Mi PC Suite does not see Xiami phone - what to do. Why Xiaomi Mi PC Suite does not see the phone and how to set it up Difficult solutions

Why are Nokia phone owners unable to connect their phone to their computer? There can be many options - for example, the phone often fell, was dropped in a puddle, or got wet in the rain. Common causes are also a faulty cord or connector. In the case of a USB cable, you can easily check it by connecting your phone through another cable. And if the connector is faulty, then there is only one option - contact a service center.

There is also a situation when, when you connect your phone to a computer, the device responds, but the computer does not. The phone most likely “feels” that it can be charged via the USB connector and turns on this mode. And the computer, in turn, sees only the consumer in it, but does not see the device itself.

In this case, there are several options for solving the problem. The first is to install drivers on the phone. They are usually on the disk that comes with the phone, or on the manufacturer’s official website. The second option is to install the NokiaPCSuite program on your computer so that the computer can recognize the device. The program is also available on the installation disk.

So, if the computer cannot recognize your Nokia phone when connected via a USB cable, there are several universal methods that can help solve this problem.

First, you need to make sure that you are using a proprietary Nokia USB cable, and that the cord is correctly connected to both the computer and the phone. Sometimes a way to turn off your mobile phone and turn it on again helps. You can also try removing the battery from the phone and then putting it back in to reboot. Alternatively, you can restart your computer.

If possible, you need to check the phone connection on another computer. This way you can understand where the problem lies - in or in your computer.

NokiaSuite must also be installed on your computer. You need to make sure that you are using the latest version of this program (you can check for updates through the NokiaSuite software update menu). Even if everything is fine, sometimes completely reinstalling the application helps.

Nokia devices have different connection modes that you can experiment with - “storage mode”, “media file transfer mode”, etc.

If nothing helps, restore it

For those who have Nokia PC Suite is not installed or you cannot install it for some reason, there is a way in which you can connect to the Internet using standard operating system tools. It takes a little patience and attentiveness. For connection, standard Windows XP and Windows 7 tools are used. Below are detailed screenshots describing actions that will easily help you use the Nokia S40 3rd, 5th, Symbian 7.0 - 9.4 phone. as a modem.

What we need:

• Connectivity Cable Driver, better than the latest version.
• The phone number through which you will connect.
• USB cable to phone.
• The account balance must be sufficient to use the Internet. More details on the website of your telecom operator.
• And of course, a computer with Windows XP or Windows 7.

Setting up your phone, installing drivers

First, let's set up the phone itself. You need to choose an access point that corresponds to the Internet service, but not wap.

So, when you are done with setting up your mobile phone, install the required driver (Connectivity Cable Driver). It installs quickly and without problems. I won't describe the installation. When installing the driver, the phone must not be connected to the computer.

After you have installed the drivers, connect our phone to the computer via a USB cable. A message will appear on your phone asking you to connect. Choose PC Suite mode. Let's wait a bit for the driver installation to complete. Reboot the computer.

Setting up a connection to a computer on the Windows XP operating system

Attention!
During setup, the phone must be constantly connected to the computer in PC Suite mode.

1. First you need to go to the START menu -> Control Panel ->

2. In the “Network tasks” tab, select the first item “Create a new connection”.

3. A window with a New Connection Wizard will appear. Click on the “Next” button.

4. Select the type of network connection – “Connect to the Internet”, click “Next”.

5. Then left-click opposite the item “Set up a connection manually” and click “Next”.

6. At the next stage, select “Via a regular modem”, again click “Next”.

7. In the next window, in the Service provider name field, write any word or leave it blank, click “Next”

9. At this stage, fill in the Online Account Details. We leave all fields blank if the operator does not require filling out the form. Click the “Next” button.

10. Well, here is the last stage - “Completing the New Connection Wizard”. We look at the inscription “Add a connection shortcut to the desktop” and put a checkmark on the left. Click “Finish”.

That's all. Let us remember that at the penultimate step we selected the option “Make this connection the default Internet connection.” This connection will be used by default.

Checking the connection

1. On the desktop, launch a shortcut with the connection. I call it “My Connection”.

2. In the window that appears, click the “Call” button.

3. After connecting, a dialog box with the connected modem and its speed will appear in the lower right corner. The speed depends on the quality of the operator's connection and the capabilities of the phone.

Comment!
By clicking on the connection icon in the lower left corner and selecting “Status”, you can look at incoming and outgoing traffic, connection time, and speed.

If you have problems

• We read the Windows help and try to resolve the connection error.
• Reboot your computer and phone.
• For smartphones, in the phone connection settings we find a line that says “Packet data”.

When you select the previous item, another one will appear where you need to specify the access point that we have chosen for the Internet. Specify Packet connections “On demand”. Next, find the “Data transfer” item in the “Connections” menu (if you have this item). Select “Unlimited” in the “Connection duration” line. Reboot the phone.

If, however, previous attempts to resolve the error did not help, then you need to write an initialization line. We connect the phone to the computer (if you do not have one connected), go to “My Computer” (right click on the desktop) -> Properties -> on the “Hardware” tab ->

Click on the plus sign next to the “Modems” item. Choose your phone. Right-click -> “Properties”.

Go to the “Advanced communication parameters” tab. In the line named “Additional initialization commands” we enter AT+CGDCONT=1,”IP”,”Your access point”. Each operator has its own access point. We write everything down without spaces.

Click "OK". That's all.

Setting up a connection to a computer on the Windows 7 operating system

After we have installed the necessary drivers and restarted the computer, we proceed to setting up our telephone connection.

1. At this stage, connect your mobile phone to the computer. Select “PC Suite” mode on your phone

2. Click on the “Start” button -> “Control Panel”.

4. In the window that appears, select the “Setting up a telephone connection” section, click “Next”

5. Next, in the “Create a remote access connection” window, in the “Dialed number” field, enter combination *99#. If you wish, you can choose a custom user name and password (when connecting, a window will appear asking for your user name and password). Click “Connect”

The process of connecting to the Internet will begin. We need to wait a little. After successful connection, the following window will appear:

6. Feel free to click on the “Close” button.

7. After a while, the “Network Location Settings” window will appear in which it is advisable to select the item called “Public Network”. Then click on the link “View or change Network and Sharing Center settings.”

8. The “Network and Sharing Center” will open again. Here we can see that our telephone connection has appeared in the “View active networks” block. For convenience, let's create a shortcut to our connection on the desktop. Select the item on the left “Change adapter settings”

In the window that opens, right-click on our connection and in the drop-down dialog box, click on the “Create shortcut” item. After this, a message will appear: “You cannot create a shortcut in this folder. Should I mark it on my desktop? We happily press the “Yes” button.

Ready! To view the status of our connection, go to the tray, click on the network connections icon, right-click on our telephone connection and select “Status”.

In this article we will look at how to connect a Nokia phone or smartphone to a computer using the Nokia PC Suite program.
Attention, if you have Nokia PC Suite installed and still the computer does not see the phone or cannot connect to the Internet, uninstall the previously installed program and install a new one, this usually helps!

How to connect your Nokia phone to your computer, I can’t connect my phone to the computer, the computer doesn’t see my phone, how to access the Internet through the phone using it as a modem, many people are now asking these questions on the Internet. Nokia PC Suite is a solution to all problems with connecting your phone to a computer and using the Internet from your phone using your phone as a modem. Here we will learn how to connect a Nokia phone to a computer using the Nokia PC Suite program. First, we need to download the Nokia PC Suite program for free from this link; this new version weighs about 65 MB. For those who do not have Internet from a computer, but use unlimited Internet from their phone, you can download it directly from your phone and then install it on your computer. After installing Nokia PC Suite, you can connect your phone as a modem to your computer and use telephone Internet on your computer.

1) If you have already downloaded, then start the installation by clicking on the downloaded Nokia_PC_Suite_ALL, a window will open to select a language for the program, select and click on the checkbox as in the attached picture below.

2) A new installation program window will open, confirm the installation by clicking on the checkmark.

4) The next step is to select the installation location for the program, leave it as is, and the installation process begins.

5 In the program window appears Installation completed and the message that this program will install Nokia PC Suite on your PC. Previous versions will be replaced by new ones. Confirm and click on the checkbox.

6) Installation of Nokia PC Suite on your PC is completed, restart your computer for the changes to take effect.

7) After rebooting, a shortcut to the PC Suite program will appear on your computer and a window will open to start connecting your mobile phone to the computer, confirm with an arrow to the right.

8) Select the type of connection between the phone and the computer Connection via cable.

9) Connect the phone to the USB using a cable. The computer finds the connected phone, searches for and installs the necessary drivers and displays a message that new equipment has been found and is ready to use.

Even if after installing Nokia PC Suite and rebooting the computer for the changes to take effect, the program window does not automatically open asking you to connect the phone to the computer via USB, this is not a problem, since when you connect the phone, it will be automatically detected. Now if you open the My Computer desktop shortcut, you will see your phone in the list and can view files on your phone and memory cards. You can also use Internet on your computer using your phone as a modem, as well as update the phone’s firmware. After installing this program, you will no longer need any drivers; everything you need for Nokia is in one set.

• Reviews, comments, questions and answers on the topic how to connect a Nokia phone and smartphone to a computer you can add below, I hope this article helped you.
• We kindly ask you to help with useful tips with users and ways to troubleshoot problems.
• Thank you for your responsiveness, help and useful advice!!!

23-08-2018
10 p.m. 34 min.
Message:
Hello! When connecting a Nokia6 phone to a PC, the connection is visible, but the PC does not see everything that is on the phone (empty)

09-05-2018
04 o'clock 17 min.
Message:
Hello, the sensor on my phone does not react at all. And through which input to connect the phone + computer. Thank you

27-01-2018
6 p.m. 30 min.
Message:
After the latest Nokia 1020 update, no computer can see the phone anymore. I hope very much for your help.

13-01-2018
10 p.m. 41 min.
Message:
Everyone below is fucking monkeys

15-06-2017
02 o'clock 03 min.
Message:
I connect via bluetooth to the Internet, Nokia 5130 phone, Windows 10) Everything works fine, one problem, every hour the connection drops and you need to connect again... What could be the problem? Tell me please

20-05-2017
13 o'clock 23 min.
Message:
Thank you very much, everything worked out. Connected Nokia N8 to a Laptop with win8.1. It worked only via bluetooth, but it worked.

10-01-2017
15 o'clock 14 min.
Message:
When connecting NOKIA 222 using a cable, the program writes "connected in incompatible USB mode

09-01-2017
00 o'clock 51 min.
Message:
No result, connected to a laptop

28-10-2016
11 p.m. 58 min.
Message:
Need to unlock NOKIA 222 I installed nokia cable connection driver, nokia suit, but it does not detect the phone. It says “Your Phone is in file transfer mode and cannot be used with PC Suite.” There are only 2 options on the phone itself: only charging and storage. In the device manager it is identified as Nokia 222, but the driver itself is not installed. Mynokia tool cannot connect to the phone. What to do? Help, I urgently need to unlock my phone :(

07-08-2016
6 p.m. 51 min.
Message:
Hello

31-01-2016
20 o'clock 33 min.
Message:
Hello, please tell me, we connected the Nokia 5130c-2 as a modem to the PC, the Internet shows that there is speed and time is passing, everything is as it should be, but I open the browser and that’s it, nothing opens, it says reload the page. Why is that? What to do? Thank you in advance!

10-01-2016
6 p.m. 37 min.
Message:
Does this program work for NOKIA215?....

24-10-2015
15 o'clock 35 min.
Message:
I can't unlock my phone

11-10-2015
12 o'clock 19 min.
Message:
I already have the Nokia PK Saite program, but I bought a different phone model and now I can’t access the Internet. I now have a Nokia 215. It tells me that it is impossible to determine the authenticity of the phone. Help me please!

23-09-2015
21 o'clock 53 min.
Message:
Svetlana, what model is this? Doesn't it have a Wi-Fi hotspot function?

23-09-2015
21 o'clock 43 min.
Message:
I installed the nokia pc suite program, it works fine, the internet connection is established. but when I open any of the browsers, there is no Internet. What could be the matter here? Tell me please!

30-08-2015
08 o'clock 18 min.
Message:
I can’t install nokia pc suite on my laptop, it says maybe the Windows installer is not installed. HELP

21-08-2015
19 o'clock 08 min.
Message:
Everything worked out, Nokia 6300. Thank you!

10-05-2015
13 o'clock 46 min.
Message:
everything will connect well, but on your phone you need to enable connection via Nokia pisi and how to do this if the screen doesn’t work, it’s stupid, somehow a useless program if the phone screen is broken

28-01-2015
17 o'clock 04 min.
Message:
Why is the network interrupted approximately every 30 minutes when you go online and have to connect again (how can I make sure it doesn’t interrupt? Thanks in advance!

14-01-2015
10 o'clock 13 min.
Message:
and I did it in 7 minutes HAHA

01-01-2015
2 p.m. 41 min.
Message:
This program of yours is crap. The phone is not visible, it is identified only as a camera, there is no access to files, the browser window is empty. You are driving your “programmers” with a filthy broom - they are probably the stupid sons of some stupid mayors and bureaucrats. Damn the day I bought Nokia!

07-12-2014
13 o'clock 24 min.
Message:
Thank you

06-09-2014
6 p.m. 58 min.
Message:
I can’t connect the phone, what should I do? help

03-09-2014
10 p.m. 42 min.
Message:
How to connect Nokia X to a computer on Android?

22-06-2014
17 o'clock 50 min.
Message:
and my phone has no cable jack at all!

09-06-2014
10 p.m. 17 min.
Message:
Maybe in your phone settings you need to select the Nokia PC Suite mode, or you have a Nokia phone model that needs the Nokia Suite program. You need to try different options and everything will definitely work out.

09-06-2014
21 o'clock 51 min.
Message:
This program does not detect my phone and in the section (where you can select the model of the phone, it is completely empty, and the installation wizard shows that the device is not detected

05-05-2014
09 o'clock 32 min.
Message:
How to connect the Internet on your computer via a Nokia phone modem, see the page www..php.

05-05-2014
09 o'clock 12 min.
Message:
My phone is Nokia 301DS. How can I access the Internet through a computer using the phone as a modem?

16-04-2014
21 o'clock 26 min.
Message:
First of all, you need to restart your phone and computer and connect again, there may be a simple problem.

16-04-2014
20 o'clock 21 min.
Message:
I've been using Nokia PC Saite for a long time and haven't had any problems. But now, I can’t connect; while connecting, a window pops up that says ““network connection failure!” Perhaps the modem is being used by another application or is configured incorrectly."" Tell me how to solve this problem.

10-03-2014
21 o'clock 43 min.
Message:
Nokia PC Suite program is only for Nokia phones and smartphones. For LG there must be a different program or driver, look at the office. LG website or on the Internet. I will soon add it to the site for downloading via a direct link.

10-03-2014
21 o'clock 05 min.
Message:
I installed Nokia PC Suite. But I have an LG phone. I can't open files on my phone. What to do? Help me please.

01-11-2013
16 o'clock 08 min.
Message:
nokia

30-10-2013
15 o'clock 29 min.
Message:
Dial the code *#7370# a full reset to factory settings erases everything, applications, files, the phone will be like new.

30-10-2013
00 o'clock 24 min.
Message:
Nokia 5130 displays "insufficient memory" message. The phone is completely empty. When viewing the memory status, next to the message there is 21 GB. But the phone is empty!!! Resetting and reinstalling did not give anything.

26-09-2013
6 p.m. 14 min.
Message:
Nokia PC Suite program - connection setup freezes when installing PC Connectivity Cable drivers, in the main program window the phone phone is visible in the window

17-09-2013
09 o'clock 37 min.
Message:
Try if your phone model is suitable to reset with the phone turned off, see the link www..php

17-09-2013
09 o'clock 06 min.
Message:
I have such a problem on my phone there is a security code when the phone is turned off, but I forgot the code and I don’t know what to do. mynokiatool_111 is there, but it comes up to me that the phone was not found, what should I do, what other program should I download?

17-06-2013
17 o'clock 59 min.
Message:
If you select Nokia PC Suite mode on your phone when connecting to a computer and the problem persists, you can try restarting the computer and phone and try again.

17-06-2013
17 o'clock 47 min.
Message:
I have all the points except 7 - it only works halfway.... I connect the phone to the computer via a USB cable and select the Nokia mode.... and that's all.... nothing else happens..... program Nokia PS Suite is trying to connect but there are no results.... error. what to do?

19-05-2013
20 o'clock 09 min.
Message:
Sometimes it happens that you need to reinstall some programs; I myself also reinstalled Nokia PC Suite when I couldn’t update the phone’s firmware.

07-03-2013
19 o'clock 48 min.
Message:
It helped after reinstalling Nokia PC Suite, but it probably starts to fail over time.

07-03-2013
19 o'clock 01 min.
Message:
Try reinstalling Nokia PC Suite

07-03-2013
17 o'clock 28 min.
Message:
For some reason, Nokia PC Suite does not see my phone and the computer cannot determine the phone model, it says “an error occurred while installing the equipment.”

Recently, complaints from owners of Xiaomi phones and tablets have become more frequent that Mi PC Suite installed on a PC does not see the phone under any conditions, displaying the message “Connect your device via USB”. Almost all popular devices in the line are susceptible to connection errors - Redmi Note 4 Pro, Mi5, Mi6, Mi Max, etc. Let's try to figure out the problem together and find a solution.

What is the essence of the problems?

In fact, the list of reasons is huge and varied. Here are the most common cases:

• incompatibility of the program and the Android firmware version on the phone;
• damage to the cable or damage to the USB port;
• viruses;
• blocking by firewall, antivirus or firewall;
• using outdated drivers.

To get to the bottom of the problem, you will have to try all available ways to solve the problem. But, alas, there is a possibility that the device will never be recognized by your PC. Let's get started.

Possible solutions

First you need to make sure the connection cord is intact. If possible, it is advisable to use original cable, because using store-bought “Chinese” cord may cause a similar problem. At the same time we check the work USB interface. Try connecting the device to all available ports. If you have a second laptop or PC, we try to do the same on it. You shouldn't rule out damage to the interface on the phone itself, but there's no way to check this without special skills - an exception if you have another similar device.

Setting up the connection

Sometimes it happens that it is disabled Debug mode. To do this we go to "Settings" device - “About the device”– looking for an item with a description MIUI versions and click on it more than 5-10 times, a menu will pop up "For developers", and here we activate “USB Debugging”. Please note that when connecting, a menu for selecting the connection type may open. We are interested in the format MTP.

If the phone is not detected, but charging is in progress, then slide the lock window and see if there is an inscription on the screen "Tune". You will need to perform the procedure every time you connect. It is likely that this problem will be corrected with subsequent firmware updates. If everything is not clear, then here is a video instruction.

Chinese version of Mi PC Suite - why download it

Now we need to determine which firmware version is installed on the device. The problem is that Mi PC Suite does not work with Android Marshmallow and higher. If you have this version of Android or higher, then only the Chinese version of MiPS can help, which also opens up other possibilities. Unlike the adaptive version, in some cases it will still be possible to establish a connection if the PC does not see the phone.

If you have an Android lower than Marshmallow, then it is likely that the problem will be solved with a software update. To do this you need.

In some cases, it is better to open the program and wait a few minutes, and then connect the gadget.

MIUI version update – “You need to update your device”

Sometimes when you try to connect, a message appears asking you to update the MIUI firmware to the latest version - “You need to update your device to use Mi PC Suite”. This happens even with devices that have the latest firmware version. As before, the Chinese version of the software will help solve the problem.

Alternative – WiFi

It is possible to manage and transfer files without a cord. Many users forget about Wi-Fi technology and its capabilities. With its help it is absolutely possible to set up a wireless connection. The best option is to download file manager, working with ftp. This function is much more convenient to use. In addition, this is one of the few options to exchange data when other types of connections are not available.