Anyone can encounter a situation where their phone gets wet. The mobile device may fall into the sink or toilet. In most cases, this leads to a malfunction of the phone, which means the need to buy a new one. A few tips will help solve this problem.

First steps if your phone gets wet

With quick orientation and no panic, the mobile phone may remain in working condition. In some cases, independent actions are sufficient, without contacting a specialized service.

First of all, you need to immediately remove the device from the water. Headphone ports, charging ports and other openings quickly allow moisture to pass through. After removing the case, carefully wipe it with a paper or terry towel and remove the battery from the phone.

IMPORTANT! Be careful not to allow lint from towels or paper to clog the port passages.

SIM cards are quite resistant to damage, including being under water, but it also needs to be removed and wiped. We perform similar actions with memory cards (if any).

After disassembling the parts, you need to check the phone for damage when it is under water. Modern smartphones are equipped with a special white indicator. It is located in the battery connector. If the indicator turns pink or red, the device is seriously damaged. Repair work will be required.

After removal, place all components on a paper or terry towel. The device and its parts should be turned over periodically so that moisture that gets inside finds its way to the surface.

At the initial stage, these actions will be enough to dry and revive the mobile device.

IMPORTANT! If the phone was connected to the charger during the fall, it is strictly forbidden to pull it out, since water is a conductor of current. You should seek help from a specialist.

Is it possible to dry your phone with a hairdryer?

Fen has long been called the main assistant for every girl. With its help you can quickly dry and style your hair. Many people use a hair dryer to quickly dry clothes.

When your phone falls into water, the first thought that comes to mind is to dry it with a hairdryer. However, such actions should be abandoned - you cannot dry the gadget with a hairdryer. Blowing with a hairdryer, even in a gentle mode, will worsen the situation. The incoming air disperses water droplets deeper into the housing. This causes the device to malfunction. After such repairs, you will need to purchase a new smartphone.

Exposure to hot air from a hair dryer can melt some of your phone's fragile components. Hot air will speed up the oxidation process of individual parts, increasing the likelihood of corrosion.

Conclusion: you should avoid using a hair dryer to dry your mobile device.

What can you do if your phone gets wet?

After all components have been removed and disassembled, it is better to leave the device for a while. There are some methods you can use to help speed up the drying process.

A few additional methods:

IMPORTANT! Placing a wet device in a microwave oven is strictly prohibited. Such actions will lead to permanent failure of the device. In addition, a phone placed inside the microwave chamber can cause an explosion.

If after preliminary repairs the smartphone still does not turn on, you need to check the functionality of the battery by connecting it to another device of the same model. If the battery works, the problem is in damaged microcircuits. Due to exposure to moisture, boards quickly corrode and oxidize. In this case, you will need to consult a specialist.

Without a mobile phone, the life of a modern person has become almost impossible. If you are not careful, the device may suffer from excessive exposure to moisture. Knowing the correct sequence of actions, you can fix the phone yourself.

With the growth of technology, it is no longer uncommon for people to own expensive smartphones. But often they slip out of your hands, and sometimes, sadly, right into the water. You can forget your phone in the pocket of some item sent to the washing machine. But don’t worry, because if you act quickly, the device can be saved. To do this, it is important to know a few recommendations on how to dry your phone.

First necessary measures

To “reanimate” a mobile device that has fallen into the water, measures must be taken as soon as possible. After all, the future of the device depends on the first actions:

How to dry your phone correctly

When the device is turned off and the battery is removed, you must immediately subject the device to emergency drying. But to do it right, it’s worth considering a few tips on how to dry your phone at home:

If the battery is not removable, after turning it off, as far as possible, you need to disassemble the device and urgently contact a service center. There the device will be opened and the battery power will be turned off. Please note that even when the smartphone is turned off, the circuit is connected to the battery, and if water gets in, it will deteriorate.

Checking the operation of the mobile device

After drying, you can check how the device works:

If the check shows that there are no problems, then everything ended well. If problems are identified in the form of a breakdown, you must contact the service center.

How to dry your phone from water correctly and quickly is now more or less clear. The algorithm of actions is not so complicated. But it happens that when a problem arises, people act incorrectly, as a result of which the device breaks down.

What is prohibited to do

How to dry your phone from water safely for the device - there are additional warnings for this:

The question of what to do if your touchscreen phone gets wet should be resolved by contacting a service center, where specialists will disassemble it and clean the board to avoid negative consequences in the future. But if you don’t have such an opportunity yet, then you can try to cope on your own by performing a number of simple manipulations described in our article. The main thing is to act quickly. If there are removable elements, they should be removed without delay. This applies to the battery, back cover, SIM cards and flash drive.

What to do if moisture gets into your phone?

If you don’t know what to do if you wet your smartphone and it doesn’t turn on or the sensor doesn’t work, then you need to use the means at hand to dry it. First of all, take a towel or dry wipes and wipe the smartphone wherever you can reach. You can use a cotton swab to access the connectors. You need to act quickly, otherwise the water will begin to evaporate, which will result in damage to the internal components of the structure. If the phone has not been in the water for a long time, then after these steps it should turn on. If this does not happen, then we move on.

Drying your phone

The question of what to do if water gets into your touchscreen phone needs to be resolved using a hairdryer, drying it on all sides. With its help, you need to dry all the holes through which water and air pass quietly. First of all, this is the speaker. At the same time, be careful not to hold the hairdryer too close to the phone, otherwise you may damage the microboard. This can easily be seen using a piece of paper as an example. As soon as you bring it close to the hairdryer, a blurry brown spot appears on its surface. If after half an hour the smartphone still refuses to turn on, then the next point is for you.

Long drying

This is a complex method that should be used only as a last resort, when the phone has been under water for a long time. We put it in a dry place in the house, for example, in a pile of laundry. The main thing is to leave it in a dry and warm place, but it should not be too hot.

Looking for an answer to the question of what to do if water gets inside the phone, many come across advice to put it on the battery, but this is highly not recommended. This is a very risky procedure, in which the case heats up too much, and at the same time moisture evaporates faster, which increases the likelihood of damage to the microcircuits. When the device lies in a warm and dry place, water will gradually evaporate from it, exiting through the functional holes. If the battery is removable, it is better to remove it immediately. Water will evaporate faster if you place your phone face down. In this way, it is possible to restore functionality in most cases, but if all else fails, then you can only rely on the service center.

Even more interesting:

Although there are many waterproof devices on the market now, most smartphones still do not survive contact with liquids well. Getting caught in the rain is not the worst thing that can happen, but you can dry the device and return it to working condition even after accidentally washing it or falling into a puddle or pool.

What to do if your touch phone gets wet

Before proceeding with any actions, you must immediately turn off the gadget. For phones with a non-removable battery, this can be done by long pressing the lock button. Otherwise, simply remove the battery - this way you will avoid a short circuit, otherwise even a service center will not be able to restore the device’s functionality. Then follow these instructions on how to dry the gadget:

1. Disassemble the device. Ideally, each part should be dried separately: remove the SIM and MicroSD cards. Remove the covers, protective glass and back cover. There is no point in unscrewing everything down to the screws; it will be difficult to put the device back together, so if you have a monoblock model (with a non-separable case), stop at removing all inserted cards. Use screwdrivers only if you are sure that you know the gadget's structure well.
2. Place the device with the screen facing up. Let gravity do its thing and allow water to accumulate at the bottom of the gadget.
3. Absorb moisture with paper towels or napkins where possible. Turn the device slightly so that any accumulated liquid flows out through the holes. At the same time, avoid sudden movements and do not shake the gadget in the hope of drying it faster, otherwise water will flow inside again and flood hard-to-reach places.

Keep in mind that turning on the device immediately after you have wiped the surface is strictly prohibited. The most important and final stage is drying the phone after water. Depending on which method is chosen, this will take a different amount of time.

You can dry the phone by leaving the device in the air for 3–7 days, but this is long and does not guarantee further operation, since radioelements oxidize under the influence of liquid. Use an absorbent substance to help draw water out of the device and dry it faster.

How to dry your phone at home

An absorbent is a substance that draws and absorbs moisture. Whichever method you choose, you will need a container to place both the product and your phone. Drying rules for each method are below:

1. Put the phone in the rice. This is the most famous absorbent. The fact that you can dry your phone in rice is not a myth; this remedy is effective. Place the gadget without battery and cover in a bag of cereal for 2-3 days. Turn the device over once every 12 hours.
2. Use silica gel cat litter. This product is considered an even better absorbent than rice. To dry the gadget, place it in a container with filler for 48 hours. In this case, the product should completely cover the device. Turn your smartphone over from time to time.
3. Dry your phone in silicone shoe balls. An alternative option, similar in effectiveness to the previous one. Draws out moisture in 2 days.

Advice that applies to all methods: check your smartphone every 6 hours and wipe off moisture from its surface with paper napkins. In addition, in case of severe damage, you can replace the absorbent with a new one.

Is it possible to dry your phone with a hairdryer or vacuum cleaner?

To dry the elements by removing liquid from the inside of the device, it is better to use a vacuum cleaner. To do this, put on a narrow nozzle and sequentially bring it to all the holes of the gadget. Remember that after this procedure you still need to place the device in an absorbent or leave it to air dry.

All the tips mentioned above are relevant both for smartphones that have been in water, and for those that have swum in soda, lemonade, tea and other liquids. Do not rush to wash the substances under the tap, but follow all the steps in the instructions or take the damaged device to a service center - they will know how to dry it thoroughly.

Repair may be necessary even when the procedure was carried out correctly: diagnostics will show whether the boards and radio elements have oxidized under the influence of liquid. In addition, there are times when water stains remain under the display.

Video

In this article we will tell you what to do if your phone falls into water. The information is relevant at the moment because for almost all smartphones that do not have an IP67 or IP68 rating, moisture can cause serious damage. In this case, water begins to flow inside the case, hitting the board, processor and causing short circuits.

First steps to save your phone

If your phone falls into water, you should not panic; it is better to try to remove it from the liquid as quickly as possible. After all, the longer the phone is in water, the greater the likelihood of damage to the motherboard components. Most people in such a situation will immediately begin to press all sorts of buttons to check the functionality of the phone, but this absolutely cannot be done to avoid a short circuit.

However, if the smartphone has a non-removable battery and remains on after the dive, then the first thing you need to do is turn it on using the power button, and if the battery is removable, then immediately remove it from the phone. Along with the battery, you also need to remove the SIM card and memory card. Next, wipe the phone and its removable parts with a dry cloth and make sure there are no liquid residues.

Under no circumstances should you try to dry your smartphone with a hairdryer, nor should you blow into the phone or shake it, as such actions may cause water to get into other components of the device. You can get rid of moisture inside your phone using the following 5 methods.

Isopropyl and ethyl alcohols

For many years, isopropyl and ethyl alcohols have been available and inexpensive products that have been used to clean radio circuit boards. As mentioned earlier, the main reason for device failure is corrosion of the motherboard elements, and isopropyl alcohol contains chemical elements that help prevent this corrosion and remove moisture. Also, their modern analogues are water-based cleaning liquids; such liquids are not conductors of electric current, and their evaporation occurs instantly.

The fact is that when water turns into ice, its molecules have less conductive effect due to the increase in the distance between the molecules, which prevents a short circuit.

If the phone does not turn on the first time, then try repeating the procedure again, and after several attempts your phone will most likely turn on.

However, if you keep your smartphone in the refrigerator, you can get the opposite effect and make the situation worse.

Drying your phone with absorbents

The method is already familiar to many, as it is very popular on the Internet. One of these substances is rice. It's no secret that rice absorbs moisture, and in theory, submerging your phone in a suitable container of rice should do the same trick for it.

This method has an undeniable advantage, since it eliminates the possibility of carelessly turning on the device while there is a large amount of moisture inside it. However, this method does not guarantee complete restoration of the smartphone, because the water contained can cause oxidation of the contacts and elements of the device’s motherboard and, as a result, lead to negative consequences.

Compressed air

The main purpose of this method is to try to speed up the drying process. The best option in this case is a cylinder with compressed air inside. Such cylinders are often used when cleaning hard-to-reach components, computer motherboards and laptops from dust.

To implement this method, pass air using a balloon through various openings of the phone: speakers, microphone, charging connector and audio connector. Cleaning should be focused on the charging port, as it is closest to the battery compartment, which will give you more room for air to move.

Remember that this method is more of a preventative measure and will not eliminate moisture as effectively as possible.

Synthetic dehumidifiers

This solution provides a quick and easy way to rid your phone of water that has gotten into it. On the vast expanses of well-known Internet sites there are many similar accessories for small electronic devices.

Synthetic desiccants are hermetically sealed plastic bags with special granules inside that effectively absorb moisture. The only disadvantage of this method is the cost. In our countries, such accessories are not in great demand, and not everyone would dare to pay 1,200 rubles for them.

Also remember that none of the above methods is a guarantee that your phone will be completely restored. And if first aid for your smartphone is unsuccessful, contact a repair center. We wish that such troubles do not arise in your life!