Error when receiving data from the Play Market server. How to fix? Why doesn't Google Play Market (Google Play Market) server error, there is no connection and says you need to log into your account What to do if the server gives an error

Internal server error is an HTTP protocol status class that means that the user's operation/request failed and the server itself is to blame.

More videos on our channel - learn internet marketing with SEMANTICA

You've run out of food. You need to go to the grocery store. There is a sign on the door - “Accounting”. You are without food.

The user wants to visit the site. A request is sent to the server. And if there are any problems on the server, then the person will see an error message in the browser window.

What are the server errors?

As we've learned, internal server errors constitute a class of HTTP statuses.

• . Indicates a wide range of server errors, if they do not belong to the following problems of the class in question.
• 501. Means that the server does not have the necessary capabilities to process the user request. Typically, a 501 error appears when the server cannot recognize the request method. If the server recognizes the request method, but it cannot be used on this Internet resource, error 405 is displayed (occurred due to the user’s fault).
• . Occurs when the server acts as a proxy or gateway. The error indicates that the upstream server is sending an invalid response.
• . Displayed when the site is unable to process user requests. This may be due to overload, maintenance problems, technical problems, and so on. Most often, when a 503 error is displayed, the Retry-After field indicates the time when the user needs to repeat the request.
• 504. Here again the server acts as a gateway or proxy server. It forwards the request to the upstream server, but does not wait for a response, and therefore cannot complete processing of the request.
• 505. Indicates that the request version is not supported by the server.
• 506. This means that the current version of the server has an incorrect configuration. In this regard, the binding process does not reach completion and is interrupted all the time.
• 507. There is no space on the server to complete the request and process it. Problems of this kind may be temporary and easily fixed.
• 509. If an Internet resource has spent all the traffic that was allocated to it, a this error. To resolve the problem, you need to contact your hosting provider.
• 510. This error can be encountered in cases where the client makes a request and wants to use a certain extension, but the server does not use and cannot provide this extension.
• 511. This error does not come from the server itself, which the user is accessing, but from an intermediary, which can be a provider. Typically, the problem occurs when the client needs to log in to global network(specify the password for the paid access point). In this case, a special field for authorization is displayed in the response form.
• 520. Indicates that there is an error, but the CDN server cannot correctly process the error and display it to the client.
• 521. Occurs in situations where the server rejects the content delivery network connection.
• 522. Displayed when the data communication system cannot connect to the server and is timed out waiting for a server response.
• 523. The server cannot be “reached”; when accessing the server, serious obstacles arise, overcoming which is currently not possible.
• 524. Connection time has expired between the required server and the content delivery network server.
• 525 If errors occur during the handshake between the server itself and the CDN server, code 525 is displayed.
• 526. Indicates that there is currently no way to validate the encryption certificate.

What to do if they write “Server error”

The listed errors usually arise due to the .htaccess file, themes and plugins. Let's consider options for solving the problem.

So, you liked the new theme and installed it. Everything would be fine, but then an internal server problem arises. To restore the server's functionality, select one of the following methods:

Via FTP

We go into it and look for a folder with themes. Open the folder and correct/delete the theme that is currently posted on the site. We go to the site and see a blank page without errors.

Open the WordPress admin panel, then the theme, and receive a notification that another theme has been activated. A little advice: do not delete standard themes, they serve as a standard and can be activated after the site is restored.

Via PhpMyAdmin

If you have deleted/edited the standard theme, you need to download and install it again. This can be done from the following resources: TwentyTen, TwentyEleven, TwentyTwelve. After downloading, open PhpMyAdmin, then the database.

Go to the SQL tab and copy the code below into it.

Please note that the topic name must be specified correctly. Then the site will work as usual.

If the problem is with plugins, the server does not work correctly and the site is displayed differently. At the same time, access to the console is preserved, which allows you to disable this or that plugin. Sometimes installed plugin may conflict with other plugins that are already installed and activated on the resource. Then it crashes and generates an internal error. You can disable the plugin in 3 steps:

1. Open the FTP resource.
2. Open the folder with existing plugins.
3. Delete/change the name/edit the plugin.

If the errors are problems with the .htaccess file, you need to do the following:

1. Open FileZilla, “Server” menu and check the box next to “Display hidden files forcibly." We update the list of files and find our .htaccess file.

2. Open the file through notepad/text editor. A text is displayed in front of you - a list of instructions and rules for the functioning of the web server. Review the file and correct any errors. An alternative option is to delete the file completely and then write using WordPress new file(open the admin panel, then “Options”, then “Permalinks”. Select the desired option, click “Save”).

If the above measures do not give the desired result, you must contact a qualified programmer.

As you can see, the list of errors is quite wide. If identified, they must be eliminated as early as possible.

Error 500 (Internal Server Error) is a fairly common occurrence on the Internet and is, for the most part, internal. Often this problem causes inconvenience to users who try to access the Gosuslugi.ru website. This especially happens during times of a massive influx of users trying to use the State Services portal with completely different everyday issues (enrolling a child in a school/clinic, paying traffic police fines, applying for a foreign passport, paying taxes, etc.).

Reasons for error 500

To fix this internal server error 500, you first need to find it, and then get ready to fix the problem. The 500 error itself indicates that requests were processed incorrectly. At the same time, internal problems prevent requests from being read and processed correctly, but the software is fully functional and works correctly.

It is important to remember that the 500 error is internal, and if it occurs on a specific site and does not apply to all portals, rest assured that you do not have the right to change anything yourself. The only correct solution is to wait until the administrator fixes all the problems.

There are also the following reasons for this problem:

• Incorrectly written cgi scripts;
• Using DNS, VPN, proxy server;
• Using plugins and extensions;
• Long script operation;
• Open or incorrect access rights;
• Problems with htaccess;
• There is not enough memory to run the code;
• Problems with WordPress;
• Problems with Joomla and other CMS.

Fixing error 500 if you are a regular user

If you go to the State Services website and see error 500, don’t be upset. Most likely, this is an internal temporary server failure and the administrator will resolve the difficulties very soon. But, sometimes the problem may be in your computer (browser, Internet connection or software). To troubleshoot, try the following:

1. Refresh page (CTRL+F5);
2. Disable or reinstall plugins and installed extensions in the browser.
3. Disable the web browser theme, or completely reinstall the browser (deleting the cache, cookies, etc.). The CCleaner program will help.
4. Change the country in the browser settings.
5. Use a proxy server or VPN.
6. Check DNS settings installed by your Internet provider, or, if you use online DNS, check them for viruses.
7. Wait for the technical work to be completed on the State Services website. This site is a government site, so you can call technical support.
8. Try logging into the portal via mobile app Public services, available for both Android and Apple.

It is worth noting that Internal Server Error 500 can be issued by individual sections of the portal, or during registration/recording. In this case, be sure to write to the chat located in the lower right corner.

Online support - chat

What should site administrators do?

Of course, administrators of State Services will not need further advice on correction, but ordinary owners of web resources will be helped. For advanced users (administrators):

1. You need to find the file in the root folder of the system "error log" and check it for functionality. You can also try setting access rights to the codes cgi-0755.
2. There are restrictions on the response time from the server, during which the script must have time to do certain work and complete it. We recommend setting a larger interval for the server. Use the necessary programs that have the ability to find slow sections of code in the script.
3. If incorrect values ​​are set for scripts and their access rights, the server will block them. Use software that allows you to change permissions on certain folders. For scripts, the most optimal value is 600. All other files should have permissions of 644, and directories - 755.
4. File ".htaccess", in case of structure violation, tends to issue incorrect (erroneous) directives.

To fix this problem, you need to find “.htaccess” in the system. After finding the file, you need to move it (preferably to another disk), or use backup and delete the file.

• During the massive influx of users to the State Services website, the hosting company noticed that some scripts wanted to use too much memory. Therefore, for such accounts, access was blocked and an error 500 was displayed. This can be corrected in one way - check the code for functionality, due to which the script consumes great amount memory.
• The simplest and most extreme measure is to disable WordPress. But this measure is still temporary, since when WordPress is disabled, some plugins may be lost.
• This problem is common among administrators who try to log into their profile in the Joomla admin panel. We recommend going to the error log (“logs”) and looking for “error.php”. Need to check this file for performance. Also, we recommend setting the access rights to 777. If all else fails, it is recommended to disable all existing plugins one by one.
• Order a virus scan of your files on your hosting from the experts. This happens very often - viruses simply “eat” some files.

If you can't solve this problem yourself, we recommend contacting support.

Conclusion

Typically, the 500 error is internal, and the average Internet user cannot do anything. All that remains is to wait for the problems to be fixed. Such technical difficulties on the State Services website are often resolved fairly quickly (within one day).

HTTP status code(English) HTTP status code) - part of the first line of the server response for requests via the HTTP protocol. It is an integer with three decimal digits. The first digit indicates condition class . The response code is usually followed by an explanatory phrase separated by a space. English language, which explains to the person the reason for this particular answer. Examples:

• 201 Created.
• 401 Unauthorized.
• 507 Insufficient Storage.

The client learns from the response code about the results of its request and determines what actions to take next. The set of status codes is a standard and they are described in the corresponding RFCs. New codes should only be introduced after agreement with the IETF. However, there are two codes known to be used that are not mentioned in the RFC: 449 Retry With. Also mentioned is the explanatory phrase “Reply With” in the specification for WebDAV V Microsoft Developer Network, introduced Microsoft and 509 Bandwidth Limit Exceeded, introduced in cPanel.

The client may not know all status codes, but it must respond according to the class of the code. There are currently five classes of status codes.

Web server Internet Information Services In its log files, in addition to standard status codes, it uses subcodes, writing them with a dot after the main one. At the same time, this subcode is not placed in responses from the server - the server administrator needs it so that he can more accurately determine the sources of problems.

Review list

Below is an overview list of all response codes described in this article:

Diagram of web server decision making based on headers

Statistics on response codes generated by the log analyzer Webalizer

• 1xx: Informational:
  • 100 Continue (“continue”);
  • 101 Switching Protocols;
  • 102 Processing (“processing in progress”).
• 2xx: Success (successfully):
  • 200 OK (“good”);
  • 201 Created (“created”);
  • 202 Accepted (“accepted”);
  • 203 Non-Authoritative Information (“information is not authoritative”);
  • 204 No Content;
  • 205 Reset Content;
  • 206 Partial Content;
  • 207 Multi-Status;
  • 226 IM Used
• 3xx: Redirection:
  • 300 Multiple Choices;
  • 301 Moved Permanently;
  • 302 Moved Temporarily;
  • 302 Found (“found”);
  • 303 See Other (“see other”);
  • 304 Not Modified (“not changed”);
  • 305 Use Proxy (“use proxy”);
  • 306 - reserved(code used only in early specifications);
  • 307 Temporary Redirect
• 4xx: Client Error:
  • 400 Bad Request (“bad, incorrect request”);
  • 401 Unauthorized (“not authorized”);
  • 402 Payment Required;
  • 403 Forbidden;
  • 404 Not Found("not found");
  • 405 Method Not Allowed;
  • 406 Not Acceptable;
  • 407 Proxy Authentication Required (“proxy authentication required”);
  • 408 Request Timeout (“timed out”);
  • 409 Conflict;
  • 410 Gone (“deleted”);
  • 411 Length Required;
  • 412 Precondition Failed (“condition is false”);
  • 413 Payload Too Large
  • 414 URI Too Long (“URI is too long”);
  • 415 Unsupported Media Type
  • 416 Range Not Satisfiable
  • 417 Expectation Failed
  • 418 I’m a teapot (“I am a teapot”)
  • 422 Unprocessable Entity
  • 423 Locked;
  • 424 Failed Dependency;
  • 425 Unordered Collection;
  • 426 Upgrade Required;
  • 428 Precondition Required;
  • 429 Too Many Requests;
  • 431 Request Header Fields Too Large
  • 444 Closes the connection without sending a response header. Non-standard code;
  • 449 Retry With;
  • 451 Unavailable For Legal Reasons
• 5xx: Server Error:
  • 500 Internal Server Error;
  • 501 Not Implemented;
  • 502 Bad Gateway (“bad, erroneous gateway”);
  • 503 Service Unavailable (“service unavailable”);
  • 504 Gateway Timeout (“gateway is not responding”);
  • 505 HTTP Version Not Supported (“HTTP version is not supported”);
  • 506 Variant Also Negotiates (“variant also negotiates”);
  • 507 Insufficient Storage (“storage overflow”);
  • 508 Loop Detected (“infinite redirection detected”);
  • 509 Bandwidth Limit Exceeded (“channel bandwidth has been exhausted”);
  • 510 Not Extended (“not extended”);
  • 511 Network Authentication Required
  • 520 Unknown Error
  • 521 Web Server Is Down (“the web server is not working”);
  • 522 Connection Timed Out (“connection is not responding”);
  • 523 Origin Is Unavailable;
  • 524 A Timeout Occurred (“revival time has expired”);
  • 525 SSL Handshake Failed
  • 526 Invalid SSL Certificate

Description of codes

Information

This class contains codes that inform about the transfer process. When working through protocol version 1.0, messages with such codes should be ignored. In version 1.1, the client must be prepared to accept this class of messages as a normal response, but the server does not have to send anything. The messages themselves from the server contain only the start line of the response and, if required, a few response-specific header fields. Proxy servers must send such messages further from the server to the client.

• 100 Continue - the server is satisfied with the initial information about the request, the client can continue sending headers. Introduced in HTTP/1.1.
• 101 Switching Protocols - the server offers to switch to a protocol more suitable for the specified resource; The server must indicate the list of proposed protocols in the Upgrade header field. If the client is interested in this, then he sends a new request indicating a different protocol. Introduced in HTTP/1.1.
• 102 Processing - the request has been accepted, but it will take a long time to process. Used by the server to prevent the client from dropping the connection due to a timeout. Upon receiving such a response, the client must reset the timer and wait for the next command as usual. Appeared in WebDAV.

Success

Messages of this class inform about cases of successful acceptance and processing of a client request. Depending on the status, the server may also transmit the headers and body of the message.

• 200 OK - successful request. If the client requested any data, it is found in the header and/or body of the message. Introduced in HTTP/1.0.
• 201 Created - as a result of successful execution of the request, a new resource was created. The server can specify the addresses (there may be several) of the created resource in the body of the response, with the preferred address indicated in the Location header. The server is recommended to indicate in the response body the characteristics of the created resource and its address; the format of the response body is determined by the Content-Type header. When processing a request, a new resource must be created before sending a response to the client, otherwise a response with code 202 should be used. Introduced in HTTP/1.0.
• 202 Accepted - the request was accepted for processing, but it was not completed. The client does not have to wait for the final transmission of the message, as a very long process can begin. Introduced in HTTP/1.0.
• 203 Non-Authoritative Information - similar to response 200, but in this case the information transmitted was not taken from the primary source ( backup copy, another server, etc.) and therefore may not be relevant. Introduced in HTTP/1.1.
• 204 No Content - the server successfully processed the request, but the response contained only headers without the message body. The client does not have to update the content of the document, but can apply the received metadata to it. Introduced in HTTP/1.0.
• 205 Reset Content - the server obliges the client to reset the user-entered data. The server does not transmit the body of the message and it is not necessary to update the document. Introduced in HTTP/1.1.
• 206 Partial Content - the server successfully completed a partial GET request, returning only part of the message. In the Content-Range header, the server specifies the byte ranges of the content. When working with such responses, special attention should be paid to caching. Introduced in HTTP/1.1. ( more details...)
• 207 Multi-Status - the server transmits the results of several independent operations at once. They are placed in the message body itself as an XML document with a multistatus object. It is not recommended to place statuses from the 1xx series in this object due to meaninglessness and redundancy. Appeared in WebDAV.
• 226 IM Used - the A-IM header from the client was successfully received and the server returns the content taking into account the specified parameters. Introduced in RFC 3229 to extend the HTTP protocol with delta encoding support.

Redirection

Codes in this class tell the client that in order for the operation to succeed, another request must be made, usually to a different URI. Of this class, five codes 301, 302, 303, 305 and 307 relate directly to redirects. The address to which the client should make the request is indicated by the server in the Location header. However, it is possible to use fragments in the target URI.

According to the latest standards, a client can redirect without a user request only if the second resource is requested using the GET or HEAD method. Previous specifications stated that to avoid round trips, the user should be asked after the 5th consecutive redirect. For all redirects, if the request method was not HEAD, then a short hypertext message with the target address should be included in the response body so that in case of an error the user can make the transition himself.

HTTP developers note that many clients, when redirecting with codes 301 and 302, mistakenly apply the GET method to the second resource, despite the fact that the request to the first was with a different method (most often PUT). To avoid misunderstandings, codes 303 and 307 were introduced in version HTTP/1.1 and it is recommended to use them instead of 302. You need to change the method only if the server responded with 303. In other cases, make the next request with the original method.

The behavior of clients with various redirections is described in the table:

Response Status Caching If the method is not GET or HEAD

• 300 Multiple Choices - for the specified URI, there are several options for providing the resource by MIME type, by language, or by other characteristics. The server sends a list of alternatives with the message, allowing the client or user to make a choice automatically. Introduced in HTTP/1.0.
• 301 Moved Permanently - The requested document has been permanently moved to the new URI specified in the Location field of the header. Some clients behave incorrectly when processing this code. Introduced in HTTP/1.0.
• 302 Found, 302 Moved Temporarily - the requested document is temporarily available at another URI specified in the header in the Location field. This code can be used, for example, in server-driven content negotiation. Some[ which?] clients behave incorrectly when processing this code. Introduced in HTTP/1.0.
• 303 See Other - a document at the requested URI must be requested to the address in the Location field of the header using the GET method, even though the first one was requested using a different method. This code was introduced along with the 307 to avoid ambiguity, so that the server could be sure that the next resource will be requested using the GET method. For example, a web page has a text input field for quick navigation and search. After entering the data, the browser makes a request using the POST method, including the entered text in the message body. If a document with the entered name is detected, the server responds with code 303, indicating its permanent address in the Location header. Then the browser is guaranteed to request it using the GET method to obtain the content. Otherwise, the server will simply return the search results page to the client. Introduced in HTTP/1.1.
• 304 Not Modified - the server returns this code if the client requested a document using the GET method, used the If-Modified-Since or If-None-Match header and the document has not changed since the specified moment. In this case, the server message should not contain a body. Introduced in HTTP/1.0.
• 305 Use Proxy - a request to the requested resource must be made through a proxy server, the URI of which is specified in the Location field of the header. This response code can only be used by origin HTTP servers (not proxies). Introduced in HTTP/1.1.
• 306 (reserved) - the previously used response code is currently reserved. Mentioned in RFC 2616 (HTTP/1.1 update).
• 307 Temporary Redirect - the requested resource is available for a short time at another URI specified in the Location field of the header. The request method (GET/POST) is not allowed to be changed. For example, a POST request must be sent to a new URI using the same POST method. This code was introduced along with 303 instead of 302 to avoid ambiguity. Introduced in RFC 2616 (HTTP/1.1 update).

Client error

The 4xx code class is intended to indicate errors on the client side. When using all methods except HEAD, the server must return a hypertext explanation to the user in the body of the message.

• 400 Bad Request - the server detected a client request syntax error. Introduced in HTTP/1.0.
• 401 Unauthorized - authentication is required to access the requested resource. The response header must contain the WWW-Authenticate field with a list of authentication conditions. The client can repeat the request by including the Authorization field in the message header with the data required for authentication.
• 402 Payment Required - intended to be used in the future. Currently not in use. This code is intended for paid user services and not for hosting companies. This means that this error will not be issued by the hosting provider in case of overdue payment for its services. Reserved since HTTP/1.1.

The server returned a 403 error when trying to view the “cgi-bin” directory, access to which was denied.

• 403 Forbidden - the server understood the request, but it refuses to fulfill it due to restrictions on the client’s access to the specified resource. If HTTP authentication is required to access a resource, the server will return a 401 response, or a 407 response when using a proxy. Otherwise, the restrictions were set by the server administrator or web application developer and can be anything depending on the capabilities of the application being used. software. In any case, the client should be informed of the reasons for refusing to process the request. The most likely reasons for the restriction may be an attempt to access system resources of the web server (for example, .htaccess or .htpasswd files) or files to which access was denied using configuration files, a requirement for non-HTTP authentication, for example, to access the system content management or section for registered users, or the server is not satisfied with the client’s IP address, for example, when blocking. Introduced in HTTP/1.0.
• 404 Not Found is the most common error when using the Internet, the main reason is an error in spelling the address of the Web page. The server understood the request, but did not find a corresponding resource at the specified URL. If the server knows that there was a document at this address, then it is advisable for it to use the code 410. The response 404 can be used instead of 403 if it is necessary to carefully hide from prying eyes certain resources. Introduced in HTTP/1.0.
• 405 Method Not Allowed - the method specified by the client cannot be applied to the current resource. In the response, the server must indicate the available methods in the Allow header, separated by a comma. The server must return this error if the method is known to it, but it is not applicable specifically to the resource specified in the request; if the specified method is not applicable on the entire server, then the client must return code 501 (Not Implemented). Introduced in HTTP/1.1.
• 406 Not Acceptable - The requested URI cannot satisfy the characteristics passed in the header. If the method was not HEAD, then the server must return a list of acceptable characteristics for this resource. Introduced in HTTP/1.1.
• 407 Proxy Authentication Required - The response is similar to the 401 code, except that authentication is performed against a proxy server. The mechanism is similar to identification on the original server. Introduced in HTTP/1.1.
• 408 Request Timeout - the server’s waiting time for transmission from the client has expired. The client can repeat a similar previous request at any time. For example, this situation may arise when uploading a large file to the server using the POST or PUT method. At some point during the transfer, the data source stopped responding, for example, due to damage to the CD or loss of communication with another computer on the local network. While the client does not transmit anything, waiting for a response from it, the connection with the server is maintained. After some time, the server may close the connection on its end to allow other clients to make a request. This response is not returned when the client forcibly stops transmission at the user's command or the connection is interrupted for some other reason, since the response can no longer be sent. Introduced in HTTP/1.1.
• 409 Conflict - the request cannot be completed due to a conflicting access to the resource. This is possible, for example, when two clients try to change a resource using the PUT method. Introduced in HTTP/1.1.
• 410 Gone - the server sends this response if the resource used to be at the specified URL, but was deleted and is now unavailable. In this case, the server does not know the location of the alternative document (for example, a copy). If the server has a suspicion that the document can be restored in the near future, then better for the client pass code 404. Introduced in HTTP/1.1.
• 411 Length Required - For the specified resource, the client must specify Content-Length in the request header. Without specifying this field, you should not retry the request to the server using this URI. This response is natural for POST and PUT requests. For example, if files are downloaded at the specified URI, and the server has a limit on their size. Then it would be more reasonable to check the Content-Length header at the very beginning and immediately refuse the download, rather than provoke a meaningless load by breaking the connection when the client actually sends a message that is too large. Introduced in HTTP/1.1.
• 412 Precondition Failed - returned if none of the conditional header fields (If-Match, etc., see RFC 7232) of the request were fulfilled. Introduced in HTTP/1.1.
• 413 Payload Too Large - returned if the server refuses to process the request due to the size of the request body being too large. The server may close the connection to stop further transmission of the request. If the problem is temporary, it is recommended to include a Retry-After header in the server response indicating the time after which a similar request can be repeated. Introduced in HTTP/1.1. Previously called "Request Entity Too Large".
• 414 URI Too Long - the server cannot process the request because the specified URI is too long. This error can be triggered, for example, when the client tries to pass long parameters via the GET method rather than the POST method. Introduced in HTTP/1.1. Previously called "Request-URI Too Long".
• 415 Unsupported Media Type - for some reason the server refuses to work with the specified data type using this method. Introduced in HTTP/1.1.
• 416 Range Not Satisfiable - a range outside the resource was specified in the Range field of the request header and the If-Range field was missing. If the client passed a byte range, then the server can return the actual size in the Content-Range field of the header. This answer should not be used when passing multipart/byteranges[ source not specified 1964 days]. Introduced in RFC 2616 (HTTP/1.1 update). Previously called "Requested Range Not Satisfiable".
• 417 Expectation Failed - for some reason the server cannot satisfy the value of the Expect field in the request header. Introduced in RFC 2616 (HTTP/1.1 update).
• 418 I'm a teapot - This code was introduced in 1998 as one of the traditional IETF April Fool's jokes in RFC 2324, Hyper Text Coffee Pot Control Protocol. This code is not expected to be supported by real servers.
• 422 Unprocessable Entity - the server successfully accepted the request, can work with the specified type of data (for example, the body of the request contains an XML document with the correct syntax), but there is some kind of logical error due to which it is impossible to perform an operation on the resource. Introduced in WebDAV.
• 423 Locked - the target resource from the request is blocked from applying the specified method to it. Entered into WebDAV.
• 424 Failed Dependency - The implementation of the current request may depend on the success of another operation. If it is not completed and because of this the current request cannot be completed, then the server will return this code. Introduced in WebDAV.
• 425 Unordered Collection - used in the extension WebDAV Advanced Collections Protocol. Sent if the client specified the number of an element in an unordered list, or requested multiple elements in an order different from the server's.
• 426 Upgrade Required - the server indicates to the client the need to update the protocol. The response header must contain properly formed Upgrade and Connection fields. Introduced in RFC 2817 to allow transition to TLS over HTTP.
• 428 Precondition Required - the server indicates to the client the need to use condition headers in the request, like If-Match. Introduced in draft RFC 6585.
• 429 Too Many Requests - the client attempted to send too many requests in a short time, which could indicate, for example, an attempted DDoS attack. May be accompanied by a Retry-After header indicating after what time the request can be repeated. Introduced in draft RFC 6585.
• 431 Request Header Fields Too Large - The permissible length of headers has been exceeded. The server is not required to respond with this code; instead, it can simply reset the connection. Introduced in draft RFC 6585.
• 434 Requested host unavailable - The requested address is not available [ source not specified 1401 days].
• 449 Retry With - returned by the server if insufficient information was received from the client to process the request. In this case, the Ms-Echo-Request field is placed in the response header. Introduced by the corporation Microsoft For WebDAV. Currently at least used by the program Microsoft Money.
• 451 Unavailable For Legal Reasons - access to the resource is closed for legal reasons, for example, at the request of government authorities or at the request of the copyright holder in case of copyright infringement. Introduced in the IETF draft by Google, with the error code being a reference to Ray Bradbury's novel Fahrenheit 451. Was added to the standard on December 21, 2015.

server error

Example of 502 Bad Gateway error

Codes 5xx are allocated for cases of unsuccessful operation due to the fault of the server. For all situations other than using the HEAD method, the server must include in the body of the message an explanation that the client will display to the user.

• 500 Internal Server Error - any internal server error that is not included in the scope of other class errors. Introduced in HTTP/1.0.
• 501 Not Implemented - the server does not support the capabilities required to process the request. A typical response for cases when the server does not understand the method specified in the request. If the method is known to the server, but it is not applicable to this resource, then you need to return a 405 response. Introduced in HTTP/1.0.
• 502 Bad Gateway - the server, acting as a gateway or proxy server, received an invalid response message from the upstream server. Introduced in HTTP/1.0.
• 503 Service Unavailable - the server is temporarily unable to process requests for technical reasons(maintenance, overload, etc.). In the Retry-After header field, the server can specify the time after which the client is recommended to repeat the request. Although it may seem obvious to immediately break the connection during an overload, it may be more effective to set the Retry-After field to a large value to reduce the frequency of redundant requests. Introduced in HTTP/1.0.
• 504 Gateway Timeout - the server acting as a gateway or proxy server did not wait for a response from the upstream server to complete the current request. Introduced in HTTP/1.1.
• 505 HTTP Version Not Supported - the server does not support or refuses to support the HTTP protocol version specified in the request. Introduced in HTTP/1.1.
• 506 Variant Also Negotiates - As a result of an erroneous configuration, the selected variant points to itself, causing the binding process to be interrupted. Experimental. Introduced in RFC 2295 to complement the HTTP protocol with technology Transparent Content Negotiation.
• 507 Insufficient Storage - there is not enough space to complete the current request. The problem may be temporary. Introduced in WebDAV.
• 509 Bandwidth Limit Exceeded - used when a web platform exceeds its allotted limit on traffic consumption. In this case, the site owner should contact his hosting provider. At the moment, this code is not described in any RFC and is used only by the “bw/limited” module included in the hosting control panel cPanel, where it was introduced.
• 510 Not Extended - the server does not have the extension that the client wants to use. The server may additionally transmit information about extensions available to it. Introduced in RFC 2774 to add support for extensions to the HTTP protocol.
• 511 Network Authentication Required - this response is sent not by the server to which the request was intended, but by an intermediary server - for example, the provider's server - in case the client must first log in to the network, for example, enter a password for a paid Internet access point. It is assumed that the body of the response will return a Web authorization form or redirect to it. Introduced in draft RFC 6585.
• 520 Unknown Error, occurs when the CDN server was unable to handle a web server error; non-standard CloudFlare code,
• 521 Web Server Is Down, occurs when CDN connections are rejected by the web server; CloudFlare custom code.
• 522 Connection Timed Out, occurs when the CDN was unable to connect to the web server; CloudFlare custom code.
• 523 Origin Is Unreachable, occurs when the web server is unreachable; CloudFlare custom code.
• 524 A Timeout Occurred, occurs when the connection timeout between the CDN server and the web server expires; CloudFlare custom code.
• 525 SSL Handshake Failed, occurs when there is an error in the SSL handshake between the CDN server and the web server; CloudFlare custom code.
• 526 Invalid SSL Certificate, occurs when the web server’s encryption certificate cannot be verified; CloudFlare custom code.

Error when executing a server application: causes and methods of correction

Quite often, many users may see the message “An error occurred while executing the server application” on their monitor screen when performing some operations to open files. Let's try to look at several situations and understand what it is and how to get rid of such a scourge.

What is a "server application execution error"?

Among all the situations that lead to this type of problem, the most common is the problem of playing multimedia files. In this case, most often the server execution error occurs when trying to view a video.

As is known, standard Windows Media Player is far from ideal and does not always work correctly as a multimedia tool installed on the system by default. In addition, a different kind of situation may arise. This may be due, for example, to programs such as 1C, installation of MS Link Server 2013, etc. Only in this case the user receives a message like “Error executing the command.”

For obvious reasons and due to the complexity of the work latest programs, we will not consider them, but will focus on the components responsible for the correct opening of multimedia files.

Viruses and system recovery

If the user receives a message that a server application has run into an error, the first thing to do is to scan the computer system for viruses (some malware can cause such consequences).

If the check does not produce results even when using an independent portable antivirus with fresh databases, it is worth looking at exactly when the error first appeared, and then trying to roll back the system to its original state using a restore from any checkpoint that preceded this situation. It may very well be that this approach will help (especially if multimedia updates have recently been installed).

Problems with drivers, codecs and the DirectX platform

On the other hand, neither viruses nor updates may have anything to do with it. If suddenly the system reports that an error of this type occurred during an operation, it is very likely that, for example, the video accelerator drivers require updating or that the codecs and decoders used in a video file have a higher version than those installed on this computer.

As is already clear, these components simply need to be updated. For video cards, you can use the Task Manager, download the file with the latest driver version from the manufacturer’s official website manually, or update it using specialized utilities for automatic search and update.

The same applies to the codec and decoder package. Fortunately, today we can find the latest distribution of the same K-Lite package Codec Pack On the Internet it is not difficult. The only thing you need to pay attention to is the mandatory check with anti-virus software if it was not downloaded from an official source.

Often, a problem when an error occurs when executing a server application may also be due to the presence of an outdated DirectX versions. There is nothing easier than going to the official Microsoft website, downloading the latest DirectX release from there and reinstalling all its components.

Simple commands for troubleshooting

If the above methods do not help, and the error occurs again and again when running the server application, you will have to use the command line. You can call it from the standard “Run” menu by entering cmd in the field.

After a black window opens like old system DOS, you need to sequentially enter two commands regsvr32 jscript.dll and regsvr32 vbscript.dll, after each of them pressing the Enter key.

After this, a system reboot will be required. True, in some cases this may not give the desired result. Then you will need to enter the additional command sfc /scannow. In theory, in combination with the previous two, it should save the user from further errors and failures.

Problems with Windows Media Player

Now a few words about the “native” Windows player. As a rule, the error when executing a server application appears in it. And this doesn’t even apply to viewing. streaming video online, and even by simply opening a video file.

The simplest solution would be to install any other player, say, VLC Media Player or something like that. If the desired file opens with such a player without problems, then the problem really lies in the Windows Media Player. You can refuse it.

But if you are already a supporter of this program and do not want to change your preferences in any way, you can use another radical method. Not to mention updating the player, you will have to turn to the installed Windows components.

To do this, you need to use the Programs and Features section in the Control Panel (in older operating systems this is the Add and Remove Programs section), where there is a special menu for enabling and disabling system components. In the list of installed software, find Windows Media Player and uncheck the box next to it. We reboot the system, after which we go back to the same section and return the checkbox to its place. A reboot is required again.

With a very high degree of probability, we can say that this error will be eliminated, although, in principle, no one can say exactly how disabling and re-enabling the “native” player affects the correctness of its operation. It may very well be that the developers themselves are not aware of this.

Conclusion

So we looked at the most likely situations of server application execution errors, and indicated the main methods for correcting them. However, if an error occurs while executing the server application, these are not all the methods, because sometimes if there are failures in the “OS” itself, you may need to boot from the installation disk or flash drive, update other components, etc. We have given only the simplest options.

What does DNS error mean?

If you see a DNS error while using your computer or the Internet, remember that there is a problem with the settings. If this problem is not resolved, the user will not be able to visit the desired website.

What is DNS?

For a domain, DNS will be the name of the service and will help in gaining access to resources on the Internet. The goal is to translate the address the user enters into the browser. Translation is carried out from the language used into the computer language. This procedure helps the computer read and understand the address in order to open access to the site passing through the server.

What is a DNS error?

Error of this type for a particular website is mainly due to the lack of an active connection to the network. It also means that the equipment is not able to connect to the Internet to convert the entered address. For this reason, the computer is not able to visit the selected site.

Errors occur for certain reasons, and most often they can be easily resolved. Sometimes the device shows them only for certain resources. In this case, the address may be entered incorrectly or there may be no record of it on the network.

What should you pay attention to first?

If the server is not found due to a DNS lookup error, there may be no problem with your computer. For this reason, you should pay attention to the recommendations presented and use them.

• It is worth checking whether difficulties arise when trying to access one site or all. In the first case, the resource may undergo some changes or encounter operational problems. The user should wait or clear the DNS cache using the ipconfig /flushdns command in a special line as an administrator.
• If possible, you should check: the DNS error appears on one device used or on others as well. If all devices are affected, then the problem may be with the provider. In this case, you should wait until the problem is resolved.
• When connecting with using Wi-Fi The router must be completely turned off and restarted. The next time you try to access the site, the DNS server error will likely go away.
• When connecting to the Internet without using a Wi-Fi router, it is recommended to go to the list of connections on your computer. Next you need to turn off the local network and turn it on again.

It is worth understanding that after these manipulations the DNS error may remain. In such a situation, it is worth using other methods to correct it.

Using Google Public DNS

• You need to go to the list of device connections. The easy way To do this, press the Win+R key combination and enter the command ncpa.cpl.
• It is worth choosing the connection used to access the Internet. This is a high-speed connection PPPoE, L2TP or the local network. The required element is selected and the “Properties” item is clicked.
• The TCP/IPv4 protocol is selected among the components used by the connection.
• If the server is not found due to a DNS lookup error, it is important to check what settings are available in the DNS server settings. Upon receipt of an address in automatic mode It’s worth moving on to entering addresses. Then the values ​​8.8.8.8 and 8.8.4.4 are specified. Otherwise, you must first set it to receive automatically.
• After saving the settings, you should run the command line as an administrator and run ipconfig /flushdns.

Troubleshooting browser problems

Checking DNS connections is possible when using a different browser. To do this, download any web browser. At the moment there are a large number of them, and they are mostly provided free of charge. After the browser is open, you need to connect to the Internet. If the service is not found again due to a DNS lookup error, then there are no errors in the browser. This means there is a problem with other computer settings.

If there are no difficulties at all, the user should troubleshoot the old browser. Quite often they arise due to proxy settings. Accordingly, it is necessary to change them.

Cleaning and changing DNS

First of all, if a DNS error appears, you should clear the cache manually, since the setting becomes outdated over time. This can be done from command line. This procedure is simple, but it may not be effective. If the DNS connection error persists, you should change the service.

The user has the ability to independently enter an alternative DNS server to make a connection. To do this, go to the ncpa.cpl section and select active connection, and then go to Properties. You need to find the TCP/IPv4 network protocol entry, which is located in the “Network” tab. Then properties and the option to go to the server address are selected. In the Preferred DNS server field, the user must enter 208.67.222.222. Then in the Alternate DNS server field you need to enter 208.67.220.220. Newly created DNS servers will have public source.

Slow server response when using Google

In this case, an error in searching for a DNS server means that Googlebot is not able to contact it. This happens because it is not working or there is a problem with DNS routing for the user's domain. Most warnings and errors do not affect the functioning of the robot. Their occurrence can also be explained by a long reaction, which is an unpleasant moment for users.

The first thing you should do is make sure that Google is crawling your site. To do this, you should use the tool for the main page of the resource. Google will have access to the site if the user returns the content without defects. The DNS service may be provided by your web hosting provider or another company. It is worth contacting if a DNS error code appears probe finished or other.

The server can be configured for a site using wildcards so that it starts responding to requests for subdomains. This approach will be successful if the resource content can be created by users, and at the same time a separate domain is provided for each personal page. It's worth noting that in some situations this may result in duplicate content on hosts with different names. In most cases, this prevents the resource from being crawled by Googlebot.

Performing a virus scan on your computer

The previously discussed methods may not help. If the DNS error still appears on the screen, and it is not caused by factors that affect the computer externally, then you should scan it for viruses. The user may already have an antivirus installed on their device. It is recommended to use Kaspersky, and its free version will do. trial version. Bitdefender in a similar design would also be an excellent option.

The level of detection and the ability to effectively eliminate viruses, while restoring system parameters, are quite high in these antiviruses than in their analogues. In this case, it is worth using a full system scan. Using this method can be really useful if you cannot get rid of the problem in the browser itself.

Antivirus malfunction

It is worth paying attention to the fact that the antivirus itself in some cases can cause problems with connecting to the Internet. This can also be fixed. To carry out the procedure, “ Safe mode" In this case, the computer will restart, during which only the necessary ones will be loaded. operating system files. This will help determine whether the problem is caused by an antivirus or another program. To verify this, it is recommended to do the following:

• First of all, you should turn off your antivirus. If there are no connection errors, you should uninstall the antivirus and install a new one.
• Next, you need to reboot the device. While loading it, hold down the F8 key.
• You should select “Safe Mode with Networking” from the options provided.
• The connection is then checked. If you successfully connect to the network, you can conclude that the problem lies in the program that is currently running on the computer.

It is necessary to carefully study the startup files and disable programs until the faulty one is found.

Router

If the server is not found due to a DNS lookup error, it's worth looking at the router again. Rebooting it may not help in this case. In some situations, settings become damaged. The most correct and quick solution is to reset the device to default settings. As a result, the parameters will be reset wireless network. Along with them, the information transmitted through the port will disappear.

To complete the procedure, you must press and hold the Reset button, which is located on the back panel of the device. In this case, you may need a pointed object, such as a paper clip. Then you need to reconfigure the router. After resetting the device, you should change the wireless network settings, if used by the user. This will reset all administrator accounts and passwords. Making the settings is a simple procedure, but it requires care and correct actions. If the problem was in the router, then after the work done it should be completely resolved.

Additionally, there is a possibility that the router is completely faulty. If you can't reset it and reinstall it, you should contact your Internet provider. In this case, it will be possible to determine the cause of the difficulty connecting to the network. In addition, the procedure will be performed by a specialist.

The need to indicate the DNS of your hosting in the domain record

A name server is designed to assist in finding information about a specific site. By completing a record in their domain, the user will provide the Internet audience with information in the right direction that will lead to the right place.

If you leave the previous provider's data in the domain record, the user will be transferred to a server that no longer has the site. In this case, it will be impossible to access the site, since the provider has deleted the resource record from the DNS. Correct execution is quite important, and failure to follow the recommendations can lead to difficulties.

You should follow the steps described in the material if the server is not found due to a DNS error. The tips presented will be useful, because they help determine the cause of the problem and eliminate it in a timely manner. The information indicated above will become relevant for Internet users, since many of them are faced with the described difficulty. In addition, you can turn to specialists if you yourself cannot get rid of the problem that has arisen with gaining access to sites. This will be the most correct solution in this case.

What is an internal server error?

Vladislav!!!

An error is a discrepancy between two groups of objects, one of which is a standard (a grammatical rule, the correct answer to a problem, a solution that would lead to desired result), and the second - something that takes place in reality. Errors occur in all areas of human activity. Probability theory and statistics have been developed to analyze measurement errors. The inaccuracy of measurements in the microcosm is one of the principles of quantum mechanics. There are many historical examples in which mistakes led to catastrophic consequences. Many aphorisms are devoted to errors; they are interpreted by philosophers, poets, writers, historians and representatives of many other disciplines. Thus, many dialytic philosophers agree with the statement “they learn from mistakes.” Skeptics and agnostics believe that all our ideas are most likely erroneous.
It depends on the server error...
404 (Not Found or No Resource)
Indicates that there is no resource at this address.
405 (Method Not Allowed)
Indicates that a request method is not provided for this address.
406 (Not Acceptable or Invalid request)
Indicates that the request has no content objects matching the response.
407 (Proxy Authentication Required or Registration required on the proxy server)
Indicates that the client needs to be authenticated. Proxy-Authorization and Proxy-Authenticate are used.
408 (Request Timeout or Request processing time has expired)
This means that the request was not made within the time set by the server.
409 (Conflict)
Indicates that there is a conflict between the request and the state of the resource at the moment.
410 (Gone or Resource permanently deleted)
Indicates that the resource has been permanently deleted.
411 (Length Required)
Indicates that the server does not accept a request with an unspecified Content-Length. You must specify the correct Content-Length in the request header.
412 (Precondition Failed or Any precondition is not met)
Indicates that the server refuses to process the request due to exceeding its size limit.
413 (Request Entity Too Large)
Indicates that the server will not process the request due to its large size.
414 (Request-URI Too Long or The resource identifier in the request exceeds the maximum length)
Indicates that the requested address exceeds the maximum length.
415 (Unsupported Media Type or this device type is not supported)
Indicates that the request object has a format different from the request format.
500 (Internal Server Error or Error inside the server)
Indicates that an internal failure occurred on the server while processing the request.
501 (Not Implemented or There is no implementation of this function)
Indicates that the function requested by the client is not supported by the server or the server cannot recognize the request method.
502 (Bad Gateway or Poor Gateway)
Indicates that there was a failure on the server that is used as the gateway.
503 (Service Unavailable)
Indicates that any of the server services are currently unavailable.
504 (Gateway Timeout or Gateway Timeout Expired)
Indicates that the gateway has exceeded the maximum time limit.
505 (HTTP Version Not Supported or This version HTTP is not supported)
Indicates that the HTTP version specified in the request is not supported by the server.

User deleted

500. Internal Server Error (Russian: Internal server error) - any internal server error that is not included in the scope of other errors of class 5xx. The server is unable to complete a valid request, or does not support requests of the specified type.
Look at: http://ru.wikipedia.org/wiki/HTTP_404#404

What does it mean: Error: HTTP 500 - internal server error?

I can't get to the site. The browser shows:

Error: HTTP 500 - Internal server error

What does it mean? Is this the end of the site?

Galina Vasilna

Codes starting with 5XX mean that the request was completed correctly, but the server is currently unable to cope. When they don't open for a while, the browser should respond. Each browser responds differently. I have a Yandex browser, it most often asks, should I wait or close? But sometimes it shows "error no...."

There are many server response codes, their meanings are different. The simplest thing is to try refreshing the page by pressing F5. Quite often this resolves the issue. You can ask what this or that code means, it’s here

You can try to solve the issue this way:

Or here is another version of the explanation, which is more suitable for whom:

Foxanoreth

This is an internal server problem, and you definitely won’t be able to solve it from the side of an ordinary third-party user. You should wait a little, for example about half an hour, while doing other things, and then try to contact the server again later.

Hello! Not long ago my site went dark and the message appeared on the screen - 500 internal server error. As a person already more or less experienced in these matters, I quickly restored everything, immediately found the cause and eliminated it. It is important to always be aware of what you are doing, whether you understand what you are doing, whether you have enough necessary information, etc.

Of course, all this does not come immediately, but with experience and for this you need to constantly learn and practice. And you must understand that the site does not just go down. Before the site goes dark, certain actions occur, you or someone else makes some changes to the site. It is these actions that become decisive. Here is a list of the main and most common reasons causing the 500 error:

500 internal server error

– You have made some changes to the source code of the site, most often this is done out of ignorance and thoughtlessly. Something was accidentally deleted or the wrong thing was added, or part of the code was accidentally hooked.

– You have added any code to the htaccess configuration file, which is located on the server. The htaccess file is a very common cause of the 500 error. Any wrong action performed in this file will instantly disable your site.

– You installed a plugin on the site that automatically made changes to the htaccess file. The same thing often happens, there are plugins that add certain code to the htaccess file. On WordPress these are popular plugins – All In One Seo Pack, Jetpack, Akismet, WP Super Cache, Yoast SEO, etc. The error may occur due to incompatibility.

– You installed a plugin on the site and it turned out to be incompatible with your site or with a separate part of it. This often happens on WordPress and the problem is resolved very quickly. You need to go to your hosting panel and delete the newly installed plugin.

– You installed a theme or template on your site that turns out to be incompatible with your site or with a separate part of it. The incompatibility may be due to an outdated version of your site or the template you are installing. Incompatibility can be caused by anything, since templates are created by different webmasters and using different approaches and styles. Any part of the code can cause conflict and incompatibility.

– The most common reason for a 500 error is when you yourself start messing with the site’s code and tinker with something, add, correct, try to change something, although you absolutely do not understand what you are doing. This is precisely the reason that is the most dangerous, if after this you still don’t remember where you climbed and what you changed.

– Engineering works hosting on a server that you were not warned about. This is also possible, but usually high-quality hosting companies warn their clients about upcoming technical work on the server. But it also happens that the hosting company itself cannot predict such events, since they unfold spontaneously due to server failures or doos attacks. This rarely happens on high-quality hosting.

How to identify a 500 error and quickly fix it

On each server, and this primarily concerns the Apache server, since it is the most common, there is an Error log file in which all site errors are recorded. After the site issues a 500 error, this error will immediately be displayed in the error log file and, most importantly, the reason for this error will be indicated. The location of the error will be indicated (file name and path to the file), and the line number in the file in which the error was made will be indicated.

Therefore, first of all, you need to go to your panel on cPanel hosting or any other panel. The path to the error log file basically goes like this: File Manager– Public html –. You need an error log file that is located in the root directory of your site, where all the main files of your site or CMS system are located.

Open this file for editing and modification; if the file does not open, then simply download it to your computer by double-clicking on it with the mouse. The file cannot be opened for editing if it has grown in size more than 1 megabyte, in which case you need to download it to your computer and that’s it.

Next, open the error log file on your computer using a notepad in regular txt format. Scroll the page to the very bottom, we are interested in the very last lines, which indicate today's date at that time. The line will indicate the location of the file where the error occurred and the line number in the file.

The screenshot shows a fragment of the error log file from a site using the WordPress CMS. Therefore, it immediately becomes clear that the error occurred due to the site’s theme, which is located at wp-content/themes/theme name/theme file in which the error occurred, on line 423 – the line number in the file where the error, conflict or incompatibility occurs .

Look at which section of your site and in which file the error occurred, so you can understand in which part of the site the error occurred and how to fix it.

– If the error is due to your theme or template, then it is very easy to solve. Open the folder containing all the themes or one theme and reinstall the theme. That is, you delete the theme, and then upload it again, having first downloaded it from the official website. You can only replace one theme file that is causing the error.

– If the plugin name is displayed in the error log file, then everything is very simple, delete the plugin and you're done.

– If the error points to the htaccess file, then in this case, if you do not understand anything in this file, it is better to contact your hosting support service so that this file can be restored to its original values.

– If the problem is not in the plugin, not in the theme or in the htaccess file and you don’t remember and don’t know where you climbed and what you changed, then of course the error log file is unlikely to help you. In this case, there are two options: 1 – contact a specialist, 2 – restore the site using a backup copy, if available. You may need to replace just one file, the name of which will be indicated in the error log file and everything will be resolved quickly.

Remember! Before making any changes to the site code, if you do not understand what you are doing, MAKE A COMPLETE BACKUP COPY OF YOUR SITE!

Greetings! Today, immediately after iPhone updates(while trying to log in with my account), I encountered an unusual error. The phone happily told me that this was not possible, and wrote approximately the following: “Verification failed, login failed. There was an error connecting to the Apple ID server." The most interesting thing is that because of this, the phone actually turns into an ordinary “dialer”, because it is impossible to use all Apple services - you cannot go to the App Store, you cannot download a game or application, you cannot activate iCloud, etc.

I successfully overcame this adversity, and I very much wish the same for you. And this instruction will tell you what exactly needs to be done in this case and how you can overcome the problem. Let's go!

First, I advise you to check whether the Apple ID is correct and valid, that is, functioning at the moment. To do this, follow the link to the official website and enter your account information. If it doesn't open, then... If everything is “ok”, we will look for other reasons for the failure.

The error occurs on iPhone and iPad

Problem connecting to Apple servers may already be waiting for you. And here there are only two options that can be taken:

1. Try to activate via your computer using iTunes. Although difficulties may arise here, more on that below.
2. Just skip creation of Apple ID and do this later, after turning on the device.

If you cannot log into your Apple ID on an already loaded device, or vice versa, you have logged in, but the App Store and other services do not work due to a server failure, you should pay attention to:

By the way, jailbreaking can also cause similar problems. Therefore, if the previous methods do not help, and you still cannot log in to your Apple ID, we get rid of the jail. Let me remind you that this can only be done correctly through.

On a computer using iTunes

In rare cases, server connection errors and various failures with the Apple ID or App Store may also occur while working with iTunes. However, they are quite easy to get rid of. For this:

1. We make sure that the computer is connected to the Internet (stupid, of course, but anything is possible).
2. Antiviruses, firewalls, and other defenders may block access to Apple servers. Turn them off for a while.
3. The iTunes version must be installed.
4. If your computer has already used your Account Apple ID, then we try to “unhook” it from the program. To do this, open iTunes - in the upper left corner, click on “store” - deauthorize this computer. Reboot the PC.

Let's try to log in again and, most likely, you will be able to do it!

These are actually all the actions that you can perform to combat the error connecting to Apple ID servers. Yes, there are not many of them, but the most important thing is that they really work!

P.S. Please like if the article was useful, and also write in the comments what helped and what didn’t! Or do you have any other ways to deal with this failure? Tell us about them - other readers will be very grateful!