommends installing a new key to access the settings. On some models of routers, the user is not even given the right to choose. That is, you will definitely have to change your username and password. It is also recommended to make security settings.

So, how to put a password on a WiFi network. First, let's answer the question why this is necessary. The fact is that the access point, whether it is a router or a wireless modem, has a fairly large range. This suggests that not only you will be able to connect to the created group.

Very often this is used by attackers or just lovers of "freebies". But if you do not have unlimited Internet (a package of services from a provider), then such unauthorized guests can do much harm to you. In addition, you risk losing confidential data or getting a virus on your computer. Therefore, wireless equipment manufacturers strongly recommend setting strong passwords.

How to put a password on WiFi: Video

How to encrypt your home wifi network

So we come to the main question, how to put a password on private network WiFi. As you already know, routers, modems, or other devices with a wireless adapter are used to organize such groups. In this case, we will focus on routers. All security settings are set in the router settings. Therefore, to begin with, let's enter the device settings menu.

We will look at how to set a password for a WiFi Internet connection using the D-LinkDIR-615 router as an example. So, we connect to the device using a cable or wirelessly. Now you need to open a browser. Enter the IP address of your router in the address bar. In my case, the address is 192.168.0.1.

It is worth noting that this IP address is used in most cases. But, sometimes you can also find such ones - 192.168.1.1, or 192.168.2.1. As a rule, all the necessary data is indicated in the instructions for the device or on the router itself (carefully inspect the router from all sides).

How to easily find out the IP address of a WiFi router: Video

Press "Enter". Now the system asks for a username and password. Initially, the hardware manufacturer sets these values ​​- admin, admin, respectively. Press "OK" and get into the settings menu.

How to set a password for home WiFi here? Everything is very simple. At the bottom of the screen, you need to find and click the "Advanced Settings" button. After that, several additional windows will appear. We are interested in the "WiFi" section, in which you should enter the security settings.

In the window that opens, you can change only one parameter - network authentication. It is nothing but a type of encryption. The default value is "Open". This means that at the moment your network is not secure in any way. So, we need to choose the type of encryption. It is recommended to install WPA-PSKWPA2-PSKmixed as it is the most secure cipher and provides a high level of protection.

After that, a line will appear in which you need to enter the key. In some cases, the system automatically generates a secure code and offers it. You, in turn, can leave it or change it to your own. After that, click "Apply". That's it, now you know how to bet.

How to connect to a WiFi router: Video

But what if you use a modem and not a router? How to put a password on a wireless Internet WiFi modem? Everything is extremely simple. The fact is that the settings of the wireless router are absolutely identical to the parameters of the modem. These devices work in a similar way. Differences are only in the names of some sections. However, the principle of setting is the same.

Just like in the case of a router, you need to connect to the device and register the IP address in the browser. After that, enter your login and password (admin, admin) and get into the modem menu. Find WiFi settings here and open security options. Then everything is as described above. Now you know the answer to the question of how to put a password on a private WiFi network. This will increase the level of security and prevent unauthorized connections by intruders.

If it so happens that your WiFi router provides an insecure Internet access point, and you want your Internet to be used exclusively by you, then it will be useful to learn how to put a password on the WiFi router. Manufacturers such as: D-link, TP-Link, Zyxel and others. On the blog, I have already discussed this issue in several of my articles, but this article will differ in that I will not talk about one router model (as I did for an example), but several, and to be even more precise, it will talk about the most popular router manufacturers.

Of course, I will not be able to cover the large circle of manufacturers that we currently have, but after reading the article, I think you will definitely have an idea of ​​​​how to change the password for WiFi.

In order to protect your access point with a password, you need to configure the router by going to its settings. You will need to find out the IP address of the router in order to access its control panel.

How to find out the IP address of the router, login and password to configure it

The easiest way to find out the IP address of your router is to carefully inspect its case. Most often, the IP address is indicated on it. It may also contain a username and password that you will need to enter the control panel. In addition, the IP address, login and password can be specified in the manual for the router. You can also see them on the official website of the manufacturer.

Here is an example:

If the described methods did not help you or for some reason turned out to be difficult, then there is the most correct and accurate method for determining the address of the router. Go to Network and Sharing Center. You can do this by clicking on the tray icon in the Windows taskbar and clicking on the appropriate label.

Once in the network control center and public access, click on the left "Change adapter settings", thereby opening a list of available connections. Find " Local area network connection"(If your router is connected by cable) or" Wireless network connection"(If you are connected to the router via wireless, that is, WiFi) and right-clicking on the icon, select "Status ".

Then click Details. The router's IP address is listed next to the "IPv4 Default Gateway" line.

Attention! This method will help you when you can connect to your router via WiFi or cable. If you are only going to tune it, then this will not work for you!

If DHCP is not configured on the router, then read the articles that I gave above. There you will find out what needs to be done.

Now that we have found out the IP address of the wireless router, it's time to start configuring it. To do this, enter the IP address of the router in the address bar of the browser and press Enter. The login page for the router control panel will open, in which we will need to enter a username and password. More often these values both fields "admin". Manufacturers have options: admin and an empty password, user - user, administrator - administrator, administrator and an empty password.

But again, I want to remind you, so as not to guess, you can read this information in the technical documentation that comes with the router or carefully examine the router at the bottom of it. Once you have gained access to the control panel, you can now move on to the main part of our procedure, namely how to set a WiFi password.

TP-LINK

How to set a password for WiFi in TP-LINK: on the left in the menu, find the "Wireless" section, the "Wireless Security" subsection. In the main part, select "WPA-PSK/WPA2 PSK". In the "Wireless password" field, enter the desired password (at least 8 characters). Click the "Save" button and reboot the router.

Now you will need to enter a password to connect to your router.

ZyXEL

Having entered the control panel of the router, we find the section "Wi-Fi network" on the left and select the subsection "Security" in it. The Wi-Fi Security Settings window appears. Opposite the "Authentication" line, select "WPA-PSK / WPA2-PSK" from the drop-down list, and opposite the "Network key (ASCII)" line, enter the password we have invented. Click "Apply" and reboot the router:

D-Link

Above we have analyzed horizontal menus control, and now let's see the vertical from the manufacturers D-Link. How to set a password for WiFi in D - link: after opening the control panel, click "Wi-FI" and select "Basic settings":

In the window that opens, set the name of the network (SSID) and click "Change". This must be done if you have not used the WiFi function in your router. If your router has already distributed WiFi and you only need to set a password, then go to the “Security Settings” tab.

In this tab, you just set the password for WiFi. Select the encryption type "WPA2-PSK", in the line "PSK Encryption Key" enter your invented password to the access point. Click "Change" and reboot the router.

Note: in each case I told you to reboot the router after changing the password and this moment is sometimes very important for everything to go smoothly. Sometimes, when changing the settings in the router, overlays occur and in order for all the changes to be applied, just in case, it is better to restart the router. While this is optional, you should be aware of it.

It happens that you did not buy a new router in the store, but took it from a friend or bought it second-hand. In this case, the default settings of the manufacturer can be changed in the router, that is, for example, the IP address, login and password for entering the router control panel can be changed. In this case, you need to reset the router settings to factory settings. How it's done?

Routers have a button on the back that is pressed with a thin object, such as a pin. With the router turned on, press and hold it down for 6-10 seconds. After that, the IP address will again become 192.168.1.1 or 192.168.0.1, the login and password will be set to "admin".

Important! Please note that all router settings will be reset, namely provider settings, passwords, access points, IP addresses, etc. Therefore, before performing a general reset, write down or remember everything that you may need.

We just figured out how to put a password on a Wi-Fi router. In principle, all actions are the same: find the tab with the wireless settings, and then enter your password in the appropriate field. The main thing is not to rush, and everything will be fine! But before you set a password for Wi-Fi in the router, you can see this password in Windows - this procedure is easier, so you don’t have to deal with IP addresses, logins and passwords. Read about this method at the links given at the beginning of the article.

Video with an example of how to set a password on WiFi:

Wi-Fi is a unique technology that provides wireless network access from any device (tablet, smartphone or computer). For this access to work smoothly, competent customization of the Wi-Fi network and the device that guarantees its operation - the router - is required. A router or router is a device that provides opportunities for the reliable functioning of a Wi-Fi network. In order for Wi-Fi to function stably and without failures, the router must be configured correctly. Brief instructions for setting up a wireless network and equipment -.

In the material presented to your attention, I will tell you how to set a password for a Wi-Fi router, as well as how to set a password for a Wi-Fi network so that unauthorized users cannot connect to your network and use Wi-Fi from their devices. It will be about ASUS router RT-N12E_B1, since the devices of this brand are quite popular in the user environment, they are reliable, easy to set up and available on the market.

How to set a password on an ASUS router with Wi-Fi access?

The first thing to do before setting a password is to connect the computer with which you plan to configure the router to the router itself using a wire. In this case, the cable from the provider is connected to the WAN port of the device, and the two-way PC cable is connected to the LAN port.

When the cable is properly connected, you first need to go to the page for configuring the settings of the router, where the access parameters to the provider are set. To know which address to go to this page, turn the device upside down and look at the bottom cover for the IP address that can be used to get to the settings web page. It also specifies the username and password that are used to log in by default.

As you can see, the specified IP address is 192.168.1.1. You can get to the web page for configuring the router under the login admin with password admin, but such authentication data is available on all Wi-Fi configuration devices without exception, so given password it is worth changing in any case in order to protect your router from hacking. Read more about which passwords to use.

So, let's go to the above address. As a result, we got to the device configuration web page. We go to the "Administration" section and there we go to the "System" tab.

As you can see, there is a field "Change router password". This is where we can change the password for our device by entering the updated value in the " New password" field and confirming it in the "Re-enter new password" field.

So we changed the password. Now you need to apply the changes and save them to the device. Scroll to the bottom of the page and find the "Apply" button. We click it.

Ready. The device will now reboot for the changes to take effect. Log in with a new password.

How to set a password for Wi-Fi on a router?

A Wi-Fi network, like a router, needs to be administered. It is worth choosing the most optimal channel for it, installing gateways and DNS servers, and, of course, also putting a password on it for the sake of security. Below I will tell you how to put a password on a Wi-Fi network.

We go to the "Wireless Network" section and stay on the first tab, called "General". In the SSID field, specify the name of the wireless network, which will be visible in the list of networks on your device. Another fairly important field is "Authentication Method". Here we specify the security method that will be applied to your network. At home, it would be most advisable to stop at the WPA2-Personal protocol, since it provides a simple authentication procedure and is also quite reliable and stable.

The password itself is set in the "WPA Shared Key" field. Come up with a value that isn't too easy for a cracker to include uppercase and lowercase letters and interspersed with numbers. If it is difficult for you to choose such a key yourself, use one of the online services for random generation of proleys, which abound on the network.

How to set a Wi-Fi password on a D-Link router?

On devices of any other models, the Wi-Fi password is set in exactly the same way. Consider the case of a D-Link router. These routers are used most often at home, along with TP-Link. This indicates the high quality of the device and its excellent regional adaptation for the domestic market.

We log in using the IP address indicated on the bottom of the device. By default, as on ASUS routers, the word “admin” is used for authentication as a password and login.

If someone has already set up your device (for example, a computer wizard), it is quite possible that this pair of values ​​\u200b\u200bis not suitable. Under such circumstances, you need to find out from the person who set up your device what password he set. If this is not possible, all router parameters can be reset by pressing the RESET button on the rear panel of the device with a pen (by pressing and holding for 5-10 seconds, then release and wait about a minute). If you decide to perform a reset, it is important to know that all settings will fail, and the Internet will have to be configured from scratch.

On different firmwares of D-Link routers, the interface varies greatly, but I will mean that you have firmware version 1.4.x or later. At the bottom of the configuration form, click on the "Advanced Settings" option, and then in the Wi-Fi section, click on the "Security Settings" category.

Here, in the "PSK Encryption Key" field, enter the actual key with which you would like to protect your Wi-Fi connection. After that, click on the "Edit" button at the bottom right. Now we get to the next settings page, where we will be asked to save the changes. We click "Save", - and voila: everything is ready.

Good afternoon dear readers. In this article I will tell you how to put a password on a D-Link wi-fi router. Setting a password for wireless Internet (wi-fi) is necessary primarily for security and restricting access to your Internet for other users. A wireless connection is less secure than a wired one. Therefore, if you do not have a wi-fi password set, then anyone can access the Internet through you, as well as gain access to your information.

So let's get started setting a password on a wi-fi router D-Lin. In order to set a password for wi-fi, follow these steps.

First of all, we need to go to the settings of our router.

Step 1 . Open a browser on your computer. In the address bar, enter 192.168.1.1 . This is the address to set up your wi-fi router.



Step 2 . Next enter the word admin in the field Username Password . Click Login to enter the main menu of the router.

Step 3 . If you entered correctlyUsername password , then you will be taken to the main menu of the router. In the right part of the window Select a section WiFi by clicking on the left mouse button once. In the drop-down menu, click on the linkSecurity Settings

Now almost every family has several Internet users, and in their apartment or house they connect devices to the network via a Wi-Fi router. Initially, no one really thought about how to set a password for WiFi, since there were few such devices and it was not important. Now, many phones, not to mention smartphones, tablets and laptops / netbooks, have a WiFi block, and everyone strives to use the free Internet. Let's resist this!

The point is not even that you feel sorry for distributing, for example, your traffic to your neighbors. The problem is that these neighbors, if they wish, can excommunicate you from their own Internet by putting a code at the entrance, and with good knowledge of technology, they can seriously harm your computer.

So the WiFi password? This is not at all difficult if you have everything set up and working and only the desired code is missing. You need to start by logging in. Regardless of the router model, enter http://192.168.1.1 or 192.168.10.1 into the browser line. A window will appear asking you to enter your username and password. If you haven't changed anything, it will be admin in both cases. We type and find ourselves in the device parameters. Now we will perform the following task: so that he requires digital permission from everyone who enters.

The general design of the settings section may differ slightly from different models, but the system itself, the essence, remains the same. We are looking for the wireless item, one of the options for the path to it: Inetrface setup > wireless. We are considering the English version of the menu and the lack of a book with instructions, since if there is a Russian menu, any "teapot" can set up WiFi.

We find Authentication Type there, select, for example, wpa-psk, or another type of encryption, look for the very place where, finally, you need to enter the password. We enter it - and everything, the job is done. We save the settings, and now no one, except for people who know the code, will connect to your Internet. When deciding how to set a WiFi password, try to make sure that it cannot be guessed or hacked by anyone. Think of a combination of numbers and letters no shorter than eight characters.

Pay attention to the name of your network. If it looks like others nearby, then change it in the SSID line. If it is still difficult for you to do all of the above, then invite a specialist or contact the technical support of your provider.

It also happens that the task of how to set a password on WiFi becomes noticeably more complicated if for some reason you did not manage to get into the router interface. In this case, you will have to reset all its settings. To do this, for a few seconds, you need to press the Reset button recessed on the rear panel with something.

Then, in the same way as described above, we go into its settings. In devices manufactured earlier, it was necessary to manually enter all the settings, having previously taken them from the provider, and partly from the network settings of the computer. Modern routers allow access to the Internet almost automatically by pressing just a couple of buttons. There are not so few of their models, there are also many providers, so the path to the network may differ. You can learn it from the latter, or by typing the appropriate query in the search engine. Do not forget only after the completion of the connection process the password itself!

Good day!

- Why does my Internet slow down every evening, I can’t download anything, and pages open for a long time? - one friend asked me once.

The next day, looking at his Internet settings, programs, router, etc., I was surprised only by one thing: his home Wi-Fi network was not password protected (it simply did not exist). Oddly enough, by setting a password, the brakes and lags of the Internet stopped, and in the evening the Internet began to work as expected. Apparently, there were some neighbors who successfully used his Internet channel, just in the evenings everyone comes from work / from school, etc.

In general, I will give one piece of advice: in any case, if you have any suspicions, change the password for the Wi-Fi network. If you don't have it at all, be sure to install it (even if you have a very fast unlimited Internet).

In this article, we will look at how this is done.

Important! You also need to change your Wi-Fi password because those who connect to your network will use the Internet under your IP address. In principle, if they only occupy your Internet channel, this is not so scary.

But just imagine, suddenly they will commit illegal actions - the first to whom they will come will be you (most likely)! I think it is not necessary to explain that it is better to avoid such visits? Therefore, the PASSWORD is required!

To change the password for accessing a Wi-Fi network, you need to do something like this:

• go to the settings of the Wi-Fi router;
• then open the tab / section for setting up a wireless network (also called Wireless or Wi-Fi);
• in this tab select certificate of safety, encryption type, and password to access the network.

In general, everything is quite simple. Before moving on to specific models of routers and their configuration, I will dwell on several important parameters (voiced above).

Certificate of safety

The most popular security certificates found in almost every router are WEP, WPA-PSK, and WPA2-PSK. To date, the best security is provided by the WPA2-PSK certificate, which I recommend choosing.

If devices that do not support WPA2-PSK will connect to the Wi-Fi network, then stop at the WPA-PSK option (some routers have WPA / WPA2-mixed mixed mode).

By the way, some inexpensive router models may not work stably and break the connection when WPA2-PSK is selected. In this case, try to limit the speed of work in the router, as well as change the security certificate.

Encryption type

Closely related to the security certificate. If you choose WPA, the Temporary Key Integrity Protocol (TKIP) is used, if you use WPA2, the secure AES standard is used. This is exactly what I recommend to avoid. If you choose a setting other than this, you may experience problems connecting devices to your network.

Password selection

Here, perhaps, I will only say the most basic thing that I think about his choice. I noticed that many users put very simple passwords, like: 11111111, 2222222, 11111122222, etc. Such passwords are very quickly selected and cracked.

It is unlikely, of course, that someone will deliberately and for a long time pick up a password for your home Wi-Fi network (especially since the vast majority of them do not contain any valuable data), and nevertheless I will give a couple of tips on how it should be password:

At least 8 characters;

It is advisable to use both letters (Latin) and numbers (of course, some will also say special characters - but in my opinion it’s not worth it, it’s too dreary to type them on your phone or tablet when connected to the network);

Do not use your own names, standard words (password, admin, computer, etc.), the most famous dates, etc.

Now let's move on to specific models of routers. So...

You may find the article on how to enter the router settings useful. In some cases, this does not work (link is given below) ...

How to log in to 192.168.1.1: entering the router settings -

D-Link

One of the most popular brands of routers in our country. There are a fairly large number of models, but there are not so many firmwares that differ from each other (at the root), 3-4 pieces. In this article I will give several variations of them, and first a few important parameters.

IP address (default) to enter settings: http://192.168.0.1

(preferably use Internet browser explorer)

Login(default): admin

Password(default): either an empty string, or the same admin.

In older router models (such as DIR-300, DIR-320, DIR-615, DIR-651), as a rule, the firmware is not translated into Russian and is presented in such an orange-gray design. To change the password, you need to go to the router settings (if you can’t log in, then a little higher in the article there is a link to instructions for solving the problem) , and open section "Setup/Wireless setup".

At the bottom of the window in the column Network Key enter your password (see the screen below), by the way, they also set security certificate, and encryption type(what it is - see above in the article). After the entered settings, save them - button Save Settings.

DIR-300 - password setup // Setup/Wireless setup

By the way, there is a similar firmware in Russian translation, it is configured in the same way.

For router models DIR-300 NRU and DIR-320 NRU(firmware version 1.2) the settings page looks a little different: a nice white background, all the main settings sections are presented on the left side. We open "Wi-Fi/Security Settings" , and install:

1. network authentication: WPA-PSK (for example);
2. PSK encryption key: this is your password;
3. WPA encryption: TKIP+AES.

For D-Link DIR-620/DIR-320 NRU routers in firmware versions 1.3 and 1.4, the interface is somewhat different: when you go to main screen, you see a gray background and tiles (as in Windows 8) that display the main settings sections.

To change the password, you need to open the "Wi-Fi / Security Settings" section (number 1 on the screen below), and then enter:

1. network authentication: WPA2-PSK (for example);
2. Encryption key - enter a password;
3. WPA encryption - AES (see screenshot below).

Router from Rostelecom (Sagemcom)

In general, with routers from Rostelecom, as a rule, there are no big problems - everything works as expected. Yes, and when you connect the Internet, you will be given a password and everything will be set up. The firmware in routers is completely in Russian, so there are usually no questions about setting it up.

Address to enter settings: http://192.168.1.1/

Default password and login: admin

Browser: almost any: Opera, Firefox, IE, Chrome, etc.

To set a password, open the section "WLAN Setup/Security" . Further in the subsection "Manual setting access points" select:

1. Authentication - WPA2-PSK;
2. WPA/WAPI password - specify your password;
3. Encryption WPA/WAPI - AES;
4. next click the button "Apply/Save" (screenshot below).

Actually, that's the whole setup ...

Tp Link

One of the largest manufacturers of routers, tens of millions of people around the world use their products. In our country, their routers are also very popular, and they do a pretty good job with Russian networks (they work with almost all Internet providers).

IP address to enter settings: 192.168.1.1 (on rare occasions 192.168.0.1 , depending on the firmware version);

Username:admin;

Password: admin (type without dots, commas, etc.).

Most often you have to deal with the so-called "green" firmware. It is found in routers: TP-LINK TL-WR740xx, TL-WR741xx, TL-WR841xx, TL-WR1043ND(45ND), etc. Approximately 50/50 firmware is in English / Russian.

The screenshot below shows the English version: to change the password, you need to open the section "Wireless/Wireless Security" , then choose WPA/WPA2-Personal and put:

• Version - Automatic (Recommended);
• Encryption - Automatic (Recommended);
• enter the password on the line PSK Password .

TP-Link ("green" firmware)

Almost identical actions will need to be done in the Russian version of the "green" firmware: open the section "Wireless Security" , then set PSK password(see number 3 on the screen below).

TP-Link "green" firmware (Russian version)

It is also quite common to find a "blue" version of the firmware in TP-Link routers(for example, TP-LINK WR340G, TP-LINK WR340GB and other similar models).

Their setup is almost identical:

1. first open section "Wireless Settings" ;
2. in the column Security Type install WPA-PSk/WPA2-PSK;
3. Security Option- set Automatic;
4. Encryption- install Automatic;
5. PSK Passphrase- this is the password (somewhat different spelling than in other firmware versions). It must then be specified wireless connection to the router.

TP-Link "blue" firmware

After the settings have been made, save them (button Save on the screen above, see number 3).

TRENDnet

The access parameters are relevant provided that the router has factory settings and its IP has not changed.

IP address to enter settings: http://192.168.10.1

User Name (login): admin

Password (access password): admin

In general, TRENDnet routers most often have 2 firmware versions: blue and gray (both in Russian and in English).

To configure security and set a password in the "blue" firmware, for example, the TRENDnet TEW-432BRP router, you must do the following:

1. open section Wireless/Security ;
2. in field Authentication Type select WPA;
3. in field PSK/EAP select PSK;
4. in field Cipher Type select Auto;
5. in field Passphrase and Confirmed Passphrase enter your password and click apply(screen below).

In the "gray" version of the firmware (for example, as in the TRENDnet TEW-651BR router), the actions are performed in a similar way, even the menu items are located in the same places.

Asus

IP address (web interface): 192.168.1.1

In the authorization lines, type login: "admin", password: "admin" (enter without quotes!). Browser preferably IE (although modern versions of the web interface work well with all popular versions of browsers Firefox, Chrome, Opera, etc.).

Most often, ASUS routers have two firmware: "blue" and "black" (moreover, they usually come localized in Russian).

To change the password in ASUS RT-N10E, RT-N10LX, RT-N12E, RT-N12LX routers, etc. (this is with "blue" firmware), you need to open the section "Advanced settings / Wireless network / General tab" .

In the graph "WPA preshared key" enter your password and save the settings.

ASUS // "blue" firmware

In ASUS RT-N10P, RT-N11P, RT-N12, RT-N15U, RT-N18U routers, the firmware (in terms of setting the password) differs only in color. It also needs to open a section "Wireless network" , tab "General". Then change the column "WPA Preshared Key", and save your settings.

ASUS // "black" firmware version

Zyxel

• IP address of the router on the network (web interface): 192.168.1.1
• Login: admin
• Password(default): admin

To change the password on the ZyXEL Keenetic of the first series, you need to go to the web interface, open the section "Wi-Fi network", tab "Safety" . Next, set the following parameters:

• Authentication- WPA-PSK/WPA2-PSK;
• Type of protection- TKIP/AES;
• Format network key - ASCII;
• Network key (ASCII)- set your password, which then will need to be specified when connecting wirelessly to the router.

Newer routers (for example, Zyxel Keenetic II: Start, Giga, Omni, Viva, Extra) have a slightly different firmware installed. To change the password in them, you need to select the section in the menu "wi-fi" and then select the tab (top) - "Access point" .

NetGear

• IP address to enter the router settings: 192.168.1.1
• Login: admin
• Password(default): password
• You can use almost any browser: for example, Internet Explorer, Mozilla Firefox, Opera, Safari, etc.

To change the password in NETGEAR routers (for example, model WNR2200): open the "Wi-Fi Setup" section, then set:

• Security options: select item WPA-PSK (TKIP) + WPA2-PSK (AES) ;
• Passphrase: enter your password (it will later be necessary to specify it when connecting wirelessly to the router).

In principle, in this short article I tried to consider all the most popular router models. If you have a different model from those given, the working technique will not change: first you need to find the IP address to enter the router settings (you can find it in the documents for the device, or on the manufacturer's website - to determine the characteristics of the PC).

Then, entering the router settings, open the Wi-Fi security section (or Wi-Fi settings) - then set the desired password and save the settings. Difficulties, most often, happen with entering the router settings: either the password does not fit, or the IP address is incorrect, or something else ...

I am finishing the article with this, adios amigo!