How to solve x ray 1.6 engine problem. X-Ray Engine - Source Code

0) Install Visual Studio 2008 SP1 (Proffesional or Team, I assembled it in the first one), the service pack from the engine.vc2008.fixed.rar archive is suitable only for the English version of the studio, for the Russian one you will need to download it separately.

1) Create a folder on the disk, and another folder in it.

2) In this folder we place only the engine.vc2008 folder from the archive "engine.vc2008.fixed - the vs2008 project I fixed", we do not touch the SDK folder from there.

3) We take the SDK folder from the archive "stasvn\sources\engine.vc2005-2008 (~1.6.02 benchmark) - March 2010", from the sources sub-folder.
We place it in one folder under engine.vc2008

4) Now we add the SDK folder from the engine.vc2008.fixed.rar archive on top of it and agree to replace all files

5) Download two DirectX SDKs from the Microsoft website - 2009 March and 2010 June. (Each weighs about 500 MB), you can only use version 2009, but then you will not be able to build xrRender_R4. (LINK: fatal error LNK1181: cannot open input file "d3d11.lib"), and if you use only 2010, the game with R4 will not start.

After installing two DX SDKs, make sure that they have registered their paths to the studio; the 2010 SDK files should be after 2009, as shown in the figure:

Likewise for the Executable files and Include files sections. If you have any questions, search for information on Google using the words "connecting directx sdk visual studio 2008"

If the SDK versions are incorrect (or not connected), the log will complain about the absence of files like d3dXX.lib\.h)
There is no need to move folders from the already installed DirectX SDK anywhere. It is enough to register the paths to them globally for the studio (or for each project manually)

Comment from loxotron: just copy and rename d3d11_beta.lib to d3d11.lib in the folder with the Direct SDK, or even better, download and install DX SDK August 2009 and don’t bother with inappropriate versions.

6) Just in case, you can also install SDK\OpenALwEAX.exe, but I’m not sure that it is critically necessary.

7) Launch the project via ..\CoP\Project\engine.vc2008\engine.sln. When it loads, at the top of the studio, change the build mode from Debug_Dedicated (or any other) to Release. Next on the left/right there will be a list of folders with engine files, we need, first of all, the 3rd_party folder - right-click on it and select Build\Construct.

If everything is correct, then at the end the log below will write about 11 successful projects (or the number will be less, if some projects have already been collected before, the log will also report “skipped\up to date”) The main thing is that there are Errors\Fatal everywhere 0
I have completed all the projects without errors. (warning: full-fledged errors are not considered)

8) By analogy, from top to bottom, you can collect other Dlls; it is not necessary to collect the editor\dedicated\utils\plugins folders - they do not belong to the engine. xrGame.dll will take the longest to assemble. The rest are fast enough.

By the way, it is not necessary to collect all the Dlls. Only the necessary ones are possible. When they are ready, create a clean bin folder in the game folder. Place all the created dll files there (you can do it together with .pdb). If necessary, you can add missing files from the original bin ZP (2nd patch) if the game requires them. (Like wrap_oal.dll)
I launched the game from the original Stalker-COP.exe

If everything is correct, then the first lines in the game log/console will indicate the game build and construction date.

A large number of users of Microsoft products report losing activation of Windows 10 and turning the Pro version into Home. Users receive a notification about an expired key, and when trying to reactivate they receive error 0x803fa067 for Windows 10. How to fix problems and start the system - more on that later in the article.

Causes of failures

Microsoft, under standard conditions, offers the entry of activation keys to confirm authenticity, as well as the correct use of the installed version of Windows.

Activation error 0x803fa067 Windows 10

Error 0x803fa067 when activating Windows 10 can occur for several reasons:

Interesting to know! The company has officially admitted that there is a problem with the activation server for Pro versions (0x803fa067) for . Complaints came from users from all over the world: Korea, Japan and residents of other countries.

Using the Error Troubleshooter

The troubleshooting function is only available if a copy of Windows 10 (version 1607 and higher) has not yet been activated. This service will allow you to resolve existing activation problems. To use the functionality, the user must be an administrator.

To run the troubleshooter, follow these steps:

1. 1. 1. Click on the "Start" button.
      2. Go to the "Options" section.
      3. Next, select “Updates and Security”.
      4. And select the “Activation” item.
      5. Then click on the “Troubleshooting” line.

   If the service is unable to cope with the error, you can try to fix it yourself or contact technical support for help.

   
   Windows 10 activation

   Important! If error 0x803fa067 occurs when installing Windows 10, you may need confirmation of the legal purchase of the product: scans of purchase receipts, stickers and copies of letters indicating correspondence with electronic distribution stores.

   Microsoft reports that error code 0x803fa067 when activating Windows 10 may be due to the fact that the latest version was not installed at the time of the free update.

   Solution to error 0x803fa067 when activating Windows 10

   An Internet connection is required to activate Windows 10. To diagnose and know how to fix error 0x803fa067 in Windows 10, you should follow a series of sequential steps:

   
   

   If the above steps do not help, contact

The game Stalker has thousands of fans around the world. Vivid characters, an atmospheric environment and unsurpassed realism of everything that happens. The advantages of the game can be listed for hours, but there are also disadvantages. The main ones are instability and bugs. One of the common errors in the Clear Sky part is “A crash has been detected by BugTrap”. Let's figure out how to fix this failure.

Crash “A crash has been detected by BugTrap” in Xray Engine

Causes

The error “A crash has been detected by BugTrap” in Stalker occurs both during certain events (entering a location, weather changes, character actions) and when trying to start the game. What's the matter? The error appears when the game settings are inappropriate. Interestingly, the error window pops up even on high-performance computers. Of course, you shouldn’t discount the influence of game mods, which only make it more unstable.

In addition to Stalker (CHN, Call of Pripyat, Shadow of Chernobyl), this event occurs in other games - Cossacks, Point Blank, Lost Alpha, etc.

Ways to fix the problem

This error message appears in several situations, so we will talk about each of them.

Crash when moving to another location

So, to get rid of the problem, let's take six simple steps.

1. Let's launch Stalker.
2. Go to the “Settings” menu.
3. We are interested in the “Video” section.
4. Switch the mode of the first line “Render” from “Static lighting” to “Objects dynamic lighting”.
5. Click “Apply”.
6. Download the game and try it.

If the result is the same, then you can try selecting the remaining mode in the first line. Problem still exists? Then let's move on.

The game starts, but crashes not only when going to a location

The appearance of the error “A crash has been detected by BugTrap” in Stalker at any time indicates a settings mismatch. It is recommended to reduce not only the visualization parameters, but also the detail and screen resolution. The lower the quality, the more likely it is that the game will stabilize. As previously reported, this phenomenon also occurs with powerful modern components. This is directly related to the game itself; there is no need to worry about the condition of the equipment.

An error occurs when trying to launch Stalker

After changing the settings to improve quality, the error may appear for the first time, and then during subsequent launches of the game. How can I reset the settings to “Default” without starting Stalker? It's done like this.

1. Find the folder with the installed game.
2. Select the “Save” folder in the directory.
3. Here lies the file we are interested in, “user.ltx”. Let's delete it.

By the way, read this article too: How to uninstall Elements Browser Setup

After this, the game settings will be reset to their original settings.

Extreme case

If it happens that nothing helps, then we recommend reinstalling the game in another directory, and then transferring the save folders to it (user.ltx and other files located separately do not need to be taken). Disable the Internet connection - this must be done, as the application can download problematic files that cause a malfunction. At the same time, we advise you not to rearrange mods for a reinstalled game. Let's try to launch it.

Creating a departure log

If you cannot fix “A crash has been detected by BugTrap”, then you should create departure log, and send it to the technical support service of the modification developer. The crash log is created simply - when you close the error window via “Close”, information about it is cached, after which you just need to create a text document and click Insert there. This log can also be accessed in the search and on the forums in the STALKER Departures Directory.

As a rule, this step is rarely reached. Simple manipulations with the settings solve the problem in 99% of cases. If you have any comments or advice of your own, please leave a comment below.

There is a fairly common error in the game "Stalker: Call of Pripyat". The error itself is that the game crashes and the “X Ray engine. A crash has been detected by BugTrap." In this article you will learn why this error occurs and how to deal with it.

Xray engine error in the game "Stalker"

Xray engine, what is it?

Xray engine is a bug nicknamed the bug of misfortune; the bug itself gets its name because of the drawn beetle that appears next to the description of the bug. The bug is that after starting the game you are thrown to the desktop for no reason, after which you see a window describing the problem.

Why does this bug appear? A very large number of people who played stalker tried to figure this out, and for more than one month. Unfortunately, the developers themselves special attention they didn’t pay much attention to this problem, at first they simply ignored it, but after they learned that the problem was occurring among quite a large part of the audience, they released a couple of updates. The updates themselves helped solve the problem with the game crashing, but only for a certain part of the audience; a large number of the audience was still left with this bug and the developers were unable to release the final patch with its solution, although they helped the majority of players.

It is worth noting that a large number of players claimed that the problem lies in old video card drivers. If these drivers have been updated, then the problem went away and the game no longer crashed, but, unfortunately, this method of solving the problem did not help all players. So how to solve this problem? Below are the instructions.

Fix bug “Bug of misfortune”

Other Possible Causes

If you are unlucky and none of the solutions to the problem helped, then you can find this solution in changing the swap file. We struggled with the bug for a long time, but this particular solution to the problem was found not so long ago.

The problem is that players have a small page file, but what is it? The page file creates a so-called virtual memory with RAM, making your computer run a little faster. To solve the bug via the page file, you need to change it, doubling the amount of RAM. How to do this?

To begin, you must right-click on the “My Computer” icon, and then select its properties. In the properties you can find a tab with virtual memory, in which, in fact, you can increase it. you significantly reduce the risk of departure After these steps, most likely, you will even be able to eradicate this problem from your computer forever.

Conclusion

We have looked at all possible ways to solve this bug, as well as described in detail what needs to be done to solve the problem. It’s worth briefly writing down all the solutions to the problem, here they are:

• Availability of patches. Make sure you have the latest patch.
• Purchasing a license.
• Cheats that make the game unstable, thereby allowing a bug to appear.
• Fashion.
• Permission.
• Swap File

We hope this article helped you and you can play into stalker without any problems.

Hi all! Today we will talk about the main reasons for the error “X-Ray Engine 1.6 has stopped working” in the game Stalker Call of Pripyat and all possible ways to fix it.

In 2006, the world saw the best Ukrainian game of all time STALKER from GSC Game World. The game engine in all parts was the Xray Engine, it was developed over the course of five years, ultimately support was provided by DirectX 9, although DirectX 8 was originally planned. Subsequent updates were also made to versions 10 and 11 of DirectX, but its potential was no longer revealed.

"Bug of Misfortune"– that’s what this bug was called. It consists of randomly exiting to the desktop of the operating system and then closing the game S.T.A.L.K.E.R. It is in the description of the error that a drawn beetle can be seen, hence the name.

For what reasons does X-Ray Engine 1.6 crash? Many users have spent months studying the essence of the problem, but there is still no clear answer. GSC Game World was not particularly interested in this issue, although the new updates that were released partially solved the problem.

The majority of users who suffered from such a bug saw the reason in the old video card drivers; if they were updated, then there were much fewer crashes.

1. The very first game STALKER: Shadow of Chernobyl was far from ideal - this concerned some immortal units and partially empty locations. In addition to everything, the much-hated Xray Engine 1.6 was discovered. This bacchanalia continued until patch 1.5.04, it was with its release that the gameplay acquired some stability.

• When downloading the game, you should make sure that availability of all patches, they can be downloaded from the official website of the developers.

2. The game was protected by the StarForce system, which is designed to protect content from illegal copying and distribution. It is logical to assume that the majority of users download NoDVD, thereby bypassing the protection, but this is where the “Bug of Misfortune” awaits.

• The only solution can be to buy Stalker on Steam.

3. Any game now simply cannot be imagined without mods, but in S.T.A.L.K.E.R. they are necessary, because sometimes there is complete boredom and despondency. This is especially felt in “Shadow of Chernobyl”; here it is not recommended to play the pure original, but it is custom additions and become the cause of Xray Engine 1.6.

• When choosing a patch, you should carefully study the reviews and comments of their developers, you need to find the most successful one, but even in this case it is impossible to guarantee that the bug will be eliminated; the likelihood of it still remains.

4. "Quick" passage and hacking may also be punished by being sent to the main screen, this applies to all so-called “ cheaters" Abuse of adding additional weapons and endless charges provokes the system to lose stability, making the game engine extremely susceptible to lags.

• You should resort to cheats only in extreme cases, and if such a case occurs, then you will need to try many programs before you find stable file.

5. Xray Engine is not well-developed, which can sometimes manifest itself in the most unexpected bugs; this is exactly what happens when setting your own parameters for a monitor. The “misfortune bug” is caught by reducing the resolution for playing in windowed mode.

• Take only recommended parameters for gameplay.

6. The last, most common bug associated with Xray Engine 1.6 is small swap file. The best performance is achieved precisely when it exceeds twice the amount of RAM.

• You can correct the data through the “my computer” menu on the desktop by selecting its properties. The “virtual memory” item should be changed to the required indicators, thereby reducing the risk of crash.

Here is one of many video instructions about fixing the Xray Engine 1.6 error.

I hope our advice will help you, and the problem of X-Ray Engine 1.6 stopping and crashing from Stalker will be solved.

In contact with